| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20191211140444.7076-1-andrew.smirnov@gmail.com>
Date: Wed, 11 Dec 2019 06:04:43 -0800
From: Andrey Smirnov <andrew.smirnov@...il.com>
To: linux-arm-kernel@...ts.infradead.org
Cc: Andrey Smirnov <andrew.smirnov@...il.com>,
Shawn Guo <shawnguo@...nel.org>,
Chris Healy <cphealy@...il.com>,
Cory Tusar <cory.tusar@....aero>,
Fabio Estevam <festevam@...il.com>,
linux-kernel@...r.kernel.org
Subject: [PATCH v2 1/2] ARM: dts: vf610-zii-scu4-aib: Use generic names for DT nodes
The devicetree specification recommends using generic node names.
Some ZII dts files already follow such recommendation, but some don't,
so use generic node names for consistency among the ZII dts files.
Signed-off-by: Andrey Smirnov <andrew.smirnov@...il.com>
Cc: Shawn Guo <shawnguo@...nel.org>
Cc: Chris Healy <cphealy@...il.com>
Cc: Cory Tusar <cory.tusar@....aero>
Cc: Fabio Estevam <festevam@...il.com>
Cc: linux-arm-kernel@...ts.infradead.org
Cc: linux-kernel@...r.kernel.org
---
Changes since [v1]:
- Rebased on top of 12/05 linux-next
- Added "ARM: dts: vf610-zii-scu4-aib: Add node for switch
watchdog" to this series, which was previously accidental and
implicit prerequisite for this patch
[v1] lore.kernel.org/lkml/20190824002747.14610-1-andrew.smirnov@...il.com
arch/arm/boot/dts/vf610-zii-scu4-aib.dts | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
index d7caf618f980..a02c7ea3b92d 100644
--- a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
+++ b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
@@ -407,7 +407,7 @@
pinctrl-0 = <&pinctrl_dspi1>;
status = "okay";
- spi-flash@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
@@ -420,7 +420,7 @@
};
};
- spi-flash@1 {
+ flash@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
@@ -509,7 +509,7 @@
#gpio-cells = <2>;
};
- lm75@48 {
+ temp-sensor@48 {
compatible = "national,lm75";
reg = <0x48>;
};
@@ -524,7 +524,7 @@
reg = <0x52>;
};
- ds1682@6b {
+ elapsed-time-recorder@6b {
compatible = "dallas,ds1682";
reg = <0x6b>;
};
@@ -536,7 +536,7 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- adt7411@4a {
+ adc@4a {
compatible = "adi,adt7411";
reg = <0x4a>;
};
@@ -548,7 +548,7 @@
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
- gpio9: sx1503q@20 {
+ gpio9: io-expander@20 {
compatible = "semtech,sx1503q";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sx1503_20>;
@@ -559,12 +559,12 @@
interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
};
- lm75@4e {
+ temp-sensor@4e {
compatible = "national,lm75";
reg = <0x4e>;
};
- lm75@4f {
+ temp-sensor@4f {
compatible = "national,lm75";
reg = <0x4f>;
};
@@ -576,17 +576,17 @@
reg = <0x23>;
};
- adt7411@4a {
+ adc@4a {
compatible = "adi,adt7411";
reg = <0x4a>;
};
- at24c08@54 {
+ eeprom@54 {
compatible = "atmel,24c08";
reg = <0x54>;
};
- tca9548@70 {
+ i2c-mux@70 {
compatible = "nxp,pca9548";
pinctrl-names = "default";
#address-cells = <1>;
@@ -625,7 +625,7 @@
};
};
- tca9548@71 {
+ i2c-mux@71 {
compatible = "nxp,pca9548";
pinctrl-names = "default";
reg = <0x71>;
--
2.21.0
Powered by blists - more mailing lists