[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20191211145208.24976-1-m.szyprowski@samsung.com>
Date: Wed, 11 Dec 2019 15:52:08 +0100
From: Marek Szyprowski <m.szyprowski@...sung.com>
To: linux-usb@...r.kernel.org, linux-samsung-soc@...r.kernel.org,
linux-mediatek@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org
Cc: Marek Szyprowski <m.szyprowski@...sung.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Krzysztof Kozlowski <krzk@...nel.org>,
Matthias Brugger <matthias.bgg@...il.com>,
Maxime Ripard <mripard@...nel.org>,
Chen-Yu Tsai <wens@...e.org>, Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Stefan Agner <stefan@...er.ch>,
Chunfeng Yun <chunfeng.yun@...iatek.com>,
Linus Walleij <linus.walleij@...aro.org>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
Subject: [PATCH v2 2/4] ARM: dts: qcom: Correct USB3503 GPIOs polarity
Current USB3503 driver ignores GPIO polarity and always operates as if the
GPIO lines were flagged as ACTIVE_HIGH. Fix the polarity for the existing
USB3503 chip applications to match the chip specification and common
convention for naming the pins. The only pin, which has to be ACTIVE_LOW
is the reset pin. The remaining are ACTIVE_HIGH. This change allows later
to fix the USB3503 driver to properly use generic GPIO bindings and read
polarity from DT.
Signed-off-by: Marek Szyprowski <m.szyprowski@...sung.com>
---
arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts b/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts
index 26160c324802..942e3a2cac35 100644
--- a/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts
+++ b/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts
@@ -143,7 +143,7 @@
compatible = "smsc,usb3503a";
reg = <0x8>;
connect-gpios = <&gpioext2 1 GPIO_ACTIVE_HIGH>;
- intn-gpios = <&gpioext2 0 GPIO_ACTIVE_LOW>;
+ intn-gpios = <&gpioext2 0 GPIO_ACTIVE_HIGH>;
initial-mode = <1>;
};
};
--
2.17.1
Powered by blists - more mailing lists