| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20191211150343.152008812@linuxfoundation.org>
Date: Wed, 11 Dec 2019 16:03:42 +0100
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Michal Simek <michal.simek@...inx.com>,
Sasha Levin <sashal@...nel.org>
Subject: [PATCH 4.19 060/243] arm64: dts: zynqmp: Fix node names which contain "_"
From: Michal Simek <michal.simek@...inx.com>
[ Upstream commit d1d4445abffb2b17e841d37b555b6f1364b571c1 ]
s/_/-/ for node names.
It fixes warnings like this:
... Warning (node_name_chars_strict): /cpu_opp_table:
Character '_' not recommended in node name ...
Issues reported by make dtbs W=12
Signed-off-by: Michal Simek <michal.simek@...inx.com>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
arch/arm64/boot/dts/xilinx/zynqmp-clk.dtsi | 4 ++--
arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts | 4 ++--
arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts | 10 +++++-----
arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts | 2 +-
arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts | 2 +-
arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 4 ++--
6 files changed, 13 insertions(+), 13 deletions(-)
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-clk.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-clk.dtsi
index 9c09baca7dd78..306ad2157c988 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-clk.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-clk.dtsi
@@ -58,13 +58,13 @@
clock-accuracy = <100>;
};
- dpdma_clk: dpdma_clk {
+ dpdma_clk: dpdma-clk {
compatible = "fixed-clock";
#clock-cells = <0x0>;
clock-frequency = <533000000>;
};
- drm_clock: drm_clock {
+ drm_clock: drm-clock {
compatible = "fixed-clock";
#clock-cells = <0x0>;
clock-frequency = <262750000>;
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
index 8954c8c6f5475..14062b4535dd7 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
@@ -82,7 +82,7 @@
linux,default-trigger = "bluetooth-power";
};
- vbus_det { /* U5 USB5744 VBUS detection via MIO25 */
+ vbus-det { /* U5 USB5744 VBUS detection via MIO25 */
label = "vbus_det";
gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
default-state = "on";
@@ -98,7 +98,7 @@
regulator-boot-on;
};
- sdio_pwrseq: sdio_pwrseq {
+ sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&gpio 7 GPIO_ACTIVE_LOW>; /* WIFI_EN */
post-power-on-delay-ms = <10>;
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
index 25dd574853235..d3b8e1a9c0761 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
@@ -53,7 +53,7 @@
leds {
compatible = "gpio-leds";
- heartbeat_led {
+ heartbeat-led {
label = "heartbeat";
gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
@@ -139,25 +139,25 @@
* 7, 10 - 17 - not connected
*/
- gtr_sel0 {
+ gtr-sel0 {
gpio-hog;
gpios = <0 0>;
output-low; /* PCIE = 0, DP = 1 */
line-name = "sel0";
};
- gtr_sel1 {
+ gtr-sel1 {
gpio-hog;
gpios = <1 0>;
output-high; /* PCIE = 0, DP = 1 */
line-name = "sel1";
};
- gtr_sel2 {
+ gtr-sel2 {
gpio-hog;
gpios = <2 0>;
output-high; /* PCIE = 0, USB0 = 1 */
line-name = "sel2";
};
- gtr_sel3 {
+ gtr-sel3 {
gpio-hog;
gpios = <3 0>;
output-high; /* PCIE = 0, SATA = 1 */
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
index 259f21b0c0014..28dee4dad82c2 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
@@ -53,7 +53,7 @@
leds {
compatible = "gpio-leds";
- heartbeat_led {
+ heartbeat-led {
label = "heartbeat";
gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
index a61b3cc6f4c95..47b5989035e4e 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
@@ -53,7 +53,7 @@
leds {
compatible = "gpio-leds";
- heartbeat_led {
+ heartbeat-led {
label = "heartbeat";
gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index 29ce23422acf2..a516c0e01429a 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -71,7 +71,7 @@
};
};
- cpu_opp_table: cpu_opp_table {
+ cpu_opp_table: cpu-opp-table {
compatible = "operating-points-v2";
opp-shared;
opp00 {
@@ -124,7 +124,7 @@
<1 10 0xf08>;
};
- amba_apu: amba_apu@0 {
+ amba_apu: amba-apu@0 {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
--
2.20.1
Powered by blists - more mailing lists