lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20191211150341.456666899@linuxfoundation.org>
Date:   Wed, 11 Dec 2019 16:03:14 +0100
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org,
        Vincent Whitchurch <vincent.whitchurch@...s.com>,
        Russell King <rmk+kernel@...linux.org.uk>,
        Sasha Levin <sashal@...nel.org>
Subject: [PATCH 4.19 032/243] ARM: 8813/1: Make aligned 2-byte getuser()/putuser() atomic on ARMv6+

From: Vincent Whitchurch <vincent.whitchurch@...s.com>

[ Upstream commit 344eb5539abf3e0b6ce22568c03e86450073e097 ]

getuser() and putuser() (and there underscored variants) use two
strb[t]/ldrb[t] instructions when they are asked to get/put 16-bits.
This means that the read/write is not atomic even when performed to a
16-bit-aligned address.

This leads to problems with vhost: vhost uses __getuser() to read the
vring's 16-bit avail.index field, and if it happens to observe a partial
update of the index, wrong descriptors will be used which will lead to a
breakdown of the virtio communication.  A similar problem exists for
__putuser() which is used to write to the vring's used.index field.

The reason these functions use strb[t]/ldrb[t] is because strht/ldrht
instructions did not exist until ARMv6T2/ARMv7.  So we should be easily
able to fix this on ARMv7.  Also, since all ARMv6 processors also don't
actually use the unprivileged instructions anymore for uaccess (since
CONFIG_CPU_USE_DOMAINS is not used) we can easily fix them too.

Signed-off-by: Vincent Whitchurch <vincent.whitchurch@...s.com>
Signed-off-by: Russell King <rmk+kernel@...linux.org.uk>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
 arch/arm/include/asm/uaccess.h | 18 ++++++++++++++++++
 arch/arm/lib/getuser.S         | 11 +++++++++++
 arch/arm/lib/putuser.S         | 20 ++++++++++----------
 3 files changed, 39 insertions(+), 10 deletions(-)

diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
index c136eef8f690b..6390a40f16e73 100644
--- a/arch/arm/include/asm/uaccess.h
+++ b/arch/arm/include/asm/uaccess.h
@@ -349,6 +349,13 @@ do {									\
 #define __get_user_asm_byte(x, addr, err)			\
 	__get_user_asm(x, addr, err, ldrb)
 
+#if __LINUX_ARM_ARCH__ >= 6
+
+#define __get_user_asm_half(x, addr, err)			\
+	__get_user_asm(x, addr, err, ldrh)
+
+#else
+
 #ifndef __ARMEB__
 #define __get_user_asm_half(x, __gu_addr, err)			\
 ({								\
@@ -367,6 +374,8 @@ do {									\
 })
 #endif
 
+#endif /* __LINUX_ARM_ARCH__ >= 6 */
+
 #define __get_user_asm_word(x, addr, err)			\
 	__get_user_asm(x, addr, err, ldr)
 #endif
@@ -442,6 +451,13 @@ do {									\
 #define __put_user_asm_byte(x, __pu_addr, err)			\
 	__put_user_asm(x, __pu_addr, err, strb)
 
+#if __LINUX_ARM_ARCH__ >= 6
+
+#define __put_user_asm_half(x, __pu_addr, err)			\
+	__put_user_asm(x, __pu_addr, err, strh)
+
+#else
+
 #ifndef __ARMEB__
 #define __put_user_asm_half(x, __pu_addr, err)			\
 ({								\
@@ -458,6 +474,8 @@ do {									\
 })
 #endif
 
+#endif /* __LINUX_ARM_ARCH__ >= 6 */
+
 #define __put_user_asm_word(x, __pu_addr, err)			\
 	__put_user_asm(x, __pu_addr, err, str)
 
diff --git a/arch/arm/lib/getuser.S b/arch/arm/lib/getuser.S
index 746e7801dcdf7..b2e4bc3a635e2 100644
--- a/arch/arm/lib/getuser.S
+++ b/arch/arm/lib/getuser.S
@@ -42,6 +42,12 @@ _ASM_NOKPROBE(__get_user_1)
 
 ENTRY(__get_user_2)
 	check_uaccess r0, 2, r1, r2, __get_user_bad
+#if __LINUX_ARM_ARCH__ >= 6
+
+2: TUSER(ldrh)	r2, [r0]
+
+#else
+
 #ifdef CONFIG_CPU_USE_DOMAINS
 rb	.req	ip
 2:	ldrbt	r2, [r0], #1
@@ -56,6 +62,9 @@ rb	.req	r0
 #else
 	orr	r2, rb, r2, lsl #8
 #endif
+
+#endif /* __LINUX_ARM_ARCH__ >= 6 */
+
 	mov	r0, #0
 	ret	lr
 ENDPROC(__get_user_2)
@@ -145,7 +154,9 @@ _ASM_NOKPROBE(__get_user_bad8)
 .pushsection __ex_table, "a"
 	.long	1b, __get_user_bad
 	.long	2b, __get_user_bad
+#if __LINUX_ARM_ARCH__ < 6
 	.long	3b, __get_user_bad
+#endif
 	.long	4b, __get_user_bad
 	.long	5b, __get_user_bad8
 	.long	6b, __get_user_bad8
diff --git a/arch/arm/lib/putuser.S b/arch/arm/lib/putuser.S
index 38d660d3705f4..515eeaa9975c6 100644
--- a/arch/arm/lib/putuser.S
+++ b/arch/arm/lib/putuser.S
@@ -41,16 +41,13 @@ ENDPROC(__put_user_1)
 
 ENTRY(__put_user_2)
 	check_uaccess r0, 2, r1, ip, __put_user_bad
-	mov	ip, r2, lsr #8
-#ifdef CONFIG_THUMB2_KERNEL
-#ifndef __ARMEB__
-2: TUSER(strb)	r2, [r0]
-3: TUSER(strb)	ip, [r0, #1]
+#if __LINUX_ARM_ARCH__ >= 6
+
+2: TUSER(strh)	r2, [r0]
+
 #else
-2: TUSER(strb)	ip, [r0]
-3: TUSER(strb)	r2, [r0, #1]
-#endif
-#else	/* !CONFIG_THUMB2_KERNEL */
+
+	mov	ip, r2, lsr #8
 #ifndef __ARMEB__
 2: TUSER(strb)	r2, [r0], #1
 3: TUSER(strb)	ip, [r0]
@@ -58,7 +55,8 @@ ENTRY(__put_user_2)
 2: TUSER(strb)	ip, [r0], #1
 3: TUSER(strb)	r2, [r0]
 #endif
-#endif	/* CONFIG_THUMB2_KERNEL */
+
+#endif /* __LINUX_ARM_ARCH__ >= 6 */
 	mov	r0, #0
 	ret	lr
 ENDPROC(__put_user_2)
@@ -91,7 +89,9 @@ ENDPROC(__put_user_bad)
 .pushsection __ex_table, "a"
 	.long	1b, __put_user_bad
 	.long	2b, __put_user_bad
+#if __LINUX_ARM_ARCH__ < 6
 	.long	3b, __put_user_bad
+#endif
 	.long	4b, __put_user_bad
 	.long	5b, __put_user_bad
 	.long	6b, __put_user_bad
-- 
2.20.1



Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ