| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1576337630-78576-7-git-send-email-zhouyanjie@wanyeetech.com>
Date: Sat, 14 Dec 2019 23:33:50 +0800
From: 周琰杰 (Zhou Yanjie)
<zhouyanjie@...yeetech.com>
To: linux-mips@...r.kernel.org
Cc: linux-kernel@...r.kernel.org, linux-clk@...r.kernel.org,
devicetree@...r.kernel.org, robh+dt@...nel.org,
paul.burton@...s.com, paulburton@...nel.org, paul@...pouillou.net,
mturquette@...libre.com, sboyd@...nel.org, mark.rutland@....com,
sernia.zhou@...mail.com, zhenwenjin@...il.com
Subject: [PATCH v3 5/5] clk: Ingenic: Add CGU driver for X1830.
Add support for the clocks provided by the CGU in the Ingenic X1830
SoC, making use of the cgu code to do the heavy lifting.
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@...yeetech.com>
---
Notes:
v1->v2:
1.Use two fields (pll_reg & bypass_reg) instead of the 2-values
array (reg[2]).
2.Remove the "pll_info->version" and add a "pll_info->rate_multiplier".
3.Change my Signed-off-by from "Zhou Yanjie <zhouyanjie@...o.com>"
to "周琰杰 (Zhou Yanjie) <zhouyanjie@...yeetech.com>" because
the old mailbox is in an unstable state.
v2->v3:
Adjust order from [4/5] in v2 to [5/5] in v3.
drivers/clk/ingenic/Kconfig | 10 ++
drivers/clk/ingenic/Makefile | 1 +
drivers/clk/ingenic/x1830-cgu.c | 340 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 351 insertions(+)
create mode 100644 drivers/clk/ingenic/x1830-cgu.c
diff --git a/drivers/clk/ingenic/Kconfig b/drivers/clk/ingenic/Kconfig
index b4555b4..580b0cf 100644
--- a/drivers/clk/ingenic/Kconfig
+++ b/drivers/clk/ingenic/Kconfig
@@ -55,6 +55,16 @@ config INGENIC_CGU_X1000
If building for a X1000 SoC, you want to say Y here.
+config INGENIC_CGU_X1830
+ bool "Ingenic X1830 CGU driver"
+ default MACH_X1830
+ select INGENIC_CGU_COMMON
+ help
+ Support the clocks provided by the CGU hardware on Ingenic X1830
+ and compatible SoCs.
+
+ If building for a X1830 SoC, you want to say Y here.
+
config INGENIC_TCU_CLK
bool "Ingenic JZ47xx TCU clocks driver"
default MACH_INGENIC
diff --git a/drivers/clk/ingenic/Makefile b/drivers/clk/ingenic/Makefile
index 8b1dad9..aaa4bff 100644
--- a/drivers/clk/ingenic/Makefile
+++ b/drivers/clk/ingenic/Makefile
@@ -5,4 +5,5 @@ obj-$(CONFIG_INGENIC_CGU_JZ4725B) += jz4725b-cgu.o
obj-$(CONFIG_INGENIC_CGU_JZ4770) += jz4770-cgu.o
obj-$(CONFIG_INGENIC_CGU_JZ4780) += jz4780-cgu.o
obj-$(CONFIG_INGENIC_CGU_X1000) += x1000-cgu.o
+obj-$(CONFIG_INGENIC_CGU_X1830) += x1830-cgu.o
obj-$(CONFIG_INGENIC_TCU_CLK) += tcu.o
diff --git a/drivers/clk/ingenic/x1830-cgu.c b/drivers/clk/ingenic/x1830-cgu.c
new file mode 100644
index 00000000..35ea05f
--- /dev/null
+++ b/drivers/clk/ingenic/x1830-cgu.c
@@ -0,0 +1,340 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * X1830 SoC CGU driver
+ * Copyright (c) 2019 周琰杰 (Zhou Yanjie) <zhouyanjie@...yeetech.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+#include <dt-bindings/clock/x1830-cgu.h>
+#include "cgu.h"
+#include "pm.h"
+
+/* CGU register offsets */
+#define CGU_REG_CPCCR 0x00
+#define CGU_REG_CPPCR 0x0c
+#define CGU_REG_APLL 0x10
+#define CGU_REG_MPLL 0x14
+#define CGU_REG_CLKGR0 0x20
+#define CGU_REG_OPCR 0x24
+#define CGU_REG_CLKGR1 0x28
+#define CGU_REG_DDRCDR 0x2c
+#define CGU_REG_USBPCR 0x3c
+#define CGU_REG_USBRDT 0x40
+#define CGU_REG_USBVBFIL 0x44
+#define CGU_REG_USBPCR1 0x48
+#define CGU_REG_MACCDR 0x54
+#define CGU_REG_EPLL 0x58
+#define CGU_REG_I2SCDR 0x60
+#define CGU_REG_LPCDR 0x64
+#define CGU_REG_MSC0CDR 0x68
+#define CGU_REG_I2SCDR1 0x70
+#define CGU_REG_SSICDR 0x74
+#define CGU_REG_CIMCDR 0x7c
+#define CGU_REG_MSC1CDR 0xa4
+#define CGU_REG_CMP_INTR 0xb0
+#define CGU_REG_CMP_INTRE 0xb4
+#define CGU_REG_DRCG 0xd0
+#define CGU_REG_CPCSR 0xd4
+#define CGU_REG_VPLL 0xe0
+#define CGU_REG_MACPHYC 0xe8
+
+/* bits within the OPCR register */
+#define OPCR_SPENDN0 BIT(7)
+#define OPCR_SPENDN1 BIT(6)
+
+static struct ingenic_cgu *cgu;
+
+static const s8 pll_od_encoding[64] = {
+ 0x0, 0x1, -1, 0x2, -1, -1, -1, 0x3,
+ -1, -1, -1, -1, -1, -1, -1, 0x4,
+ -1, -1, -1, -1, -1, -1, -1, -1,
+ -1, -1, -1, -1, -1, -1, -1, 0x5,
+ -1, -1, -1, -1, -1, -1, -1, -1,
+ -1, -1, -1, -1, -1, -1, -1, -1,
+ -1, -1, -1, -1, -1, -1, -1, -1,
+ -1, -1, -1, -1, -1, -1, -1, 0x6,
+};
+
+static const struct ingenic_cgu_clk_info x1830_cgu_clocks[] = {
+
+ /* External clocks */
+
+ [X1830_CLK_EXCLK] = { "ext", CGU_CLK_EXT },
+ [X1830_CLK_RTCLK] = { "rtc", CGU_CLK_EXT },
+
+ /* PLLs */
+
+ [X1830_CLK_APLL] = {
+ "apll", CGU_CLK_PLL,
+ .parents = { X1830_CLK_EXCLK, -1, -1, -1 },
+ .pll = {
+ .pll_reg = CGU_REG_APLL,
+ .bypass_reg = CGU_REG_CPPCR,
+ .rate_multiplier = 2,
+ .m_shift = 20,
+ .m_bits = 9,
+ .m_offset = 1,
+ .n_shift = 14,
+ .n_bits = 6,
+ .n_offset = 1,
+ .od_shift = 11,
+ .od_bits = 3,
+ .od_max = 64,
+ .od_encoding = pll_od_encoding,
+ .bypass_bit = 30,
+ .enable_bit = 0,
+ .stable_bit = 3,
+ },
+ },
+
+ [X1830_CLK_MPLL] = {
+ "mpll", CGU_CLK_PLL,
+ .parents = { X1830_CLK_EXCLK, -1, -1, -1 },
+ .pll = {
+ .pll_reg = CGU_REG_MPLL,
+ .bypass_reg = CGU_REG_CPPCR,
+ .rate_multiplier = 2,
+ .m_shift = 20,
+ .m_bits = 9,
+ .m_offset = 1,
+ .n_shift = 14,
+ .n_bits = 6,
+ .n_offset = 1,
+ .od_shift = 11,
+ .od_bits = 3,
+ .od_max = 64,
+ .od_encoding = pll_od_encoding,
+ .bypass_bit = 28,
+ .enable_bit = 0,
+ .stable_bit = 3,
+ },
+ },
+
+ [X1830_CLK_EPLL] = {
+ "epll", CGU_CLK_PLL,
+ .parents = { X1830_CLK_EXCLK, -1, -1, -1 },
+ .pll = {
+ .pll_reg = CGU_REG_EPLL,
+ .bypass_reg = CGU_REG_CPPCR,
+ .rate_multiplier = 2,
+ .m_shift = 20,
+ .m_bits = 9,
+ .m_offset = 1,
+ .n_shift = 14,
+ .n_bits = 6,
+ .n_offset = 1,
+ .od_shift = 11,
+ .od_bits = 3,
+ .od_max = 64,
+ .od_encoding = pll_od_encoding,
+ .bypass_bit = 24,
+ .enable_bit = 0,
+ .stable_bit = 3,
+ },
+ },
+
+ [X1830_CLK_VPLL] = {
+ "vpll", CGU_CLK_PLL,
+ .parents = { X1830_CLK_EXCLK, -1, -1, -1 },
+ .pll = {
+ .pll_reg = CGU_REG_VPLL,
+ .bypass_reg = CGU_REG_CPPCR,
+ .rate_multiplier = 2,
+ .m_shift = 20,
+ .m_bits = 9,
+ .m_offset = 1,
+ .n_shift = 14,
+ .n_bits = 6,
+ .n_offset = 1,
+ .od_shift = 11,
+ .od_bits = 3,
+ .od_max = 64,
+ .od_encoding = pll_od_encoding,
+ .bypass_bit = 26,
+ .enable_bit = 0,
+ .stable_bit = 3,
+ },
+ },
+
+ /* Muxes & dividers */
+
+ [X1830_CLK_SCLKA] = {
+ "sclk_a", CGU_CLK_MUX,
+ .parents = { -1, X1830_CLK_EXCLK, X1830_CLK_APLL, -1 },
+ .mux = { CGU_REG_CPCCR, 30, 2 },
+ },
+
+ [X1830_CLK_CPUMUX] = {
+ "cpu_mux", CGU_CLK_MUX,
+ .parents = { -1, X1830_CLK_SCLKA, X1830_CLK_MPLL, -1 },
+ .mux = { CGU_REG_CPCCR, 28, 2 },
+ },
+
+ [X1830_CLK_CPU] = {
+ "cpu", CGU_CLK_DIV,
+ .parents = { X1830_CLK_CPUMUX, -1, -1, -1 },
+ .div = { CGU_REG_CPCCR, 0, 1, 4, 22, -1, -1 },
+ },
+
+ [X1830_CLK_L2CACHE] = {
+ "l2cache", CGU_CLK_DIV,
+ .parents = { X1830_CLK_CPUMUX, -1, -1, -1 },
+ .div = { CGU_REG_CPCCR, 4, 1, 4, 22, -1, -1 },
+ },
+
+ [X1830_CLK_AHB0] = {
+ "ahb0", CGU_CLK_MUX | CGU_CLK_DIV,
+ .parents = { -1, X1830_CLK_SCLKA, X1830_CLK_MPLL, -1 },
+ .mux = { CGU_REG_CPCCR, 26, 2 },
+ .div = { CGU_REG_CPCCR, 8, 1, 4, 21, -1, -1 },
+ },
+
+ [X1830_CLK_AHB2PMUX] = {
+ "ahb2_apb_mux", CGU_CLK_MUX,
+ .parents = { -1, X1830_CLK_SCLKA, X1830_CLK_MPLL, -1 },
+ .mux = { CGU_REG_CPCCR, 24, 2 },
+ },
+
+ [X1830_CLK_AHB2] = {
+ "ahb2", CGU_CLK_DIV,
+ .parents = { X1830_CLK_AHB2PMUX, -1, -1, -1 },
+ .div = { CGU_REG_CPCCR, 12, 1, 4, 20, -1, -1 },
+ },
+
+ [X1830_CLK_PCLK] = {
+ "pclk", CGU_CLK_DIV,
+ .parents = { X1830_CLK_AHB2PMUX, -1, -1, -1 },
+ .div = { CGU_REG_CPCCR, 16, 1, 4, 20, -1, -1 },
+ },
+
+ [X1830_CLK_DDR] = {
+ "ddr", CGU_CLK_MUX | CGU_CLK_DIV | CGU_CLK_GATE,
+ .parents = { -1, X1830_CLK_SCLKA, X1830_CLK_MPLL, -1 },
+ .mux = { CGU_REG_DDRCDR, 30, 2 },
+ .div = { CGU_REG_DDRCDR, 0, 1, 4, 29, 28, 27 },
+ .gate = { CGU_REG_CLKGR0, 31 },
+ },
+
+ [X1830_CLK_MAC] = {
+ "mac", CGU_CLK_MUX | CGU_CLK_DIV | CGU_CLK_GATE,
+ .parents = { X1830_CLK_SCLKA, X1830_CLK_MPLL,
+ X1830_CLK_VPLL, X1830_CLK_EPLL },
+ .mux = { CGU_REG_MACCDR, 30, 2 },
+ .div = { CGU_REG_MACCDR, 0, 1, 8, 29, 28, 27 },
+ .gate = { CGU_REG_CLKGR1, 4 },
+ },
+
+ [X1830_CLK_MSCMUX] = {
+ "msc_mux", CGU_CLK_MUX,
+ .parents = { X1830_CLK_SCLKA, X1830_CLK_MPLL,
+ X1830_CLK_VPLL, X1830_CLK_EPLL },
+ .mux = { CGU_REG_MSC0CDR, 30, 2 },
+ },
+
+ [X1830_CLK_MSC0] = {
+ "msc0", CGU_CLK_DIV | CGU_CLK_GATE,
+ .parents = { X1830_CLK_MSCMUX, -1, -1, -1 },
+ .div = { CGU_REG_MSC0CDR, 0, 2, 8, 29, 28, 27 },
+ .gate = { CGU_REG_CLKGR0, 4 },
+ },
+
+ [X1830_CLK_MSC1] = {
+ "msc1", CGU_CLK_DIV | CGU_CLK_GATE,
+ .parents = { X1830_CLK_MSCMUX, -1, -1, -1 },
+ .div = { CGU_REG_MSC1CDR, 0, 2, 8, 29, 28, 27 },
+ .gate = { CGU_REG_CLKGR0, 5 },
+ },
+
+ [X1830_CLK_SSIPLL] = {
+ "ssi_pll", CGU_CLK_MUX | CGU_CLK_DIV,
+ .parents = { X1830_CLK_SCLKA, X1830_CLK_MPLL,
+ X1830_CLK_VPLL, X1830_CLK_EPLL },
+ .mux = { CGU_REG_SSICDR, 30, 2 },
+ .div = { CGU_REG_SSICDR, 0, 1, 8, 28, 27, 26 },
+ },
+
+ [X1830_CLK_SSIMUX] = {
+ "ssi_mux", CGU_CLK_MUX,
+ .parents = { X1830_CLK_EXCLK, X1830_CLK_SSIPLL, -1, -1 },
+ .mux = { CGU_REG_SSICDR, 29, 1 },
+ },
+
+ /* Gate-only clocks */
+
+ [X1830_CLK_SSI0] = {
+ "ssi0", CGU_CLK_GATE,
+ .parents = { X1830_CLK_SSIMUX, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR0, 6 },
+ },
+
+ [X1830_CLK_SMB0] = {
+ "smb0", CGU_CLK_GATE,
+ .parents = { X1830_CLK_PCLK, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR0, 7 },
+ },
+
+ [X1830_CLK_SMB1] = {
+ "smb1", CGU_CLK_GATE,
+ .parents = { X1830_CLK_PCLK, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR0, 8 },
+ },
+
+ [X1830_CLK_SMB2] = {
+ "smb2", CGU_CLK_GATE,
+ .parents = { X1830_CLK_PCLK, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR0, 9 },
+ },
+
+ [X1830_CLK_UART0] = {
+ "uart0", CGU_CLK_GATE,
+ .parents = { X1830_CLK_EXCLK, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR0, 14 },
+ },
+
+ [X1830_CLK_UART1] = {
+ "uart1", CGU_CLK_GATE,
+ .parents = { X1830_CLK_EXCLK, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR0, 15 },
+ },
+
+ [X1830_CLK_SSI1] = {
+ "ssi1", CGU_CLK_GATE,
+ .parents = { X1830_CLK_SSIMUX, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR0, 19 },
+ },
+
+ [X1830_CLK_SFC] = {
+ "sfc", CGU_CLK_GATE,
+ .parents = { X1830_CLK_SSIPLL, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR0, 20 },
+ },
+
+ [X1830_CLK_PDMA] = {
+ "pdma", CGU_CLK_GATE,
+ .parents = { X1830_CLK_EXCLK, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR0, 21 },
+ },
+};
+
+static void __init x1830_cgu_init(struct device_node *np)
+{
+ int retval;
+
+ cgu = ingenic_cgu_new(x1830_cgu_clocks,
+ ARRAY_SIZE(x1830_cgu_clocks), np);
+ if (!cgu) {
+ pr_err("%s: failed to initialise CGU\n", __func__);
+ return;
+ }
+
+ retval = ingenic_cgu_register_clocks(cgu);
+ if (retval) {
+ pr_err("%s: failed to register CGU Clocks\n", __func__);
+ return;
+ }
+
+ ingenic_cgu_register_syscore_ops(cgu);
+}
+CLK_OF_DECLARE_DRIVER(x1830_cgu, "ingenic,x1830-cgu", x1830_cgu_init);
--
2.7.4
Powered by blists - more mailing lists