Date:   Sun, 15 Dec 2019 09:38:17 -0800
From:   Tony Lindgren <tony@...mide.com>
To:     Evgeniy Polyakov <zbr@...emap.net>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc:     linux-kernel@...r.kernel.org, linux-omap@...r.kernel.org,
        Adam Ford <aford173@...il.com>,
        "Andrew F . Davis" <afd@...com>,
        Andreas Kemnade <andreas@...nade.info>,
        "H . Nikolaus Schaller" <hns@...delico.com>,
        Vignesh R <vigneshr@...com>
Subject: [PATCH] w1: omap-hdq: Simplify driver with PM runtime autosuspend

We've had generic code handling module sysconfig and OCP reset registers
for omap variants for many years now and all the drivers really needs to
do is just call runtime PM functions.

Looks like the omap-hdq driver got only partially updated over the years
to use runtime PM, and still has lots of custom PM code left.

We can replace all the custom code for sysconfig, OCP reset, and PM with
just a few lines of runtime PM autosuspend code.

Note that the earlier driver specific usage count limit of four seems
completely artificial and should not be an issue in normal use.

Cc: Adam Ford <aford173@...il.com>
Cc: Andrew F. Davis <afd@...com>
Cc: Andreas Kemnade <andreas@...nade.info>
Cc: H. Nikolaus Schaller <hns@...delico.com>
Cc: Vignesh R <vigneshr@...com>
Signed-off-by: Tony Lindgren <tony@...mide.com>
---


Can you guys please review and and test on gta04 and torpedo?


 drivers/w1/masters/omap_hdq.c | 286 +++++++++++-----------------------
 1 file changed, 90 insertions(+), 196 deletions(-)

diff --git a/drivers/w1/masters/omap_hdq.c b/drivers/w1/masters/omap_hdq.c
--- a/drivers/w1/masters/omap_hdq.c
+++ b/drivers/w1/masters/omap_hdq.c
@@ -38,12 +38,6 @@
 #define OMAP_HDQ_INT_STATUS_TXCOMPLETE		BIT(2)
 #define OMAP_HDQ_INT_STATUS_RXCOMPLETE		BIT(1)
 #define OMAP_HDQ_INT_STATUS_TIMEOUT		BIT(0)
-#define OMAP_HDQ_SYSCONFIG			0x14
-#define OMAP_HDQ_SYSCONFIG_SOFTRESET		BIT(1)
-#define OMAP_HDQ_SYSCONFIG_AUTOIDLE		BIT(0)
-#define OMAP_HDQ_SYSCONFIG_NOIDLE		0x0
-#define OMAP_HDQ_SYSSTATUS			0x18
-#define OMAP_HDQ_SYSSTATUS_RESETDONE		BIT(0)
 
 #define OMAP_HDQ_FLAG_CLEAR			0
 #define OMAP_HDQ_FLAG_SET			1
@@ -62,17 +56,9 @@ struct hdq_data {
 	void __iomem		*hdq_base;
 	/* lock status update */
 	struct  mutex		hdq_mutex;
-	int			hdq_usecount;
 	u8			hdq_irqstatus;
 	/* device lock */
 	spinlock_t		hdq_spinlock;
-	/*
-	 * Used to control the call to omap_hdq_get and omap_hdq_put.
-	 * HDQ Protocol: Write the CMD|REG_address first, followed by
-	 * the data wrire or read.
-	 */
-	int			init_trans;
-	int                     rrw;
 	/* mode: 0-HDQ 1-W1 */
 	int                     mode;
 
@@ -237,41 +223,6 @@ static void omap_w1_search_bus(void *_hdq, struct w1_master *master_dev,
 	slave_found(master_dev, id);
 }
 
-static int _omap_hdq_reset(struct hdq_data *hdq_data)
-{
-	int ret;
-	u8 tmp_status;
-
-	hdq_reg_out(hdq_data, OMAP_HDQ_SYSCONFIG,
-		    OMAP_HDQ_SYSCONFIG_SOFTRESET);
-	/*
-	 * Select HDQ/1W mode & enable clocks.
-	 * It is observed that INT flags can't be cleared via a read and GO/INIT
-	 * won't return to zero if interrupt is disabled. So we always enable
-	 * interrupt.
-	 */
-	hdq_reg_out(hdq_data, OMAP_HDQ_CTRL_STATUS,
-		OMAP_HDQ_CTRL_STATUS_CLOCKENABLE |
-		OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK);
-
-	/* wait for reset to complete */
-	ret = hdq_wait_for_flag(hdq_data, OMAP_HDQ_SYSSTATUS,
-		OMAP_HDQ_SYSSTATUS_RESETDONE, OMAP_HDQ_FLAG_SET, &tmp_status);
-	if (ret)
-		dev_dbg(hdq_data->dev, "timeout waiting HDQ reset, %x",
-				tmp_status);
-	else {
-		hdq_reg_out(hdq_data, OMAP_HDQ_CTRL_STATUS,
-			OMAP_HDQ_CTRL_STATUS_CLOCKENABLE |
-			OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK |
-			hdq_data->mode);
-		hdq_reg_out(hdq_data, OMAP_HDQ_SYSCONFIG,
-			OMAP_HDQ_SYSCONFIG_AUTOIDLE);
-	}
-
-	return ret;
-}
-
 /* Issue break pulse to the device */
 static int omap_hdq_break(struct hdq_data *hdq_data)
 {
@@ -357,7 +308,7 @@ static int hdq_read_byte(struct hdq_data *hdq_data, u8 *val)
 		goto rtn;
 	}
 
-	if (!hdq_data->hdq_usecount) {
+	if (pm_runtime_suspended(hdq_data->dev)) {
 		ret = -EINVAL;
 		goto out;
 	}
@@ -394,80 +345,6 @@ static int hdq_read_byte(struct hdq_data *hdq_data, u8 *val)
 
 }
 
-/* Enable clocks and set the controller to HDQ/1W mode */
-static int omap_hdq_get(struct hdq_data *hdq_data)
-{
-	int ret = 0;
-
-	ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
-	if (ret < 0) {
-		ret = -EINTR;
-		goto rtn;
-	}
-
-	if (OMAP_HDQ_MAX_USER == hdq_data->hdq_usecount) {
-		dev_dbg(hdq_data->dev, "attempt to exceed the max use count");
-		ret = -EINVAL;
-		goto out;
-	} else {
-		hdq_data->hdq_usecount++;
-		try_module_get(THIS_MODULE);
-		if (1 == hdq_data->hdq_usecount) {
-
-			pm_runtime_get_sync(hdq_data->dev);
-
-			/* make sure HDQ/1W is out of reset */
-			if (!(hdq_reg_in(hdq_data, OMAP_HDQ_SYSSTATUS) &
-				OMAP_HDQ_SYSSTATUS_RESETDONE)) {
-				ret = _omap_hdq_reset(hdq_data);
-				if (ret)
-					/* back up the count */
-					hdq_data->hdq_usecount--;
-			} else {
-				/* select HDQ/1W mode & enable clocks */
-				hdq_reg_out(hdq_data, OMAP_HDQ_CTRL_STATUS,
-					OMAP_HDQ_CTRL_STATUS_CLOCKENABLE |
-					OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK |
-					hdq_data->mode);
-				hdq_reg_out(hdq_data, OMAP_HDQ_SYSCONFIG,
-					OMAP_HDQ_SYSCONFIG_NOIDLE);
-				hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS);
-			}
-		}
-	}
-
-out:
-	mutex_unlock(&hdq_data->hdq_mutex);
-rtn:
-	return ret;
-}
-
-/* Disable clocks to the module */
-static int omap_hdq_put(struct hdq_data *hdq_data)
-{
-	int ret = 0;
-
-	ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
-	if (ret < 0)
-		return -EINTR;
-
-	hdq_reg_out(hdq_data, OMAP_HDQ_SYSCONFIG,
-		    OMAP_HDQ_SYSCONFIG_AUTOIDLE);
-	if (0 == hdq_data->hdq_usecount) {
-		dev_dbg(hdq_data->dev, "attempt to decrement use count"
-			" when it is zero");
-		ret = -EINVAL;
-	} else {
-		hdq_data->hdq_usecount--;
-		module_put(THIS_MODULE);
-		if (0 == hdq_data->hdq_usecount)
-			pm_runtime_put_sync(hdq_data->dev);
-	}
-	mutex_unlock(&hdq_data->hdq_mutex);
-
-	return ret;
-}
-
 /*
  * W1 triplet callback function - used for searching ROM addresses.
  * Registered only when controller is in 1-wire mode.
@@ -482,7 +359,12 @@ static u8 omap_w1_triplet(void *_hdq, u8 bdir)
 		  OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK;
 	u8 mask = ctrl | OMAP_HDQ_CTRL_STATUS_DIR;
 
-	omap_hdq_get(_hdq);
+	err = pm_runtime_get_sync(hdq_data->dev);
+	if (err < 0) {
+		pm_runtime_put_noidle(hdq_data->dev);
+
+		return err;
+	}
 
 	err = mutex_lock_interruptible(&hdq_data->hdq_mutex);
 	if (err < 0) {
@@ -549,16 +431,30 @@ static u8 omap_w1_triplet(void *_hdq, u8 bdir)
 out:
 	mutex_unlock(&hdq_data->hdq_mutex);
 rtn:
-	omap_hdq_put(_hdq);
+	pm_runtime_mark_last_busy(hdq_data->dev);
+	pm_runtime_put_autosuspend(hdq_data->dev);
+
 	return ret;
 }
 
 /* reset callback */
 static u8 omap_w1_reset_bus(void *_hdq)
 {
-	omap_hdq_get(_hdq);
-	omap_hdq_break(_hdq);
-	omap_hdq_put(_hdq);
+	struct hdq_data *hdq_data = _hdq;
+	int err;
+
+	err = pm_runtime_get_sync(hdq_data->dev);
+	if (err < 0) {
+		pm_runtime_put_noidle(hdq_data->dev);
+
+		return err;
+	}
+
+	omap_hdq_break(hdq_data);
+
+	pm_runtime_mark_last_busy(hdq_data->dev);
+	pm_runtime_put_autosuspend(hdq_data->dev);
+
 	return 0;
 }
 
@@ -569,37 +465,25 @@ static u8 omap_w1_read_byte(void *_hdq)
 	u8 val = 0;
 	int ret;
 
-	/* First write to initialize the transfer */
-	if (hdq_data->init_trans == 0)
-		omap_hdq_get(hdq_data);
+	ret = pm_runtime_get_sync(hdq_data->dev);
+	if (ret < 0) {
+		pm_runtime_put_noidle(hdq_data->dev);
+
+		return ret;
+	}
 
 	ret = hdq_read_byte(hdq_data, &val);
 	if (ret) {
-		ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
-		if (ret < 0) {
-			dev_dbg(hdq_data->dev, "Could not acquire mutex\n");
-			return -EINTR;
-		}
-		hdq_data->init_trans = 0;
-		mutex_unlock(&hdq_data->hdq_mutex);
-		omap_hdq_put(hdq_data);
-		return -1;
+		ret = -1;
+		goto out_err;
 	}
 
 	hdq_disable_interrupt(hdq_data, OMAP_HDQ_CTRL_STATUS,
 			      ~OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK);
 
-	/* Write followed by a read, release the module */
-	if (hdq_data->init_trans) {
-		ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
-		if (ret < 0) {
-			dev_dbg(hdq_data->dev, "Could not acquire mutex\n");
-			return -EINTR;
-		}
-		hdq_data->init_trans = 0;
-		mutex_unlock(&hdq_data->hdq_mutex);
-		omap_hdq_put(hdq_data);
-	}
+out_err:
+	pm_runtime_mark_last_busy(hdq_data->dev);
+	pm_runtime_put_autosuspend(hdq_data->dev);
 
 	return val;
 }
@@ -611,9 +495,12 @@ static void omap_w1_write_byte(void *_hdq, u8 byte)
 	int ret;
 	u8 status;
 
-	/* First write to initialize the transfer */
-	if (hdq_data->init_trans == 0)
-		omap_hdq_get(hdq_data);
+	ret = pm_runtime_get_sync(hdq_data->dev);
+	if (ret < 0) {
+		pm_runtime_put_noidle(hdq_data->dev);
+
+		return;
+	}
 
 	/*
 	 * We need to reset the slave before
@@ -623,31 +510,15 @@ static void omap_w1_write_byte(void *_hdq, u8 byte)
 	if (byte == W1_SKIP_ROM)
 		omap_hdq_break(hdq_data);
 
-	ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
-	if (ret < 0) {
-		dev_dbg(hdq_data->dev, "Could not acquire mutex\n");
-		return;
-	}
-	hdq_data->init_trans++;
-	mutex_unlock(&hdq_data->hdq_mutex);
-
 	ret = hdq_write_byte(hdq_data, byte, &status);
 	if (ret < 0) {
 		dev_dbg(hdq_data->dev, "TX failure:Ctrl status %x\n", status);
-		return;
+		goto out_err;
 	}
 
-	/* Second write, data transferred. Release the module */
-	if (hdq_data->init_trans > 1) {
-		omap_hdq_put(hdq_data);
-		ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
-		if (ret < 0) {
-			dev_dbg(hdq_data->dev, "Could not acquire mutex\n");
-			return;
-		}
-		hdq_data->init_trans = 0;
-		mutex_unlock(&hdq_data->hdq_mutex);
-	}
+out_err:
+	pm_runtime_mark_last_busy(hdq_data->dev);
+	pm_runtime_put_autosuspend(hdq_data->dev);
 }
 
 static struct w1_bus_master omap_w1_master = {
@@ -656,6 +527,35 @@ static struct w1_bus_master omap_w1_master = {
 	.reset_bus	= omap_w1_reset_bus,
 };
 
+static int __maybe_unused omap_hdq_runtime_suspend(struct device *dev)
+{
+	struct hdq_data *hdq_data = dev_get_drvdata(dev);
+
+	hdq_reg_out(hdq_data, 0, hdq_data->mode);
+	hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS);
+
+	return 0;
+}
+
+static int __maybe_unused omap_hdq_runtime_resume(struct device *dev)
+{
+	struct hdq_data *hdq_data = dev_get_drvdata(dev);
+
+	/* select HDQ/1W mode & enable clocks */
+	hdq_reg_out(hdq_data, OMAP_HDQ_CTRL_STATUS,
+		    OMAP_HDQ_CTRL_STATUS_CLOCKENABLE |
+		    OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK |
+		    hdq_data->mode);
+	hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS);
+
+	return 0;
+}
+
+static const struct dev_pm_ops omap_hdq_pm_ops = {
+	SET_RUNTIME_PM_OPS(omap_hdq_runtime_suspend,
+			   omap_hdq_runtime_resume, NULL)
+};
+
 static int omap_hdq_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -677,23 +577,18 @@ static int omap_hdq_probe(struct platform_device *pdev)
 	if (IS_ERR(hdq_data->hdq_base))
 		return PTR_ERR(hdq_data->hdq_base);
 
-	hdq_data->hdq_usecount = 0;
-	hdq_data->rrw = 0;
 	mutex_init(&hdq_data->hdq_mutex);
 
 	pm_runtime_enable(&pdev->dev);
+	pm_runtime_use_autosuspend(&pdev->dev);
+	pm_runtime_set_autosuspend_delay(&pdev->dev, 300);
 	ret = pm_runtime_get_sync(&pdev->dev);
 	if (ret < 0) {
+		pm_runtime_put_noidle(&pdev->dev);
 		dev_dbg(&pdev->dev, "pm_runtime_get_sync failed\n");
 		goto err_w1;
 	}
 
-	ret = _omap_hdq_reset(hdq_data);
-	if (ret) {
-		dev_dbg(&pdev->dev, "reset failed\n");
-		goto err_irq;
-	}
-
 	rev = hdq_reg_in(hdq_data, OMAP_HDQ_REVISION);
 	dev_info(&pdev->dev, "OMAP HDQ Hardware Rev %c.%c. Driver in %s mode\n",
 		(rev >> 4) + '0', (rev & 0x0f) + '0', "Interrupt");
@@ -715,7 +610,8 @@ static int omap_hdq_probe(struct platform_device *pdev)
 
 	omap_hdq_break(hdq_data);
 
-	pm_runtime_put_sync(&pdev->dev);
+	pm_runtime_mark_last_busy(&pdev->dev);
+	pm_runtime_put_autosuspend(&pdev->dev);
 
 	ret = of_property_read_string(pdev->dev.of_node, "ti,mode", &mode);
 	if (ret < 0 || !strcmp(mode, "hdq")) {
@@ -739,6 +635,7 @@ static int omap_hdq_probe(struct platform_device *pdev)
 err_irq:
 	pm_runtime_put_sync(&pdev->dev);
 err_w1:
+	pm_runtime_dont_use_autosuspend(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 
 	return ret;
@@ -746,23 +643,19 @@ static int omap_hdq_probe(struct platform_device *pdev)
 
 static int omap_hdq_remove(struct platform_device *pdev)
 {
-	struct hdq_data *hdq_data = platform_get_drvdata(pdev);
-
-	mutex_lock(&hdq_data->hdq_mutex);
+	int active;
 
-	if (hdq_data->hdq_usecount) {
-		dev_dbg(&pdev->dev, "removed when use count is not zero\n");
-		mutex_unlock(&hdq_data->hdq_mutex);
-		return -EBUSY;
-	}
+	active = pm_runtime_get_sync(&pdev->dev);
+	if (active < 0)
+		pm_runtime_put_noidle(&pdev->dev);
 
-	mutex_unlock(&hdq_data->hdq_mutex);
+	w1_remove_master_device(&omap_w1_master);
 
-	/* remove module dependency */
+	pm_runtime_dont_use_autosuspend(&pdev->dev);
+	if (active >= 0)
+		pm_runtime_put_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 
-	w1_remove_master_device(&omap_w1_master);
-
 	return 0;
 }
 
@@ -779,6 +672,7 @@ static struct platform_driver omap_hdq_driver = {
 	.driver = {
 		.name =	"omap_hdq",
 		.of_match_table = omap_hdq_dt_ids,
+		.pm = &omap_hdq_pm_ops,
 	},
 };
 module_platform_driver(omap_hdq_driver);
-- 
2.24.1

Powered by blists - more mailing lists