[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAFBinCAsoE3zFEKbS1Tag=Y_honnpfin625u=N+7QMv4cPy2Wg@mail.gmail.com>
Date: Sun, 15 Dec 2019 21:34:55 +0100
From: Martin Blumenstingl <martin.blumenstingl@...glemail.com>
To: Remi Pommarel <repk@...plefau.lt>
Cc: Neil Armstrong <narmstrong@...libre.com>,
Jerome Brunet <jbrunet@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Kevin Hilman <khilman@...libre.com>,
Michael Turquette <mturquette@...libre.com>,
linux-kernel@...r.kernel.org, linux-amlogic@...ts.infradead.org,
linux-clk@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v2] clk: meson: pll: Fix by 0 division in __pll_params_to_rate()
On Sun, Dec 15, 2019 at 12:39 PM Remi Pommarel <repk@...plefau.lt> wrote:
>
> Some meson pll registers can be initialized with 0 as N value, introducing
> the following division by 0 when computing rate :
>
> UBSAN: Undefined behaviour in drivers/clk/meson/clk-pll.c:75:9
> division by zero
> CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.4.0-rc3-608075-g86c9af8630e1-dirty #400
> Call trace:
> dump_backtrace+0x0/0x1c0
> show_stack+0x14/0x20
> dump_stack+0xc4/0x100
> ubsan_epilogue+0x14/0x68
> __ubsan_handle_divrem_overflow+0x98/0xb8
> __pll_params_to_rate+0xdc/0x140
> meson_clk_pll_recalc_rate+0x278/0x3a0
> __clk_register+0x7c8/0xbb0
> devm_clk_hw_register+0x54/0xc0
> meson_eeclkc_probe+0xf4/0x1a0
> platform_drv_probe+0x54/0xd8
> really_probe+0x16c/0x438
> driver_probe_device+0xb0/0xf0
> device_driver_attach+0x94/0xa0
> __driver_attach+0x70/0x108
> bus_for_each_dev+0xd8/0x128
> driver_attach+0x30/0x40
> bus_add_driver+0x1b0/0x2d8
> driver_register+0xbc/0x1d0
> __platform_driver_register+0x78/0x88
> axg_driver_init+0x18/0x20
> do_one_initcall+0xc8/0x24c
> kernel_init_freeable+0x2b0/0x344
> kernel_init+0x10/0x128
> ret_from_fork+0x10/0x18
>
> This checks if N is null before doing the division.
>
> Fixes: 7a29a869434e ("clk: meson: Add support for Meson clock controller")
> Signed-off-by: Remi Pommarel <repk@...plefau.lt>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@...glemail.com>
thank you for the patch Remi!
Martin
Powered by blists - more mailing lists