linux-kernel - [PATCH 5.4 018/177] usb: host: xhci-tegra: Correct phy enable sequence

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20191216174816.557705483@linuxfoundation.org>
Date:   Mon, 16 Dec 2019 18:47:54 +0100
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org, Nagarjuna Kristam <nkristam@...dia.com>,
        Jui Chang Kuo <jckuo@...dia.com>,
        Jon Hunter <jonathanh@...dia.com>,
        Thierry Reding <treding@...dia.com>
Subject: [PATCH 5.4 018/177] usb: host: xhci-tegra: Correct phy enable sequence

From: Nagarjuna Kristam <nkristam@...dia.com>

commit 6351653febbb784d86fdf83afe41f7523a61b392 upstream.

XUSB phy needs to be enabled before un-powergating the power partitions.
However in the current sequence, it happens opposite. Correct the phy
enable and powergating partition sequence to avoid any boot hangs.

Signed-off-by: Nagarjuna Kristam <nkristam@...dia.com>
Cc: stable <stable@...r.kernel.org>
Signed-off-by: Jui Chang Kuo <jckuo@...dia.com>
Tested-by: Jon Hunter <jonathanh@...dia.com>
Acked-by: Thierry Reding <treding@...dia.com>
Link: https://lore.kernel.org/r/1572859470-7823-1-git-send-email-nkristam@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>

---
 drivers/usb/host/xhci-tegra.c |   25 +++++++++++++------------
 1 file changed, 13 insertions(+), 12 deletions(-)

--- a/drivers/usb/host/xhci-tegra.c
+++ b/drivers/usb/host/xhci-tegra.c
@@ -755,7 +755,6 @@ static int tegra_xusb_runtime_suspend(st
 {
 	struct tegra_xusb *tegra = dev_get_drvdata(dev);
 
-	tegra_xusb_phy_disable(tegra);
 	regulator_bulk_disable(tegra->soc->num_supplies, tegra->supplies);
 	tegra_xusb_clk_disable(tegra);
 
@@ -779,16 +778,8 @@ static int tegra_xusb_runtime_resume(str
 		goto disable_clk;
 	}
 
-	err = tegra_xusb_phy_enable(tegra);
-	if (err < 0) {
-		dev_err(dev, "failed to enable PHYs: %d\n", err);
-		goto disable_regulator;
-	}
-
 	return 0;
 
-disable_regulator:
-	regulator_bulk_disable(tegra->soc->num_supplies, tegra->supplies);
 disable_clk:
 	tegra_xusb_clk_disable(tegra);
 	return err;
@@ -1181,6 +1172,12 @@ static int tegra_xusb_probe(struct platf
 	 */
 	platform_set_drvdata(pdev, tegra);
 
+	err = tegra_xusb_phy_enable(tegra);
+	if (err < 0) {
+		dev_err(&pdev->dev, "failed to enable PHYs: %d\n", err);
+		goto put_hcd;
+	}
+
 	pm_runtime_enable(&pdev->dev);
 	if (pm_runtime_enabled(&pdev->dev))
 		err = pm_runtime_get_sync(&pdev->dev);
@@ -1189,7 +1186,7 @@ static int tegra_xusb_probe(struct platf
 
 	if (err < 0) {
 		dev_err(&pdev->dev, "failed to enable device: %d\n", err);
-		goto disable_rpm;
+		goto disable_phy;
 	}
 
 	tegra_xusb_config(tegra, regs);
@@ -1275,9 +1272,11 @@ remove_usb2:
 put_rpm:
 	if (!pm_runtime_status_suspended(&pdev->dev))
 		tegra_xusb_runtime_suspend(&pdev->dev);
-disable_rpm:
-	pm_runtime_disable(&pdev->dev);
+put_hcd:
 	usb_put_hcd(tegra->hcd);
+disable_phy:
+	tegra_xusb_phy_disable(tegra);
+	pm_runtime_disable(&pdev->dev);
 put_powerdomains:
 	if (!of_property_read_bool(pdev->dev.of_node, "power-domains")) {
 		tegra_powergate_power_off(TEGRA_POWERGATE_XUSBC);
@@ -1314,6 +1313,8 @@ static int tegra_xusb_remove(struct plat
 		tegra_xusb_powerdomain_remove(&pdev->dev, tegra);
 	}
 
+	tegra_xusb_phy_disable(tegra);
+
 	tegra_xusb_padctl_put(tegra->padctl);
 
 	return 0;