[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20191216174828.678820673@linuxfoundation.org>
Date: Mon, 16 Dec 2019 18:48:12 +0100
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, "H. Nikolaus Schaller" <hns@...delico.com>,
Tony Lindgren <tony@...mide.com>,
Ulf Hansson <ulf.hansson@...aro.org>
Subject: [PATCH 5.4 036/177] ARM: dts: pandora-common: define wl1251 as child node of mmc3
From: H. Nikolaus Schaller <hns@...delico.com>
commit 4f9007d692017cef38baf2a9b82b7879d5b2407b upstream.
Since v4.7 the dma initialization requires that there is a
device tree property for "rx" and "tx" channels which is
not provided by the pdata-quirks initialization.
By conversion of the mmc3 setup to device tree this will
finally allows to remove the OpenPandora wlan specific omap3
data-quirks.
Fixes: 81eef6ca9201 ("mmc: omap_hsmmc: Use dma_request_chan() for requesting DMA channel")
Signed-off-by: H. Nikolaus Schaller <hns@...delico.com>
Cc: <stable@...r.kernel.org> # v4.7+
Acked-by: Tony Lindgren <tony@...mide.com>
Signed-off-by: Ulf Hansson <ulf.hansson@...aro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
arch/arm/boot/dts/omap3-pandora-common.dtsi | 36 ++++++++++++++++++++++++++--
1 file changed, 34 insertions(+), 2 deletions(-)
--- a/arch/arm/boot/dts/omap3-pandora-common.dtsi
+++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi
@@ -226,6 +226,17 @@
gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* GPIO_164 */
};
+ /* wl1251 wifi+bt module */
+ wlan_en: fixed-regulator-wg7210_en {
+ compatible = "regulator-fixed";
+ regulator-name = "vwlan";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ startup-delay-us = <50000>;
+ enable-active-high;
+ gpio = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+ };
+
/* wg7210 (wifi+bt module) 32k clock buffer */
wg7210_32k: fixed-regulator-wg7210_32k {
compatible = "regulator-fixed";
@@ -522,9 +533,30 @@
/*wp-gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;*/ /* GPIO_127 */
};
-/* mmc3 is probed using pdata-quirks to pass wl1251 card data */
&mmc3 {
- status = "disabled";
+ vmmc-supply = <&wlan_en>;
+
+ bus-width = <4>;
+ non-removable;
+ ti,non-removable;
+ cap-power-off-card;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc3_pins>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wlan: wifi@1 {
+ compatible = "ti,wl1251";
+
+ reg = <1>;
+
+ interrupt-parent = <&gpio1>;
+ interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_21 */
+
+ ti,wl1251-has-eeprom;
+ };
};
/* bluetooth*/
Powered by blists - more mailing lists