linux-kernel - [PATCH 5.3 084/180] s390/mm: properly clear _PAGE

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20191216174831.832761010@linuxfoundation.org>
Date:   Mon, 16 Dec 2019 18:48:44 +0100
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org,
        Gerald Schaefer <gerald.schaefer@...ibm.com>,
        Vasily Gorbik <gor@...ux.ibm.com>
Subject: [PATCH 5.3 084/180] s390/mm: properly clear _PAGE_NOEXEC bit when it is not supported

From: Gerald Schaefer <gerald.schaefer@...ibm.com>

commit ab874f22d35a8058d8fdee5f13eb69d8867efeae upstream.

On older HW or under a hypervisor, w/o the instruction-execution-
protection (IEP) facility, and also w/o EDAT-1, a translation-specification
exception may be recognized when bit 55 of a pte is one (_PAGE_NOEXEC).

The current code tries to prevent setting _PAGE_NOEXEC in such cases,
by removing it within set_pte_at(). However, ptep_set_access_flags()
will modify a pte directly, w/o using set_pte_at(). There is at least
one scenario where this can result in an active pte with _PAGE_NOEXEC
set, which would then lead to a panic due to a translation-specification
exception (write to swapped out page):

do_swap_page
  pte = mk_pte (with _PAGE_NOEXEC bit)
  set_pte_at   (will remove _PAGE_NOEXEC bit in page table, but keep it
                in local variable pte)
  vmf->orig_pte = pte (pte still contains _PAGE_NOEXEC bit)
  do_wp_page
    wp_page_reuse
      entry = vmf->orig_pte (still with _PAGE_NOEXEC bit)
      ptep_set_access_flags (writes entry with _PAGE_NOEXEC bit)

Fix this by clearing _PAGE_NOEXEC already in mk_pte_phys(), where the
pgprot value is applied, so that no pte with _PAGE_NOEXEC will ever be
visible, if it is not supported. The check in set_pte_at() can then also
be removed.

Cc: <stable@...r.kernel.org> # 4.11+
Fixes: 57d7f939e7bd ("s390: add no-execute support")
Signed-off-by: Gerald Schaefer <gerald.schaefer@...ibm.com>
Signed-off-by: Vasily Gorbik <gor@...ux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>

---
 arch/s390/include/asm/pgtable.h |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/s390/include/asm/pgtable.h
+++ b/arch/s390/include/asm/pgtable.h
@@ -1172,8 +1172,6 @@ void gmap_pmdp_idte_global(struct mm_str
 static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
 			      pte_t *ptep, pte_t entry)
 {
-	if (!MACHINE_HAS_NX)
-		pte_val(entry) &= ~_PAGE_NOEXEC;
 	if (pte_present(entry))
 		pte_val(entry) &= ~_PAGE_UNUSED;
 	if (mm_has_pgste(mm))
@@ -1190,6 +1188,8 @@ static inline pte_t mk_pte_phys(unsigned
 {
 	pte_t __pte;
 	pte_val(__pte) = physpage + pgprot_val(pgprot);
+	if (!MACHINE_HAS_NX)
+		pte_val(__pte) &= ~_PAGE_NOEXEC;
 	return pte_mkyoung(__pte);
 }