| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20191216205122.1850923-6-hdegoede@redhat.com>
Date: Mon, 16 Dec 2019 21:51:22 +0100
From: Hans de Goede <hdegoede@...hat.com>
To: Jani Nikula <jani.nikula@...ux.intel.com>,
Joonas Lahtinen <joonas.lahtinen@...ux.intel.com>,
Rodrigo Vivi <rodrigo.vivi@...el.com>,
Ville Syrjälä
<ville.syrjala@...ux.intel.com>,
intel-gfx <intel-gfx@...ts.freedesktop.org>,
Lee Jones <lee.jones@...aro.org>,
Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
Linus Walleij <linus.walleij@...aro.org>
Cc: Hans de Goede <hdegoede@...hat.com>,
dri-devel@...ts.freedesktop.org, linux-kernel@...r.kernel.org,
linux-gpio@...r.kernel.org
Subject: [PATCH v2 5/5] drm/i915/dsi: Control panel and backlight enable GPIOs on BYT
On Bay Trail devices the MIPI power on/off sequences for DSI LCD panels
do not control the LCD panel- and backlight-enable GPIOs. So far, when
the VBT indicates we should use the SoC for backlight control, we have
been relying on these GPIOs being configured as output and driven high by
the Video BIOS (GOP) when it initializes the panel.
This does not work when the device is booted with a HDMI monitor connected
as then the GOP will initialize the HDMI instead of the panel, leaving the
panel black, even though the i915 driver tries to output an image to it.
Likewise on some device-models when the GOP does not initialize the DSI
panel it also leaves the mux of the PWM0 pin in generic GPIO mode instead
of muxing it to the PWM controller.
This commit makes the DSI code control the SoC GPIOs for panel- and
backlight-enable on BYT, when the VBT indicates the SoC should be used
for backlight control. It also ensures that the PWM0 pin is muxed to the
PWM controller in this case.
This fixes the LCD panel not lighting up on various devices when booted
with a HDMI monitor connected. This has been tested to fix this on the
following devices:
Peaq C1010
Point of View MOBII TAB-P800W
Point of View MOBII TAB-P1005W
Terra Pad 1061
Yours Y8W81
Reviewed-by: Linus Walleij <linus.walleij@...aro.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@...ux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@...hat.com>
---
drivers/gpu/drm/i915/display/intel_dsi.h | 3 +-
drivers/gpu/drm/i915/display/intel_dsi_vbt.c | 64 ++++++++++++++++++++
2 files changed, 66 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/display/intel_dsi.h b/drivers/gpu/drm/i915/display/intel_dsi.h
index 675771ea91aa..7481a5aa3084 100644
--- a/drivers/gpu/drm/i915/display/intel_dsi.h
+++ b/drivers/gpu/drm/i915/display/intel_dsi.h
@@ -45,8 +45,9 @@ struct intel_dsi {
struct intel_dsi_host *dsi_hosts[I915_MAX_PORTS];
intel_wakeref_t io_wakeref[I915_MAX_PORTS];
- /* GPIO Desc for CRC based Panel control */
+ /* GPIO Desc for panel and backlight control */
struct gpio_desc *gpio_panel;
+ struct gpio_desc *gpio_backlight;
struct intel_connector *attached_connector;
diff --git a/drivers/gpu/drm/i915/display/intel_dsi_vbt.c b/drivers/gpu/drm/i915/display/intel_dsi_vbt.c
index 89558ccf79c8..0032161e0f76 100644
--- a/drivers/gpu/drm/i915/display/intel_dsi_vbt.c
+++ b/drivers/gpu/drm/i915/display/intel_dsi_vbt.c
@@ -27,6 +27,8 @@
#include <linux/gpio/consumer.h>
#include <linux/gpio/machine.h>
#include <linux/mfd/intel_soc_pmic.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/pinctrl/machine.h>
#include <linux/slab.h>
#include <asm/intel-mid.h>
@@ -525,11 +527,15 @@ void intel_dsi_vbt_exec_sequence(struct intel_dsi *intel_dsi,
{
if (seq_id == MIPI_SEQ_POWER_ON && intel_dsi->gpio_panel)
gpiod_set_value_cansleep(intel_dsi->gpio_panel, 1);
+ if (seq_id == MIPI_SEQ_BACKLIGHT_ON && intel_dsi->gpio_backlight)
+ gpiod_set_value_cansleep(intel_dsi->gpio_backlight, 1);
intel_dsi_vbt_exec(intel_dsi, seq_id);
if (seq_id == MIPI_SEQ_POWER_OFF && intel_dsi->gpio_panel)
gpiod_set_value_cansleep(intel_dsi->gpio_panel, 0);
+ if (seq_id == MIPI_SEQ_BACKLIGHT_OFF && intel_dsi->gpio_backlight)
+ gpiod_set_value_cansleep(intel_dsi->gpio_backlight, 0);
}
void intel_dsi_msleep(struct intel_dsi *intel_dsi, int msec)
@@ -688,6 +694,8 @@ bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
/*
* On some BYT/CHT devs some sequences are incomplete and we need to manually
* control some GPIOs. We need to add a GPIO lookup table before we get these.
+ * If the GOP did not initialize the panel (HDMI inserted) we may need to also
+ * change the pinmux for the SoC's PWM0 pin from GPIO to PWM.
*/
static struct gpiod_lookup_table pmic_panel_gpio_table = {
/* Intel GFX is consumer */
@@ -699,23 +707,69 @@ static struct gpiod_lookup_table pmic_panel_gpio_table = {
},
};
+static struct gpiod_lookup_table soc_panel_gpio_table = {
+ .dev_id = "0000:00:02.0",
+ .table = {
+ GPIO_LOOKUP("INT33FC:01", 10, "backlight", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("INT33FC:01", 11, "panel", GPIO_ACTIVE_HIGH),
+ { }
+ },
+};
+
+static const struct pinctrl_map soc_pwm_pinctrl_map[] = {
+ PIN_MAP_MUX_GROUP("0000:00:02.0", "soc_pwm0", "INT33FC:00",
+ "pwm0_grp", "pwm"),
+};
+
void intel_dsi_vbt_gpio_init(struct intel_dsi *intel_dsi, bool panel_is_on)
{
struct drm_device *dev = intel_dsi->base.base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
struct mipi_config *mipi_config = dev_priv->vbt.dsi.config;
enum gpiod_flags flags = panel_is_on ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW;
+ bool want_backlight_gpio = false;
+ bool want_panel_gpio = false;
+ struct pinctrl *pinctrl;
+ int ret;
if ((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) &&
mipi_config->pwm_blc == PPS_BLC_PMIC) {
gpiod_add_lookup_table(&pmic_panel_gpio_table);
+ want_panel_gpio = true;
+ }
+
+ if (IS_VALLEYVIEW(dev_priv) && mipi_config->pwm_blc == PPS_BLC_SOC) {
+ gpiod_add_lookup_table(&soc_panel_gpio_table);
+ want_panel_gpio = true;
+ want_backlight_gpio = true;
+ /* Ensure PWM0 pin is muxed as PWM instead of GPIO */
+ ret = pinctrl_register_mappings(soc_pwm_pinctrl_map,
+ ARRAY_SIZE(soc_pwm_pinctrl_map));
+ if (ret)
+ DRM_ERROR("Failed to register pwm0 pinmux mapping\n");
+
+ pinctrl = devm_pinctrl_get_select(dev->dev, "soc_pwm0");
+ if (IS_ERR(pinctrl))
+ DRM_ERROR("Failed to set pinmux to PWM\n");
+ }
+
+ if (want_panel_gpio) {
intel_dsi->gpio_panel = gpiod_get(dev->dev, "panel", flags);
if (IS_ERR(intel_dsi->gpio_panel)) {
DRM_ERROR("Failed to own gpio for panel control\n");
intel_dsi->gpio_panel = NULL;
}
}
+
+ if (want_backlight_gpio) {
+ intel_dsi->gpio_backlight =
+ gpiod_get(dev->dev, "backlight", flags);
+ if (IS_ERR(intel_dsi->gpio_backlight)) {
+ DRM_ERROR("Failed to own gpio for backlight control\n");
+ intel_dsi->gpio_backlight = NULL;
+ }
+ }
}
void intel_dsi_vbt_gpio_cleanup(struct intel_dsi *intel_dsi)
@@ -729,7 +783,17 @@ void intel_dsi_vbt_gpio_cleanup(struct intel_dsi *intel_dsi)
intel_dsi->gpio_panel = NULL;
}
+ if (intel_dsi->gpio_backlight) {
+ gpiod_put(intel_dsi->gpio_backlight);
+ intel_dsi->gpio_backlight = NULL;
+ }
+
if ((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) &&
mipi_config->pwm_blc == PPS_BLC_PMIC)
gpiod_remove_lookup_table(&pmic_panel_gpio_table);
+
+ if (IS_VALLEYVIEW(dev_priv) && mipi_config->pwm_blc == PPS_BLC_SOC) {
+ pinctrl_unregister_mappings(soc_pwm_pinctrl_map);
+ gpiod_remove_lookup_table(&soc_panel_gpio_table);
+ }
}
--
2.23.0
Powered by blists - more mailing lists