| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20191216123645.10099-3-qianggui.song@amlogic.com>
Date: Mon, 16 Dec 2019 20:36:43 +0800
From: Qianggui Song <qianggui.song@...ogic.com>
To: Thomas Gleixner <tglx@...utronix.de>,
Jason Cooper <jason@...edaemon.net>,
Marc Zyngier <maz@...nel.org>
CC: Qianggui Song <qianggui.song@...ogic.com>,
Kevin Hilman <khilman@...libre.com>,
Neil Armstrong <narmstrong@...libre.com>,
Jerome Brunet <jbrunet@...libre.com>,
Jianxin Pan <jianxin.pan@...ogic.com>,
Xingyu Chen <xingyu.chen@...ogic.com>,
Hanjie Lin <hanjie.lin@...ogic.com>,
<linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-amlogic@...ts.infradead.org>
Subject: [PATCH v2 2/4] irqchip/meson-gpio: rework meson irqchip driver to support meson-A1 SoCs
Since Meson-A1 SoCs register layout of gpio interrupt controller has
difference with previous chips, registers to decide irq line and offset
of trigger method are all changed, the current driver should be modified.
Signed-off-by: Qianggui Song <qianggui.song@...ogic.com>
---
drivers/irqchip/irq-meson-gpio.c | 95 +++++++++++++++++++++++---------
1 file changed, 70 insertions(+), 25 deletions(-)
diff --git a/drivers/irqchip/irq-meson-gpio.c b/drivers/irqchip/irq-meson-gpio.c
index 829084b568fa..5a1a59e50bb3 100644
--- a/drivers/irqchip/irq-meson-gpio.c
+++ b/drivers/irqchip/irq-meson-gpio.c
@@ -30,44 +30,75 @@
* stuck at 0. Bits 8 to 15 are responsive and have the expected
* effect.
*/
-#define REG_EDGE_POL_EDGE(x) BIT(x)
-#define REG_EDGE_POL_LOW(x) BIT(16 + (x))
-#define REG_BOTH_EDGE(x) BIT(8 + (x))
-#define REG_EDGE_POL_MASK(x) ( \
- REG_EDGE_POL_EDGE(x) | \
- REG_EDGE_POL_LOW(x) | \
- REG_BOTH_EDGE(x))
+#define REG_EDGE_POL_EDGE(params, x) BIT((params)->edge_single_offset + (x))
+#define REG_EDGE_POL_LOW(params, x) BIT((params)->pol_low_offset + (x))
+#define REG_BOTH_EDGE(params, x) BIT((params)->edge_both_offset + (x))
+#define REG_EDGE_POL_MASK(params, x) ( \
+ REG_EDGE_POL_EDGE(params, x) | \
+ REG_EDGE_POL_LOW(params, x) | \
+ REG_BOTH_EDGE(params, x))
#define REG_PIN_SEL_SHIFT(x) (((x) % 4) * 8)
#define REG_FILTER_SEL_SHIFT(x) ((x) * 4)
+struct meson_gpio_irq_controller;
+static void meson8_gpio_irq_sel_pin(struct meson_gpio_irq_controller *ctl,
+ unsigned int channel, unsigned long hwirq);
+static void meson_gpio_irq_init_dummy(struct meson_gpio_irq_controller *ctl);
+
+struct irq_ctl_ops {
+ void (*gpio_irq_sel_pin)(struct meson_gpio_irq_controller *ctl,
+ unsigned int channel, unsigned long hwirq);
+ void (*gpio_irq_init)(struct meson_gpio_irq_controller *ctl);
+};
+
struct meson_gpio_irq_params {
unsigned int nr_hwirq;
bool support_edge_both;
+ unsigned int edge_both_offset;
+ unsigned int edge_single_offset;
+ unsigned int pol_low_offset;
+ unsigned int pin_sel_mask;
+ struct irq_ctl_ops ops;
};
+#define INIT_MESON_COMMON(irqs, init, sel) \
+ .nr_hwirq = irqs, \
+ .ops = { \
+ .gpio_irq_init = init, \
+ .gpio_irq_sel_pin = sel, \
+ },
+
+#define INIT_MESON8_COMMON_DATA(irqs) \
+ INIT_MESON_COMMON(irqs, meson_gpio_irq_init_dummy, \
+ meson8_gpio_irq_sel_pin) \
+ .edge_single_offset = 0, \
+ .pol_low_offset = 16, \
+ .pin_sel_mask = 0xff, \
+
static const struct meson_gpio_irq_params meson8_params = {
- .nr_hwirq = 134,
+ INIT_MESON8_COMMON_DATA(134)
};
static const struct meson_gpio_irq_params meson8b_params = {
- .nr_hwirq = 119,
+ INIT_MESON8_COMMON_DATA(119)
};
static const struct meson_gpio_irq_params gxbb_params = {
- .nr_hwirq = 133,
+ INIT_MESON8_COMMON_DATA(133)
};
static const struct meson_gpio_irq_params gxl_params = {
- .nr_hwirq = 110,
+ INIT_MESON8_COMMON_DATA(110)
};
static const struct meson_gpio_irq_params axg_params = {
- .nr_hwirq = 100,
+ INIT_MESON8_COMMON_DATA(100)
};
static const struct meson_gpio_irq_params sm1_params = {
- .nr_hwirq = 100,
+ INIT_MESON8_COMMON_DATA(100)
.support_edge_both = true,
+ .edge_both_offset = 8,
};
static const struct of_device_id meson_irq_gpio_matches[] = {
@@ -100,9 +131,22 @@ static void meson_gpio_irq_update_bits(struct meson_gpio_irq_controller *ctl,
writel_relaxed(tmp, ctl->base + reg);
}
-static unsigned int meson_gpio_irq_channel_to_reg(unsigned int channel)
+static void meson_gpio_irq_init_dummy(struct meson_gpio_irq_controller *ctl)
{
- return (channel < 4) ? REG_PIN_03_SEL : REG_PIN_47_SEL;
+}
+
+static void meson8_gpio_irq_sel_pin(struct meson_gpio_irq_controller *ctl,
+ unsigned int channel, unsigned long hwirq)
+{
+ unsigned int reg_offset;
+ unsigned int bit_offset;
+
+ reg_offset = (channel < 4) ? REG_PIN_03_SEL : REG_PIN_47_SEL;
+ bit_offset = REG_PIN_SEL_SHIFT(channel);
+
+ meson_gpio_irq_update_bits(ctl, reg_offset,
+ ctl->params->pin_sel_mask << bit_offset,
+ hwirq << bit_offset);
}
static int
@@ -110,7 +154,7 @@ meson_gpio_irq_request_channel(struct meson_gpio_irq_controller *ctl,
unsigned long hwirq,
u32 **channel_hwirq)
{
- unsigned int reg, idx;
+ unsigned int idx;
spin_lock(&ctl->lock);
@@ -129,10 +173,7 @@ meson_gpio_irq_request_channel(struct meson_gpio_irq_controller *ctl,
* Setup the mux of the channel to route the signal of the pad
* to the appropriate input of the GIC
*/
- reg = meson_gpio_irq_channel_to_reg(idx);
- meson_gpio_irq_update_bits(ctl, reg,
- 0xff << REG_PIN_SEL_SHIFT(idx),
- hwirq << REG_PIN_SEL_SHIFT(idx));
+ ctl->params->ops.gpio_irq_sel_pin(ctl, idx, hwirq);
/*
* Get the hwirq number assigned to this channel through
@@ -173,7 +214,9 @@ static int meson_gpio_irq_type_setup(struct meson_gpio_irq_controller *ctl,
{
u32 val = 0;
unsigned int idx;
+ const struct meson_gpio_irq_params *params;
+ params = ctl->params;
idx = meson_gpio_irq_get_channel_idx(ctl, channel_hwirq);
/*
@@ -190,22 +233,22 @@ static int meson_gpio_irq_type_setup(struct meson_gpio_irq_controller *ctl,
* precedence over the other edge/polarity settings
*/
if (type == IRQ_TYPE_EDGE_BOTH) {
- if (!ctl->params->support_edge_both)
+ if (!params->support_edge_both)
return -EINVAL;
- val |= REG_BOTH_EDGE(idx);
+ val |= REG_BOTH_EDGE(params, idx);
} else {
if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
- val |= REG_EDGE_POL_EDGE(idx);
+ val |= REG_EDGE_POL_EDGE(params, idx);
if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_EDGE_FALLING))
- val |= REG_EDGE_POL_LOW(idx);
+ val |= REG_EDGE_POL_LOW(params, idx);
}
spin_lock(&ctl->lock);
meson_gpio_irq_update_bits(ctl, REG_EDGE_POL,
- REG_EDGE_POL_MASK(idx), val);
+ REG_EDGE_POL_MASK(params, idx), val);
spin_unlock(&ctl->lock);
@@ -371,6 +414,8 @@ static int __init meson_gpio_irq_parse_dt(struct device_node *node,
return ret;
}
+ ctl->params->ops.gpio_irq_init(ctl);
+
return 0;
}
--
2.24.0
Powered by blists - more mailing lists