| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <8d71f459-96a2-4b09-05e1-5f905e9bb3af@ti.com>
Date: Mon, 16 Dec 2019 18:20:30 +0530
From: Vignesh Raghavendra <vigneshr@...com>
To: "Ramuthevar,Vadivel MuruganX"
<vadivel.muruganx.ramuthevar@...ux.intel.com>,
<linux-spi@...r.kernel.org>, <linux-kernel@...r.kernel.org>
CC: <broonie@...nel.org>, <robh+dt@...nel.org>,
<cheol.yong.kim@...el.com>, <qi-ming.wu@...el.com>
Subject: Re: [PATCH v3 1/2] dt-bindings: spi: Add schema for Cadence QSPI
Controller driver
Hi,
On 09/12/19 2:10 pm, Ramuthevar,Vadivel MuruganX wrote:
> From: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@...ux.intel.com>
>
> Add dt-bindings documentation for Cadence-QSPI controller to support
> spi based flash memories.
>
> Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@...ux.intel.com>
> ---
> .../devicetree/bindings/spi/cadence,qspi.yaml | 162 +++++++++++++++++++++
> 1 file changed, 162 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/spi/cadence,qspi.yaml
>
> diff --git a/Documentation/devicetree/bindings/spi/cadence,qspi.yaml b/Documentation/devicetree/bindings/spi/cadence,qspi.yaml
> new file mode 100644
> index 000000000000..7756c34bb453
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/spi/cadence,qspi.yaml
> @@ -0,0 +1,162 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/spi/cadence,qspi.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Cadence QSPI Flash Controller support
> +
> +maintainers:
> + - Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@...ux.intel.com>
> +
> +allOf:
> + - $ref: "spi-controller.yaml#"
> +
> +description: |
> + Add support for the Cadence QSPI controller,This controller is
> + present in the Intel LGM, Altera SoCFPGA and TI SoCs and this driver
> + has been tested On Intel's LGM SoC.
> +
This looks like a commit message. Description should probably says
something like "Binding Documentation for Cadence QSPI controller..."
> + - compatible : should be one of the following:
> + Generic default - "cdns,qspi-nor".
> + For TI 66AK2G SoC - "ti,k2g-qspi", "cdns,qspi-nor".
> + For TI AM654 SoC - "ti,am654-ospi", "cdns,qspi-nor".
> + For Intel LGM SoC - "intel,lgm-qspi", "cdns,qspi-nor".
> +
> +properties:
> + compatible:
> + enum:
This should be:
compatible:
oneOf:
- items:
- enum:
- ti,k2g-qspi
- const: cdns,qspi-nor
- items:
- enum:
- ti,am654-ospi
- const: cdns,qspi-nor
- items:
- enum:
- intel,lgm-qspi
- const: cdns,qspi-nor
- items:
- const: cdns,qspi-nor
> + - cadence,qspi
This wrong and does not match what you is there in description above.
"cadence" is not a valid vendor prefix... It should be "cdns" as per
Documentation/devicetree/bindings/vendor-prefixes.yaml
Have you verified this yaml schema? I see bunch of errors for my platform
> + - cdns,qspi-nor
> + - ti,k2g-qspi
> + - ti,am654-ospi
> + - intel,lgm-qspi
> +
> + reg:
> + description: |
> + Contains two entries, each of which is a tuple consisting of a
> + Physical address and length. The first entry is the address and
> + length of the controller register set. The second entry is the
> + address and length of the QSPI Controller data area.
Don't you need to put a constraint here, like:
maxItems: 2
> +
> + interrupts:
> + description:
> + Unit interrupt specifier for the controller interrupt.
> +
maxItems: 1??
> + clocks:
> + description:
> + phandle to the Quad SPI clock.
> +
maxItems: 1??
> + cdns,fifo-depth:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + Size of the data FIFO in words.
> +
> + cdns,fifo-width:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + Bus width of the data FIFO in bytes.
> +
> + cdns,trigger-address:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + 32-bit indirect AHB trigger address.
> +
> + cdns,is-decoded-cs:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + Flag to indicate whether decoder is used or not.
> +
> + cdns,rclk-en:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: |
> + Flag to indicate that QSPI return clock is used to latch the read data
> + rather than the QSPI clock. Make sure that QSPI return clock is populated
> + on the board before using this property.
> +
> + resets:
> + minItems: 1
> + maxItems: 2
> +
> + reset-names:
> + minItems: 1
> + maxItems: 2
> + items:
> + - const: qspi
> + - const: qspi-ocp
> +
> +# subnode's properties
> +patternProperties:
> + "^.*@[0-9a-fA-F]+$":
> + type: object
> + description:
> + flash device uses the subnodes below defined properties.
> +
> + cdns,read-delay:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + Delay for read capture logic, in clock cycles.
> +
> + cdns,tshsl-ns:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: |
> + Delay in nanoseconds for the length that the master mode chip select
> + outputs are de-asserted between transactions.
> +
> + cdns,tsd2d-ns:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: |
> + Delay in nanoseconds between one chip select being de-activated
> + and the activation of another.
> +
> + cdns,tchsh-ns:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: |
> + Delay in nanoseconds between last bit of current transaction and
> + deasserting the device chip select (qspi_n_ss_out).
> +
> + cdns,tslch-ns:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: |
> + Delay in nanoseconds between setting qspi_n_ss_out low and
> + first bit transfer.
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - clocks
> + - cdns,is-decoded-cs
Not a required property as per existing DT bindings
> + - cdns,fifo-depth
> + - cdns,fifo-width
> + - cdns,trigger-address
> + - resets
> + - reset-names
Again optional properties
> +
> +examples:
> + - |
> + qspi: spi@...05000 {
> + compatible = "cadence,qspi", "cdns,qspi-nor";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0xff705000 0x1000>,
> + <0xffa00000 0x1000>;
> + interrupts = <0 151 4>;
> + clocks = <&qspi_clk>;
> + cdns,is-decoded-cs;
> + cdns,fifo-depth = <128>;
> + cdns,fifo-width = <4>;
> + cdns,trigger-address = <0x00000000>;
> + resets = <&rst QSPI_RESET>, <&rst QSPI_OCP_RESET>;
> + reset-names = "qspi", "qspi-ocp";
> +
> + flash0: n25q00@0 {
> + ...
> + cdns,read-delay = <4>;
> + cdns,tshsl-ns = <50>;
> + cdns,tsd2d-ns = <50>;
> + cdns,tchsh-ns = <4>;
> + cdns,tslch-ns = <4>;
> + };
> + };
> +
>
No blank line before EOF, please
--
Regards
Vignesh
Powered by blists - more mailing lists