lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <26da3a6b-60f3-d09b-6eff-7a3db8234d64@linaro.org>
Date:   Mon, 16 Dec 2019 14:41:10 +0100
From:   Daniel Lezcano <daniel.lezcano@...aro.org>
To:     Navid Emamdoost <navid.emamdoost@...il.com>,
        Michal Simek <michal.simek@...inx.com>
Cc:     Navid Emamdoost <emamd001@....edu>,
        Thomas Gleixner <tglx@...utronix.de>,
        linux-arm-kernel@...ts.infradead.org,
        LKML <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] clocksource/drivers: Fix error handling in
 ttc_setup_clocksource


Hi Navid,

On 14/12/2019 23:54, Navid Emamdoost wrote:
> Would you review this patch, please?

please fix the version number, send without in-reply-to.

Do the same for the other patch:

clocksource/drivers: Fix memory leak in ttc_setup_clockevent

It is a bit confuse what patch is ok or not.

Thanks

  -- Daniel

> On Tue, Oct 22, 2019 at 11:47 PM Navid Emamdoost
> <navid.emamdoost@...il.com> wrote:
>>
>> In the implementation of ttc_setup_clocksource() when
>> clk_notifier_register() fails the execution should go to error handling.
>> Additionally, to avoid memory leak the allocated memory for ttccs should
>> be released, too. So, goto error handling to release the memory and
>> return.
>>
>> Fixes: e932900a3279 ("arm: zynq: Use standard timer binding")
>> Signed-off-by: Navid Emamdoost <navid.emamdoost@...il.com>
>> ---
>>  drivers/clocksource/timer-cadence-ttc.c | 20 +++++++++++---------
>>  1 file changed, 11 insertions(+), 9 deletions(-)
>>
>> diff --git a/drivers/clocksource/timer-cadence-ttc.c b/drivers/clocksource/timer-cadence-ttc.c
>> index 88fe2e9ba9a3..035e16bc17d3 100644
>> --- a/drivers/clocksource/timer-cadence-ttc.c
>> +++ b/drivers/clocksource/timer-cadence-ttc.c
>> @@ -328,10 +328,8 @@ static int __init ttc_setup_clocksource(struct clk *clk, void __iomem *base,
>>         ttccs->ttc.clk = clk;
>>
>>         err = clk_prepare_enable(ttccs->ttc.clk);
>> -       if (err) {
>> -               kfree(ttccs);
>> -               return err;
>> -       }
>> +       if (err)
>> +               goto release_ttccs;
>>
>>         ttccs->ttc.freq = clk_get_rate(ttccs->ttc.clk);
>>
>> @@ -341,8 +339,10 @@ static int __init ttc_setup_clocksource(struct clk *clk, void __iomem *base,
>>
>>         err = clk_notifier_register(ttccs->ttc.clk,
>>                                     &ttccs->ttc.clk_rate_change_nb);
>> -       if (err)
>> +       if (err) {
>>                 pr_warn("Unable to register clock notifier.\n");
>> +               goto release_ttccs;
>> +       }
>>
>>         ttccs->ttc.base_addr = base;
>>         ttccs->cs.name = "ttc_clocksource";
>> @@ -363,16 +363,18 @@ static int __init ttc_setup_clocksource(struct clk *clk, void __iomem *base,
>>                      ttccs->ttc.base_addr + TTC_CNT_CNTRL_OFFSET);
>>
>>         err = clocksource_register_hz(&ttccs->cs, ttccs->ttc.freq / PRESCALE);
>> -       if (err) {
>> -               kfree(ttccs);
>> -               return err;
>> -       }
>> +       if (err)
>> +               goto release_ttccs;
>>
>>         ttc_sched_clock_val_reg = base + TTC_COUNT_VAL_OFFSET;
>>         sched_clock_register(ttc_sched_clock_read, timer_width,
>>                              ttccs->ttc.freq / PRESCALE);
>>
>>         return 0;
>> +
>> +release_ttccs:
>> +       kfree(ttccs);
>> +       return err;
>>  }
>>
>>  static int ttc_rate_change_clockevent_cb(struct notifier_block *nb,
>> --
>> 2.17.1
>>
> 
> 


-- 
 <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ