linux-kernel - [PATCH v4 2/2] pwm: mtk_disp: keep the trigger register after pwm setting.

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20191217040237.28238-3-jitao.shi@mediatek.com>
Date:   Tue, 17 Dec 2019 12:02:37 +0800
From:   Jitao Shi <jitao.shi@...iatek.com>
To:     Thierry Reding <thierry.reding@...il.com>,
        Uwe Kleine-Koenig <u.kleine-koenig@...gutronix.de>,
        Matthias Brugger <matthias.bgg@...il.com>,
        <linux-pwm@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>, CK Hu <ck.hu@...iatek.com>
CC:     <linux-mediatek@...ts.infradead.org>, <sj.huang@...iatek.com>,
        Jitao Shi <jitao.shi@...iatek.com>
Subject: [PATCH v4 2/2] pwm: mtk_disp: keep the trigger register after pwm setting.

Move the trigger after pwm setting to avoid the pwm wrong signal
output.

Remove the regist enable trigger setting in probe.
Move the trigger to end of mtk_disp_pwm_config().

Signed-off-by: Jitao Shi <jitao.shi@...iatek.com>
---
 drivers/pwm/pwm-mtk-disp.c | 20 +++++++-------------
 1 file changed, 7 insertions(+), 13 deletions(-)

diff --git a/drivers/pwm/pwm-mtk-disp.c b/drivers/pwm/pwm-mtk-disp.c
index c7b14acc9316..c1aae5b5693b 100644
--- a/drivers/pwm/pwm-mtk-disp.c
+++ b/drivers/pwm/pwm-mtk-disp.c
@@ -122,6 +122,13 @@ static int mtk_disp_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 		mtk_disp_pwm_update_bits(mdp, mdp->data->commit,
 					 mdp->data->commit_mask,
 					 0x0);
+	} else {
+		mtk_disp_pwm_update_bits(mdp, mdp->data->bls_debug,
+					 mdp->data->bls_debug_mask,
+					 mdp->data->bls_debug_mask);
+		mtk_disp_pwm_update_bits(mdp, mdp->data->con0,
+					 mdp->data->con0_sel,
+					 mdp->data->con0_sel);
 	}
 
 	clk_disable_unprepare(mdp->clk_mm);
@@ -207,19 +214,6 @@ static int mtk_disp_pwm_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, mdp);
 
-	/*
-	 * For MT2701, disable double buffer before writing register
-	 * and select manual mode and use PWM_PERIOD/PWM_HIGH_WIDTH.
-	 */
-	if (!mdp->data->has_commit) {
-		mtk_disp_pwm_update_bits(mdp, mdp->data->bls_debug,
-					 mdp->data->bls_debug_mask,
-					 mdp->data->bls_debug_mask);
-		mtk_disp_pwm_update_bits(mdp, mdp->data->con0,
-					 mdp->data->con0_sel,
-					 mdp->data->con0_sel);
-	}
-
 	return 0;
 }
 
-- 
2.21.0