| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20191218181352.GA6385@bogus>
Date: Wed, 18 Dec 2019 12:13:52 -0600
From: Rob Herring <robh@...nel.org>
To: Kieran Bingham <kieran.bingham+renesas@...asonboard.com>
Cc: linux-renesas-soc@...r.kernel.org, linux-media@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Kieran Bingham <kieran.bingham@...asonboard.com>,
Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Jacopo Mondi <jacopo@...ndi.org>,
Niklas Söderlund
<niklas.soderlund@...natech.se>,
Mark Rutland <mark.rutland@....com>, sakari.ailus@....fi,
Hans Verkuil <hverkuil@...all.nl>,
Laurent Pinchart <laurent.pinchart+renesas@...asonboard.com>,
Jacopo Mondi <jacopo+renesas@...ndi.org>,
Niklas Söderlund
<niklas.soderlund+renesas@...natech.se>
Subject: Re: [PATCH v6 1/2] dt-bindings: media: i2c: Add bindings for Maxim
Integrated MAX9286
On Wed, Dec 11, 2019 at 12:44:58PM +0000, Kieran Bingham wrote:
> From: Laurent Pinchart <laurent.pinchart+renesas@...asonboard.com>
>
> The MAX9286 deserializes video data received on up to 4 Gigabit
> Multimedia Serial Links (GMSL) and outputs them on a CSI-2 port using up
> to 4 data lanes.
>
> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@...asonboard.com>
> Signed-off-by: Jacopo Mondi <jacopo+renesas@...ndi.org>
> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@...asonboard.com>
> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@...natech.se>
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@...natech.se>
> ---
> .../bindings/media/i2c/maxim,max9286.yaml | 289 ++++++++++++++++++
> 1 file changed, 289 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
A couple of nits, with those fixed:
Reviewed-by: Rob Herring <robh@...nel.org>
>
> diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
> new file mode 100644
> index 000000000000..d37ea2c432f6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
> @@ -0,0 +1,289 @@
> +# SPDX-License-Identifier: GPL-2.0-only
Dual license new bindings please:
(GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (C) 2019 Renesas Electronics Corp.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/i2c/maxim,max9286.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Maxim Integrated Quad GMSL Deserializer
> +
> +maintainers:
> + - Jacopo Mondi <jacopo+renesas@...ndi.org>
> + - Kieran Bingham <kieran.bingham+renesas@...asonboard.com>
> + - Laurent Pinchart <laurent.pinchart+renesas@...asonboard.com>
> + - Niklas Söderlund <niklas.soderlund+renesas@...natech.se>
> +
> +description: -|
I usually see '|-', but I guess that works.
> + The MAX9286 deserializer receives video data on up to 4 Gigabit Multimedia
> + Serial Links (GMSL) and outputs them on a CSI-2 D-PHY port using up to 4 data
> + lanes.
> +
> + In addition to video data, the GMSL links carry a bidirectional control
> + channel that encapsulates I2C messages. The MAX9286 forwards all I2C traffic
> + not addressed to itself to the other side of the links, where a GMSL
> + serializer will output it on a local I2C bus. In the other direction all I2C
> + traffic received over GMSL by the MAX9286 is output on the local I2C bus.
> +
> +properties:
> + '#address-cells':
> + const: 1
> +
> + '#size-cells':
> + const: 0
> +
> + compatible:
> + const: maxim,max9286
> +
> + reg:
> + description: I2C device address
> + maxItems: 1
> +
> + poc-supply:
> + description: Regulator providing Power over Coax to the cameras
> + maxItems: 1
> +
> + enable-gpios:
> + description: GPIO connected to the \#PWDN pin with inverted polarity
> + maxItems: 1
> +
> + ports:
> + type: object
> + description: -|
> + The connections to the MAX9286 GMSL and its endpoint nodes are modelled
> + using the OF graph bindings in accordance with the video interface
> + bindings defined in
> + Documentation/devicetree/bindings/media/video-interfaces.txt.
> +
> + The following table lists the port number corresponding to each device
> + port.
> +
> + Port Description
> + ----------------------------------------
> + Port 0 GMSL Input 0
> + Port 1 GMSL Input 1
> + Port 2 GMSL Input 2
> + Port 3 GMSL Input 3
> + Port 4 CSI-2 Output
> +
> + properties:
> + '#address-cells':
> + const: 1
> +
> + '#size-cells':
> + const: 0
> +
> + port@[0-3]:
> + type: object
> + properties:
> + reg:
> + enum: [ 0, 1, 2, 3 ]
> +
> + endpoint:
> + type: object
> +
> + properties:
> + remote-endpoint:
> + description: -|
> + phandle to the remote GMSL source endpoint subnode in the
> + remote node port.
> + maxItems: 1
This is not an array. You can just drop and assume it has a type defined
elsewhere.
> +
> + required:
> + - remote-endpoint
> +
> + required:
> + - reg
> + - endpoint
> +
> + additionalProperties: false
> +
> + port@4:
> + type: object
> + properties:
> + reg:
> + const: 4
> +
> + endpoint:
> + type: object
> +
> + properties:
> + remote-endpoint:
> + description: phandle to the remote CSI-2 sink endpoint.
> + maxItems: 1
And here.
> +
> + data-lanes:
> + description: array of physical CSI-2 data lane indexes.
> +
> + required:
> + - remote-endpoint
> + - data-lanes
> +
> + required:
> + - reg
> + - endpoint
> +
> + additionalProperties: false
> +
> + required:
> + - port@4
> +
> + i2c-mux:
> + type: object
> + description: -|
> + Each GMSL link is modelled as a child bus of an i2c bus
> + multiplexer/switch, in accordance with bindings described in
> + Documentation/devicetree/bindings/i2c/i2c-mux.txt. The serializer
> + device on the remote end of the GMSL link shall be modelled as a child
> + node of the corresponding I2C bus.
> +
> + properties:
> + '#address-cells':
> + const: 1
> +
> + '#size-cells':
> + const: 0
> +
> + additionalProperties: false
> +
> +required:
> + - compatible
> + - reg
> + - ports
> + - i2c-mux
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> +
> + i2c@...d8000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + reg = <0 0xe66d8000 0 0x40>;
> +
> + gmsl-deserializer@2c {
> + compatible = "maxim,max9286";
> + reg = <0x2c>;
> + poc-supply = <&camera_poc_12v>;
> + enable-gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> +
> + max9286_in0: endpoint {
> + remote-endpoint = <&rdacm20_out0>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> +
> + max9286_in1: endpoint {
> + remote-endpoint = <&rdacm20_out1>;
> + };
> + };
> +
> + port@2 {
> + reg = <2>;
> +
> + max9286_in2: endpoint {
> + remote-endpoint = <&rdacm20_out2>;
> + };
> + };
> +
> + port@3 {
> + reg = <3>;
> +
> + max9286_in3: endpoint {
> + remote-endpoint = <&rdacm20_out3>;
> + };
> + };
> +
> + port@4 {
> + reg = <4>;
> +
> + max9286_out: endpoint {
> + data-lanes = <1 2 3 4>;
> + remote-endpoint = <&csi40_in>;
> + };
> + };
> + };
> +
> + i2c-mux {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + i2c@0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + reg = <0>;
> +
> + camera@51 {
> + reg = <0x51>;
> +
> + port {
> + rdacm20_out0: endpoint {
> + remote-endpoint = <&max9286_in0>;
> + };
> + };
> +
> + };
> + };
> +
> + i2c@1 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <1>;
> +
> + camera@52 {
> + reg = <0x52>;
> +
> + port {
> + rdacm20_out1: endpoint {
> + remote-endpoint = <&max9286_in1>;
> + };
> + };
> + };
> + };
> +
> + i2c@2 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <2>;
> +
> + camera@53 {
> + reg = <0x53>;
> +
> + port {
> + rdacm20_out2: endpoint {
> + remote-endpoint = <&max9286_in2>;
> + };
> + };
> + };
> + };
> +
> + i2c@3 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <3>;
> +
> + camera@54 {
> + reg = <0x54>;
> +
> + port {
> + rdacm20_out3: endpoint {
> + remote-endpoint = <&max9286_in3>;
> + };
> + };
> + };
> + };
> + };
> + };
> + };
> --
> 2.20.1
>
Powered by blists - more mailing lists