| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20191218143416.v3.7.I1fc75ad11db9048ef08cfe1ab7322753d9a219c7@changeid>
Date: Wed, 18 Dec 2019 14:35:28 -0800
From: Douglas Anderson <dianders@...omium.org>
To: Andrzej Hajda <a.hajda@...sung.com>,
Neil Armstrong <narmstrong@...libre.com>
Cc: robdclark@...omium.org, linux-arm-msm@...r.kernel.org,
bjorn.andersson@...aro.org, seanpaul@...omium.org,
Jeffrey Hugo <jeffrey.l.hugo@...il.com>,
Daniel Vetter <daniel@...ll.ch>,
Douglas Anderson <dianders@...omium.org>,
Rob Clark <robdclark@...il.com>,
Jonas Karlman <jonas@...boo.se>, linux-kernel@...r.kernel.org,
dri-devel@...ts.freedesktop.org, David Airlie <airlied@...ux.ie>,
Jernej Skrabec <jernej.skrabec@...l.net>,
Laurent Pinchart <Laurent.pinchart@...asonboard.com>
Subject: [PATCH v3 7/9] drm/bridge: ti-sn65dsi86: Group DP link training bits in a function
We'll re-organize the ti_sn_bridge_enable() function a bit to group
together all the parts relating to link training and split them into a
sub-function. This is not intended to have any functional change and
is in preparation for trying link training several times at different
rates. One small side effect here is that if link training fails
we'll now leave the DP PLL disabled, but that seems like a sane thing
to do.
Signed-off-by: Douglas Anderson <dianders@...omium.org>
Tested-by: Rob Clark <robdclark@...il.com>
Reviewed-by: Rob Clark <robdclark@...il.com>
---
Changes in v3: None
Changes in v2: None
drivers/gpu/drm/bridge/ti-sn65dsi86.c | 86 ++++++++++++++++-----------
1 file changed, 52 insertions(+), 34 deletions(-)
diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
index d5990a0947b9..48fb4dc72e1c 100644
--- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c
+++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
@@ -530,6 +530,46 @@ static unsigned int ti_sn_get_max_lanes(struct ti_sn_bridge *pdata)
return data & DP_LANE_COUNT_MASK;
}
+static int ti_sn_link_training(struct ti_sn_bridge *pdata)
+{
+ unsigned int val;
+ int ret;
+
+ /* set dp clk frequency value */
+ ti_sn_bridge_set_dp_rate(pdata);
+
+ /* enable DP PLL */
+ regmap_write(pdata->regmap, SN_PLL_ENABLE_REG, 1);
+
+ ret = regmap_read_poll_timeout(pdata->regmap, SN_DPPLL_SRC_REG, val,
+ val & DPPLL_SRC_DP_PLL_LOCK, 1000,
+ 50 * 1000);
+ if (ret) {
+ DRM_ERROR("DP_PLL_LOCK polling failed (%d)\n", ret);
+ goto exit;
+ }
+
+ /* Semi auto link training mode */
+ regmap_write(pdata->regmap, SN_ML_TX_MODE_REG, 0x0A);
+ ret = regmap_read_poll_timeout(pdata->regmap, SN_ML_TX_MODE_REG, val,
+ val == ML_TX_MAIN_LINK_OFF ||
+ val == ML_TX_NORMAL_MODE, 1000,
+ 500 * 1000);
+ if (ret) {
+ DRM_ERROR("Training complete polling failed (%d)\n", ret);
+ } else if (val == ML_TX_MAIN_LINK_OFF) {
+ DRM_ERROR("Link training failed, link is off\n");
+ ret = -EIO;
+ }
+
+exit:
+ /* Disable the PLL if we failed */
+ if (ret)
+ regmap_write(pdata->regmap, SN_PLL_ENABLE_REG, 0);
+
+ return ret;
+}
+
static void ti_sn_bridge_enable(struct drm_bridge *bridge)
{
struct ti_sn_bridge *pdata = bridge_to_ti_sn_bridge(bridge);
@@ -555,29 +595,8 @@ static void ti_sn_bridge_enable(struct drm_bridge *bridge)
regmap_update_bits(pdata->regmap, SN_DSI_LANES_REG,
CHA_DSI_LANES_MASK, val);
- /* Set the DP output format (18 bpp or 24 bpp) */
- val = (ti_sn_bridge_get_bpp(pdata) == 18) ? BPP_18_RGB : 0;
- regmap_update_bits(pdata->regmap, SN_DATA_FORMAT_REG, BPP_18_RGB, val);
-
- /* DP lane config */
- val = DP_NUM_LANES(min(pdata->dp_lanes, 3));
- regmap_update_bits(pdata->regmap, SN_SSC_CONFIG_REG, DP_NUM_LANES_MASK,
- val);
-
- /* set dsi/dp clk frequency value */
+ /* set dsi clk frequency value */
ti_sn_bridge_set_dsi_rate(pdata);
- ti_sn_bridge_set_dp_rate(pdata);
-
- /* enable DP PLL */
- regmap_write(pdata->regmap, SN_PLL_ENABLE_REG, 1);
-
- ret = regmap_read_poll_timeout(pdata->regmap, SN_DPPLL_SRC_REG, val,
- val & DPPLL_SRC_DP_PLL_LOCK, 1000,
- 50 * 1000);
- if (ret) {
- DRM_ERROR("DP_PLL_LOCK polling failed (%d)\n", ret);
- return;
- }
/**
* The SN65DSI86 only supports ASSR Display Authentication method and
@@ -588,19 +607,18 @@ static void ti_sn_bridge_enable(struct drm_bridge *bridge)
drm_dp_dpcd_writeb(&pdata->aux, DP_EDP_CONFIGURATION_SET,
DP_ALTERNATE_SCRAMBLER_RESET_ENABLE);
- /* Semi auto link training mode */
- regmap_write(pdata->regmap, SN_ML_TX_MODE_REG, 0x0A);
- ret = regmap_read_poll_timeout(pdata->regmap, SN_ML_TX_MODE_REG, val,
- val == ML_TX_MAIN_LINK_OFF ||
- val == ML_TX_NORMAL_MODE, 1000,
- 500 * 1000);
- if (ret) {
- DRM_ERROR("Training complete polling failed (%d)\n", ret);
- return;
- } else if (val == ML_TX_MAIN_LINK_OFF) {
- DRM_ERROR("Link training failed, link is off\n");
+ /* Set the DP output format (18 bpp or 24 bpp) */
+ val = (ti_sn_bridge_get_bpp(pdata) == 18) ? BPP_18_RGB : 0;
+ regmap_update_bits(pdata->regmap, SN_DATA_FORMAT_REG, BPP_18_RGB, val);
+
+ /* DP lane config */
+ val = DP_NUM_LANES(min(pdata->dp_lanes, 3));
+ regmap_update_bits(pdata->regmap, SN_SSC_CONFIG_REG, DP_NUM_LANES_MASK,
+ val);
+
+ ret = ti_sn_link_training(pdata);
+ if (ret)
return;
- }
/* config video parameters */
ti_sn_bridge_set_video_timings(pdata);
--
2.24.1.735.g03f4e72817-goog
Powered by blists - more mailing lists