linux-kernel - Re: [PATCH v7 6/7] arm64: dts: allwinner: h6: Add thermal sensor and thermal zones

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CA+E=qVdKwkUSsG9WA_4x5QntaOxQqfH1eZQ7TEeUrM_3W5mqTg@mail.gmail.com>
Date:   Wed, 18 Dec 2019 15:18:51 -0800
From:   Vasily Khoruzhick <anarsoul@...il.com>
To:     Chen-Yu Tsai <wens@...e.org>
Cc:     Yangtao Li <tiny.windzz@...il.com>,
        Zhang Rui <rui.zhang@...el.com>,
        Daniel Lezcano <daniel.lezcano@...aro.org>,
        Amit Kucheria <amit.kucheria@...durent.com>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Maxime Ripard <mripard@...nel.org>,
        Mauro Carvalho Chehab <mchehab+samsung@...nel.org>,
        "David S. Miller" <davem@...emloft.net>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        "open list:THERMAL" <linux-pm@...r.kernel.org>,
        devicetree <devicetree@...r.kernel.org>,
        linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
        Ondřej Jirman <megous@...ous.com>,
        linux-kernel <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v7 6/7] arm64: dts: allwinner: h6: Add thermal sensor and
 thermal zones

On Tue, Dec 17, 2019 at 8:32 PM Chen-Yu Tsai <wens@...e.org> wrote:
>
> On Wed, Dec 18, 2019 at 12:22 PM Vasily Khoruzhick <anarsoul@...il.com> wrote:
> >
> > From: Ondrej Jirman <megous@...ous.com>
> >
> > There are two sensors, one for CPU, one for GPU.
> >
> > Signed-off-by: Ondrej Jirman <megous@...ous.com>
> > Signed-off-by: Vasily Khoruzhick <anarsoul@...il.com>
> > ---
> >  arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 33 ++++++++++++++++++++
> >  1 file changed, 33 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> > index 29824081b43b..cdcb1a36301a 100644
> > --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> > @@ -11,6 +11,7 @@
> >  #include <dt-bindings/reset/sun50i-h6-ccu.h>
> >  #include <dt-bindings/reset/sun50i-h6-r-ccu.h>
> >  #include <dt-bindings/reset/sun8i-de2.h>
> > +#include <dt-bindings/thermal/thermal.h>
> >
> >  / {
> >         interrupt-parent = <&gic>;
> > @@ -233,6 +234,12 @@ dma: dma-controller@...2000 {
> >                 sid: efuse@...6000 {
> >                         compatible = "allwinner,sun50i-h6-sid";
> >                         reg = <0x03006000 0x400>;
> > +                       #address-cells = <1>;
> > +                       #size-cells = <1>;
> > +
> > +                       ths_calibration: thermal-sensor-calibration@14 {
> > +                               reg = <0x14 0x6>;
>
> Nit: my preference is to use words as the smallest increment, so this
> would have a size of 8 instead of 6. Same goes for the A64 dts.
>
> AFAICT this doesn't impact the driver in any way.

H6 has only 2 sensors, so it should be 4. That's my overlook, I'll
change it to 4 for H6 and to 8 for A64.

>
> ChenYu
>
>
> > +                       };
> >                 };
> >
> >                 watchdog: watchdog@...90a0 {
> > @@ -856,5 +863,31 @@ r_i2c: i2c@...1400 {
> >                         #address-cells = <1>;
> >                         #size-cells = <0>;
> >                 };
> > +
> > +               ths: thermal-sensor@...0400 {
> > +                       compatible = "allwinner,sun50i-h6-ths";
> > +                       reg = <0x05070400 0x100>;
> > +                       interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
> > +                       clocks = <&ccu CLK_BUS_THS>;
> > +                       clock-names = "bus";
> > +                       resets = <&ccu RST_BUS_THS>;
> > +                       nvmem-cells = <&ths_calibration>;
> > +                       nvmem-cell-names = "calibration";
> > +                       #thermal-sensor-cells = <1>;
> > +               };
> > +       };
> > +
> > +       thermal-zones {
> > +               cpu-thermal {
> > +                       polling-delay-passive = <0>;
> > +                       polling-delay = <0>;
> > +                       thermal-sensors = <&ths 0>;
> > +               };
> > +
> > +               gpu-thermal {
> > +                       polling-delay-passive = <0>;
> > +                       polling-delay = <0>;
> > +                       thermal-sensors = <&ths 1>;
> > +               };
> >         };
> >  };
> > --
> > 2.24.1
> >