[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20191218042121.1471954-8-anarsoul@gmail.com>
Date: Tue, 17 Dec 2019 20:21:21 -0800
From: Vasily Khoruzhick <anarsoul@...il.com>
To: Yangtao Li <tiny.windzz@...il.com>,
Zhang Rui <rui.zhang@...el.com>,
Daniel Lezcano <daniel.lezcano@...aro.org>,
Amit Kucheria <amit.kucheria@...durent.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Maxime Ripard <mripard@...nel.org>,
Chen-Yu Tsai <wens@...e.org>,
Mauro Carvalho Chehab <mchehab+samsung@...nel.org>,
"David S. Miller" <davem@...emloft.net>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
linux-pm@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
Ondřej Jirman <megous@...ous.com>,
linux-kernel@...r.kernel.org
Cc: Vasily Khoruzhick <anarsoul@...il.com>
Subject: [PATCH v7 7/7] arm64: dts: allwinner: a64: Add thermal sensors and thermal zones
A64 has 3 thermal sensors: 1 for CPU, 2 for GPU.
Signed-off-by: Vasily Khoruzhick <anarsoul@...il.com>
---
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 42 +++++++++++++++++++
1 file changed, 42 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 27e48234f1c2..e6556c6d7777 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -49,6 +49,7 @@
#include <dt-bindings/reset/sun50i-a64-ccu.h>
#include <dt-bindings/reset/sun8i-de2.h>
#include <dt-bindings/reset/sun8i-r-ccu.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
interrupt-parent = <&gic>;
@@ -211,6 +212,29 @@ timer {
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
+ thermal-zones {
+ cpu_thermal: cpu0-thermal {
+ /* milliseconds */
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&ths 0>;
+ };
+
+ gpu0_thermal: gpu0-thermal {
+ /* milliseconds */
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&ths 1>;
+ };
+
+ gpu1_thermal: gpu1-thermal {
+ /* milliseconds */
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&ths 2>;
+ };
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <1>;
@@ -485,6 +509,12 @@ mmc2: mmc@...1000 {
sid: eeprom@...4000 {
compatible = "allwinner,sun50i-a64-sid";
reg = <0x1c14000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ths_calibration: thermal-sensor-calibration@34 {
+ reg = <0x34 0x6>;
+ };
};
crypto: crypto@...5000 {
@@ -810,6 +840,18 @@ codec: codec@...2e00 {
status = "disabled";
};
+ ths: thermal-sensor@...5000 {
+ compatible = "allwinner,sun50i-a64-ths";
+ reg = <0x01c25000 0x100>;
+ clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
+ clock-names = "bus", "mod";
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&ccu RST_BUS_THS>;
+ nvmem-cells = <&ths_calibration>;
+ nvmem-cell-names = "calibration";
+ #thermal-sensor-cells = <1>;
+ };
+
uart0: serial@...8000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
--
2.24.1
Powered by blists - more mailing lists