lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <87b2b266-e4a9-9a7a-2336-6ec57d7c4d1d@gmail.com>
Date:   Wed, 18 Dec 2019 11:30:14 +0300
From:   Dmitry Osipenko <digetx@...il.com>
To:     Sowjanya Komatineni <skomatineni@...dia.com>,
        thierry.reding@...il.com, jonathanh@...dia.com,
        mperttunen@...dia.com, gregkh@...uxfoundation.org,
        sboyd@...nel.org, robh+dt@...nel.org, mark.rutland@....com
Cc:     pdeschrijver@...dia.com, pgaikwad@...dia.com, spujar@...dia.com,
        josephl@...dia.com, daniel.lezcano@...aro.org,
        mmaddireddy@...dia.com, markz@...dia.com,
        devicetree@...r.kernel.org, linux-clk@...r.kernel.org,
        linux-tegra@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v4 06/19] soc: tegra: Add Tegra PMC clock registrations
 into PMC driver

17.12.2019 23:03, Sowjanya Komatineni пишет:
> Tegra PMC has clk_out_1, clk_out_2, and clk_out_3 clocks and currently
> these PMC clocks are registered by Tegra clock driver with each clock as
> separate mux and gate clocks using clk_register_mux and clk_register_gate
> by passing PMC base address and register offsets and PMC programming for
> these clocks happens through direct PMC access by the clock driver.
> 
> With this, when PMC is in secure mode any direct PMC access from the
> non-secure world does not go through and these clocks will not be
> functional.
> 
> This patch adds these PMC clocks registration to pmc driver with PMC as
> a clock provider and registers each clock as single clock.
> 
> clk_ops callback implementations for these clocks uses tegra_pmc_readl and
> tegra_pmc_writel which supports PMC programming in both secure mode and
> non-secure mode.
> 
> Signed-off-by: Sowjanya Komatineni <skomatineni@...dia.com>
> ---
>  drivers/soc/tegra/pmc.c | 248 ++++++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 248 insertions(+)
> 
> diff --git a/drivers/soc/tegra/pmc.c b/drivers/soc/tegra/pmc.c
> index ea0e11a09c12..6d65194a6e71 100644
> --- a/drivers/soc/tegra/pmc.c
> +++ b/drivers/soc/tegra/pmc.c
> @@ -13,6 +13,9 @@
>  
>  #include <linux/arm-smccc.h>
>  #include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/clkdev.h>
> +#include <linux/clk/clk-conf.h>
>  #include <linux/clk/tegra.h>
>  #include <linux/debugfs.h>
>  #include <linux/delay.h>
> @@ -48,6 +51,7 @@
>  #include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h>
>  #include <dt-bindings/gpio/tegra186-gpio.h>
>  #include <dt-bindings/gpio/tegra194-gpio.h>
> +#include <dt-bindings/soc/tegra-pmc.h>
>  
>  #define PMC_CNTRL			0x0
>  #define  PMC_CNTRL_INTR_POLARITY	BIT(17) /* inverts INTR polarity */
> @@ -100,6 +104,7 @@
>  #define PMC_WAKE2_STATUS		0x168
>  #define PMC_SW_WAKE2_STATUS		0x16c
>  
> +#define PMC_CLK_OUT_CNTRL		0x1a8
>  #define PMC_SENSOR_CTRL			0x1b0
>  #define  PMC_SENSOR_CTRL_SCRATCH_WRITE	BIT(2)
>  #define  PMC_SENSOR_CTRL_ENABLE_RST	BIT(1)
> @@ -155,6 +160,64 @@
>  #define  TEGRA_SMC_PMC_READ	0xaa
>  #define  TEGRA_SMC_PMC_WRITE	0xbb
>  
> +struct pmc_clk {
> +	struct clk_hw	hw;
> +	unsigned long	offs;
> +	u32		mux_mask;
> +	u32		mux_shift;
> +	u32		gate_shift;
> +};
> +
> +#define to_pmc_clk(_hw) container_of(_hw, struct pmc_clk, hw)
> +
> +struct pmc_clk_init_data {
> +	char *name;
> +	const char *const *parents;
> +	int num_parents;
> +	int clk_id;
> +	u8 mux_shift;
> +	u8 gate_shift;
> +};
> +
> +static const char * const clk_out1_parents[] = { "osc", "osc_div2",
> +	"osc_div4", "extern1",
> +};
> +
> +static const char * const clk_out2_parents[] = { "osc", "osc_div2",
> +	"osc_div4", "extern2",
> +};
> +
> +static const char * const clk_out3_parents[] = { "osc", "osc_div2",
> +	"osc_div4", "extern3",
> +};
> +
> +static const struct pmc_clk_init_data tegra_pmc_clks_data[] = {
> +	{
> +		.name = "clk_out_1",
> +		.parents = clk_out1_parents,
> +		.num_parents = ARRAY_SIZE(clk_out1_parents),
> +		.clk_id = TEGRA_PMC_CLK_OUT_1,

> +		.mux_shift = 6,
> +		.gate_shift = 2,

I'd replace these with a single .shift, given that mux_shift =
gate_shift + 4 for all clocks.

> +	},
> +	{
> +		.name = "clk_out_2",
> +		.parents = clk_out2_parents,
> +		.num_parents = ARRAY_SIZE(clk_out2_parents),
> +		.clk_id = TEGRA_PMC_CLK_OUT_2,
> +		.mux_shift = 14,
> +		.gate_shift = 10,
> +	},
> +	{
> +		.name = "clk_out_3",
> +		.parents = clk_out3_parents,
> +		.num_parents = ARRAY_SIZE(clk_out3_parents),
> +		.clk_id = TEGRA_PMC_CLK_OUT_3,
> +		.mux_shift = 22,
> +		.gate_shift = 18,
> +	},
> +};
> +
>  struct tegra_powergate {
>  	struct generic_pm_domain genpd;
>  	struct tegra_pmc *pmc;
> @@ -254,6 +317,9 @@ struct tegra_pmc_soc {
>  	 */
>  	const struct tegra_wake_event *wake_events;
>  	unsigned int num_wake_events;
> +
> +	const struct pmc_clk_init_data *pmc_clks_data;
> +	unsigned int num_pmc_clks;
>  };
>  
>  static const char * const tegra186_reset_sources[] = {
> @@ -2163,6 +2229,173 @@ static int tegra_pmc_clk_notify_cb(struct notifier_block *nb,
>  	return NOTIFY_OK;
>  }
>  
> +static void pmc_clk_fence_udelay(u32 offset)
> +{
> +	tegra_pmc_readl(pmc, offset);
> +	/* pmc clk propagation delay 2 us */
> +	udelay(2);
> +}
> +
> +static u8 pmc_clk_mux_get_parent(struct clk_hw *hw)
> +{
> +	struct pmc_clk *clk = to_pmc_clk(hw);
> +	u32 val;
> +
> +	val = tegra_pmc_readl(pmc, clk->offs) >> clk->mux_shift;
> +	val &= clk->mux_mask;
> +
> +	return val;
> +}
> +
> +static int pmc_clk_mux_set_parent(struct clk_hw *hw, u8 index)
> +{
> +	struct pmc_clk *clk = to_pmc_clk(hw);
> +	u32 val;
> +
> +	val = tegra_pmc_readl(pmc, clk->offs);
> +	val &= ~(clk->mux_mask << clk->mux_shift);
> +	val |= index << clk->mux_shift;
> +	tegra_pmc_writel(pmc, val, clk->offs);
> +	pmc_clk_fence_udelay(clk->offs);
> +
> +	return 0;
> +}
> +
> +static int pmc_clk_is_enabled(struct clk_hw *hw)
> +{
> +	struct pmc_clk *clk = to_pmc_clk(hw);
> +
> +	return tegra_pmc_readl(pmc, clk->offs) & BIT(clk->gate_shift) ? 1 : 0;
> +}
> +
> +static void pmc_clk_set_state(unsigned long offs, u32 shift, int state)
> +{
> +	u32 val;
> +
> +	val = tegra_pmc_readl(pmc, offs);
> +	val = state ? (val | BIT(shift)) : (val & ~BIT(shift));
> +	tegra_pmc_writel(pmc, val, offs);
> +	pmc_clk_fence_udelay(offs);
> +}
> +
> +static int pmc_clk_enable(struct clk_hw *hw)
> +{
> +	struct pmc_clk *clk = to_pmc_clk(hw);
> +
> +	pmc_clk_set_state(clk->offs, clk->gate_shift, 1);
> +
> +	return 0;
> +}
> +
> +static void pmc_clk_disable(struct clk_hw *hw)
> +{
> +	struct pmc_clk *clk = to_pmc_clk(hw);
> +
> +	pmc_clk_set_state(clk->offs, clk->gate_shift, 0);
> +}
> +
> +static const struct clk_ops pmc_clk_ops = {
> +	.get_parent = pmc_clk_mux_get_parent,
> +	.set_parent = pmc_clk_mux_set_parent,
> +	.determine_rate = __clk_mux_determine_rate,
> +	.is_enabled = pmc_clk_is_enabled,
> +	.enable = pmc_clk_enable,
> +	.disable = pmc_clk_disable,
> +};
> +
> +static struct clk *
> +tegra_pmc_clk_out_register(const struct pmc_clk_init_data *data,
> +			   unsigned long offset)
> +{
> +	struct clk_init_data init;
> +	struct pmc_clk *pmc_clk;
> +
> +	pmc_clk = kzalloc(sizeof(*pmc_clk), GFP_KERNEL);
> +	if (!pmc_clk)
> +		return ERR_PTR(-ENOMEM);
> +
> +	init.name = data->name;
> +	init.ops = &pmc_clk_ops;
> +	init.parent_names = data->parents;
> +	init.num_parents = data->num_parents;
> +	init.flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT |
> +		     CLK_SET_PARENT_GATE;
> +
> +	pmc_clk->hw.init = &init;
> +	pmc_clk->offs = offset;
> +	pmc_clk->mux_mask = 3;

If mux_mask is a constant value, perhaps will be better to replace the
variable with a literal?

#define PMC_CLK_OUT_MUX_MASK	GENMASK(1, 0)

> +	pmc_clk->mux_shift = data->mux_shift;
> +	pmc_clk->gate_shift = data->gate_shift;
> +
> +	return clk_register(NULL, &pmc_clk->hw);
> +}
> +
> +static void tegra_pmc_clock_register(struct tegra_pmc *pmc,
> +				     struct device_node *np)
> +{
> +	struct clk *clk;
> +	struct clk_onecell_data *clk_data;
> +	unsigned int num_clks;
> +	int i, err = -ENOMEM;
> +
> +	num_clks = pmc->soc->num_pmc_clks;
> +
> +	if (!num_clks)
> +		return;
> +
> +	clk_data = kmalloc(sizeof(*clk_data), GFP_KERNEL);
> +	if (!clk_data)
> +		goto err_clk;

What about devm_kmalloc, devm_kcalloc?

> +	clk_data->clks = kcalloc(TEGRA_PMC_CLK_MAX, sizeof(*clk_data->clks),
> +				 GFP_KERNEL);
> +	if (!clk_data->clks)
> +		goto free_clkdata;
> +
> +	clk_data->clk_num = TEGRA_PMC_CLK_MAX;
> +
> +	for (i = 0; i < TEGRA_PMC_CLK_MAX; i++)
> +		clk_data->clks[i] = ERR_PTR(-ENOENT);
> +
> +	for (i = 0; i < pmc->soc->num_pmc_clks; i++) {
> +		const struct pmc_clk_init_data *data;
> +
> +		data = pmc->soc->pmc_clks_data + i;
> +
> +		clk = tegra_pmc_clk_out_register(data, PMC_CLK_OUT_CNTRL);> +		if (IS_ERR(clk)) {
> +			dev_err(pmc->dev,
> +				"unable to register %s\n", data->name);
> +			err = PTR_ERR(clk);
Error codes in a message could be useful.

		err = PTR_ERR_OR_ZERO(clk);
		if (err)
			dev_err(pmc->dev, "unable to register %s: %d\n",
				data->name, err);

> +			goto free_clks;
> +		}

-		clk_data->clks[data->clk_id] = clk;

> +		err = clk_register_clkdev(clk, data->name, NULL);
> +		if (err) {
> +			dev_err(pmc->dev,
> +				"unable to register %s clock lookup\n",
> +				data->name);

			dev_err(pmc->dev,
				"unable to register %s clock lookup: %d\n",
				data->name, err);

> +			goto free_clks;
> +		}

I'd move the assignment here for a bit more consistency.

+		clk_data->clks[data->clk_id] = clk;

> +	}
> +
> +	err = of_clk_add_provider(np, of_clk_src_onecell_get, clk_data);
> +	if (err) {
> +		dev_err(pmc->dev, "failed to add pmc clk provider\n");
> +		goto free_clks;
> +	}

[snip]

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ