[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <fd800ae946ae6b9aae11b7251cf0f8e26116ab88.1576664155.git.Jose.Abreu@synopsys.com>
Date: Wed, 18 Dec 2019 11:17:37 +0100
From: Jose Abreu <Jose.Abreu@...opsys.com>
To: netdev@...r.kernel.org
Cc: Joao Pinto <Joao.Pinto@...opsys.com>,
Jakub Kicinski <jakub.kicinski@...ronome.com>,
Jose Abreu <Jose.Abreu@...opsys.com>,
Giuseppe Cavallaro <peppe.cavallaro@...com>,
Alexandre Torgue <alexandre.torgue@...com>,
Jose Abreu <Jose.Abreu@...opsys.com>,
"David S. Miller" <davem@...emloft.net>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
linux-stm32@...md-mailman.stormreply.com,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: [PATCH net v3 3/9] net: stmmac: Do not accept invalid MTU values
The maximum MTU value is determined by the maximum size of TX FIFO so
that a full packet can fit in the FIFO. Add a check for this in the MTU
change callback.
Also check if provided and rounded MTU does not passes the maximum limit
of 16K.
Changes from v2:
- Align MTU before checking if its valid
Fixes: 7ac6653a085b ("stmmac: Move the STMicroelectronics driver")
Signed-off-by: Jose Abreu <Jose.Abreu@...opsys.com>
---
Cc: Giuseppe Cavallaro <peppe.cavallaro@...com>
Cc: Alexandre Torgue <alexandre.torgue@...com>
Cc: Jose Abreu <joabreu@...opsys.com>
Cc: "David S. Miller" <davem@...emloft.net>
Cc: Maxime Coquelin <mcoquelin.stm32@...il.com>
Cc: netdev@...r.kernel.org
Cc: linux-stm32@...md-mailman.stormreply.com
Cc: linux-arm-kernel@...ts.infradead.org
Cc: linux-kernel@...r.kernel.org
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index eccbf5daf9ed..8b7861909ef9 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -3827,12 +3827,24 @@ static void stmmac_set_rx_mode(struct net_device *dev)
static int stmmac_change_mtu(struct net_device *dev, int new_mtu)
{
struct stmmac_priv *priv = netdev_priv(dev);
+ int txfifosz = priv->plat->tx_fifo_size;
+
+ if (txfifosz == 0)
+ txfifosz = priv->dma_cap.tx_fifo_size;
+
+ txfifosz /= priv->plat->tx_queues_to_use;
if (netif_running(dev)) {
netdev_err(priv->dev, "must be stopped to change its MTU\n");
return -EBUSY;
}
+ new_mtu = STMMAC_ALIGN(new_mtu);
+
+ /* If condition true, FIFO is too small or MTU too large */
+ if ((txfifosz < new_mtu) || (new_mtu > BUF_SIZE_16KiB))
+ return -EINVAL;
+
dev->mtu = new_mtu;
netdev_update_features(dev);
--
2.7.4
Powered by blists - more mailing lists