linux-kernel - [PATCH 02/10] dt-bindings: iio: adc: at91-sama5d2: add rtc-trigger optional property

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1576686157-11939-3-git-send-email-eugen.hristev@microchip.com>
Date:   Wed, 18 Dec 2019 16:23:58 +0000
From:   <Eugen.Hristev@...rochip.com>
To:     <jic23@...nel.org>, <robh+dt@...nel.org>,
        <alexandre.belloni@...tlin.com>
CC:     <Nicolas.Ferre@...rochip.com>, <linux-iio@...r.kernel.org>,
        <devicetree@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>, <linux-rtc@...r.kernel.org>,
        <a.zummo@...ertech.it>, <Ludovic.Desroches@...rochip.com>,
        <Eugen.Hristev@...rochip.com>
Subject: [PATCH 02/10] dt-bindings: iio: adc: at91-sama5d2: add rtc-trigger
 optional property

From: Eugen Hristev <eugen.hristev@...rochip.com>

Add property to connect RTC-type trigger to the ADC block.
The ADC is connected internally with a line to the RTC block.
The RTC can provide a trigger signal to the ADC to start conversions.

Signed-off-by: Eugen Hristev <eugen.hristev@...rochip.com>
---
 Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt b/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt
index 4a3c1d4..1980f0e 100644
--- a/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt
@@ -23,6 +23,9 @@ Optional properties:
   See ../../dma/dma.txt for details.
   - #io-channel-cells: in case consumer drivers are attached, this must be 1.
   See <Documentation/devicetree/bindings/iio/iio-bindings.txt> for details.
+  - atmel,rtc-trigger: The ADC IP block can be triggered by the RTC block
+inside the SoC. This property is a phandle to a node that provides a
+trigger device, if the ADC block supports it.
 
 Properties for consumer drivers:
   - Consumer drivers can be connected to this producer device, as specified
@@ -44,6 +47,7 @@ adc: adc@...30000 {
 	vddana-supply = <&vdd_3v3_lp_reg>;
 	vref-supply = <&vdd_3v3_lp_reg>;
 	atmel,trigger-edge-type = <IRQ_TYPE_EDGE_BOTH>;
+	atmel,rtc-trigger = <&rtc_adc_trigger>;
 	dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(25))>;
 	dma-names = "rx";
 	#io-channel-cells = <1>;
-- 
2.7.4