linux-kernel - [PATCH 5.4 07/80] PCI/PM: Always return devices to D0 when thawing

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20191219183038.872792429@linuxfoundation.org>
Date:   Thu, 19 Dec 2019 19:33:59 +0100
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org, Dexuan Cui <decui@...rosoft.com>,
        Bjorn Helgaas <bhelgaas@...gle.com>,
        "Rafael J. Wysocki" <rafael.j.wysocki@...el.com>
Subject: [PATCH 5.4 07/80] PCI/PM: Always return devices to D0 when thawing

From: Dexuan Cui <decui@...rosoft.com>

commit f2c33ccacb2d4bbeae2a255a7ca0cbfd03017b7c upstream.

pci_pm_thaw_noirq() is supposed to return the device to D0 and restore its
configuration registers, but previously it only did that for devices whose
drivers implemented the new power management ops.

Hibernation, e.g., via "echo disk > /sys/power/state", involves freezing
devices, creating a hibernation image, thawing devices, writing the image,
and powering off.  The fact that thawing did not return devices with legacy
power management to D0 caused errors, e.g., in this path:

  pci_pm_thaw_noirq
    if (pci_has_legacy_pm_support(pci_dev)) # true for Mellanox VF driver
      return pci_legacy_resume_early(dev)   # ... legacy PM skips the rest
    pci_set_power_state(pci_dev, PCI_D0)
    pci_restore_state(pci_dev)
  pci_pm_thaw
    if (pci_has_legacy_pm_support(pci_dev))
      pci_legacy_resume
	drv->resume
	  mlx4_resume
	    ...
	      pci_enable_msix_range
	        ...
		  if (dev->current_state != PCI_D0)  # <---
		    return -EINVAL;

which caused these warnings:

  mlx4_core a6d1:00:02.0: INTx is not supported in multi-function mode, aborting
  PM: dpm_run_callback(): pci_pm_thaw+0x0/0xd7 returns -95
  PM: Device a6d1:00:02.0 failed to thaw: error -95

Return devices to D0 and restore config registers for all devices, not just
those whose drivers support new power management.

[bhelgaas: also call pci_restore_state() before pci_legacy_resume_early(),
update comment, add stable tag, commit log]
Link: https://lore.kernel.org/r/KU1P153MB016637CAEAD346F0AA8E3801BFAD0@KU1P153MB0166.APCP153.PROD.OUTLOOK.COM
Signed-off-by: Dexuan Cui <decui@...rosoft.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@...gle.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@...el.com>
Cc: stable@...r.kernel.org	# v4.13+
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>

---
 drivers/pci/pci-driver.c |   17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -1076,17 +1076,22 @@ static int pci_pm_thaw_noirq(struct devi
 			return error;
 	}

-	if (pci_has_legacy_pm_support(pci_dev))
-		return pci_legacy_resume_early(dev);
-
 	/*
-	 * pci_restore_state() requires the device to be in D0 (because of MSI
-	 * restoration among other things), so force it into D0 in case the
-	 * driver's "freeze" callbacks put it into a low-power state directly.
+	 * Both the legacy ->resume_early() and the new pm->thaw_noirq()
+	 * callbacks assume the device has been returned to D0 and its
+	 * config state has been restored.
+	 *
+	 * In addition, pci_restore_state() restores MSI-X state in MMIO
+	 * space, which requires the device to be in D0, so return it to D0
+	 * in case the driver's "freeze" callbacks put it into a low-power
+	 * state.
 	 */
 	pci_set_power_state(pci_dev, PCI_D0);
 	pci_restore_state(pci_dev);

+	if (pci_has_legacy_pm_support(pci_dev))
+		return pci_legacy_resume_early(dev);
+
 	if (drv && drv->pm && drv->pm->thaw_noirq)
 		error = drv->pm->thaw_noirq(dev);