[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20191219202052.19039-10-stephan@gerhold.net>
Date: Thu, 19 Dec 2019 21:20:52 +0100
From: Stephan Gerhold <stephan@...hold.net>
To: Linus Walleij <linus.walleij@...aro.org>
Cc: linux-arm-kernel@...ts.infradead.org,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Stephan Gerhold <stephan@...hold.net>
Subject: [PATCH 9/9] ARM: defconfig: u8500: Enable new drivers for samsung-golden
The new device tree for samsung-golden depends on some additional
drivers that are not selected in the u8500 defconfig yet:
- Bluetooth: hci_bcm
- WiFi: brcmfmac
- Touchscreen: atmel_mxt_ts
- Vibrator: gpio-vibra
- Sensors: inv_mpu6050 (IMU)
Signed-off-by: Stephan Gerhold <stephan@...hold.net>
---
arch/arm/configs/u8500_defconfig | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
index 822cddfbf1af..aff87c5ecc43 100644
--- a/arch/arm/configs/u8500_defconfig
+++ b/arch/arm/configs/u8500_defconfig
@@ -30,6 +30,9 @@ CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_NETFILTER=y
CONFIG_PHONET=y
+CONFIG_BT=y
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_BCM=y
CONFIG_CFG80211=y
CONFIG_CFG80211_DEBUGFS=y
CONFIG_MAC80211=y
@@ -42,6 +45,7 @@ CONFIG_BLK_DEV_RAM_SIZE=65536
CONFIG_NETDEVICES=y
CONFIG_SMSC911X=y
CONFIG_SMSC_PHY=y
+CONFIG_BRCMFMAC=m
CONFIG_CW1200=y
CONFIG_CW1200_WLAN_SDIO=y
CONFIG_INPUT_EVDEV=y
@@ -52,9 +56,11 @@ CONFIG_KEYBOARD_STMPE=y
CONFIG_KEYBOARD_TC3589X=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ATMEL_MXT=y
CONFIG_TOUCHSCREEN_BU21013=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_AB8500_PONKEY=y
+CONFIG_INPUT_GPIO_VIBRA=y
CONFIG_RMI4_CORE=y
CONFIG_RMI4_I2C=y
CONFIG_RMI4_F11=y
@@ -62,7 +68,9 @@ CONFIG_RMI4_F11=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_DEV_BUS=y
CONFIG_HW_RANDOM=y
+CONFIG_I2C_MUX=y
CONFIG_SPI=y
CONFIG_SPI_PL022=y
CONFIG_GPIO_STMPE=y
@@ -113,6 +121,7 @@ CONFIG_IIO=y
CONFIG_IIO_SW_TRIGGER=y
CONFIG_IIO_ST_ACCEL_3AXIS=y
CONFIG_IIO_ST_GYRO_3AXIS=y
+CONFIG_INV_MPU6050_I2C=y
CONFIG_BH1780=y
CONFIG_AK8974=y
CONFIG_IIO_ST_MAGN_3AXIS=y
--
2.24.1
Powered by blists - more mailing lists