[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1576788607-13567-4-git-send-email-eajames@linux.ibm.com>
Date: Thu, 19 Dec 2019 14:50:07 -0600
From: Eddie James <eajames@...ux.ibm.com>
To: linux-hwmon@...r.kernel.org
Cc: linux-kernel@...r.kernel.org, linux@...ck-us.net,
jdelvare@...e.com, bjwyman@...il.com,
Eddie James <eajames@...ux.ibm.com>
Subject: [PATCH 3/3] hwmon: (pmbus/ibm-cffps) Fix the LED behavior when turned off
The driver should remain in control of the LED on the PSU, even while
off, not the PSU firmware as previously indicated.
Signed-off-by: Eddie James <eajames@...ux.ibm.com>
---
drivers/hwmon/pmbus/ibm-cffps.c | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/drivers/hwmon/pmbus/ibm-cffps.c b/drivers/hwmon/pmbus/ibm-cffps.c
index b37faf1..1c91ee1 100644
--- a/drivers/hwmon/pmbus/ibm-cffps.c
+++ b/drivers/hwmon/pmbus/ibm-cffps.c
@@ -47,13 +47,9 @@
#define CFFPS_MFR_VAUX_FAULT BIT(6)
#define CFFPS_MFR_CURRENT_SHARE_WARNING BIT(7)
-/*
- * LED off state actually relinquishes LED control to PSU firmware, so it can
- * turn on the LED for faults.
- */
-#define CFFPS_LED_OFF 0
#define CFFPS_LED_BLINK BIT(0)
#define CFFPS_LED_ON BIT(1)
+#define CFFPS_LED_OFF BIT(2)
#define CFFPS_BLINK_RATE_MS 250
enum {
@@ -436,6 +432,9 @@ static void ibm_cffps_create_led_class(struct ibm_cffps *psu)
rc = devm_led_classdev_register(dev, &psu->led);
if (rc)
dev_warn(dev, "failed to register led class: %d\n", rc);
+ else
+ i2c_smbus_write_byte_data(client, CFFPS_SYS_CONFIG_CMD,
+ CFFPS_LED_OFF);
}
static struct pmbus_driver_info ibm_cffps_info[] = {
--
1.8.3.1
Powered by blists - more mailing lists