| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 18 Dec 2019 23:20:31 -0800
From: Bjorn Andersson <bjorn.andersson@...aro.org>
To: pillair@...eaurora.org
Cc: devicetree@...r.kernel.org, linux-arm-msm@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH] arm64: dts: qcom: sc7180: Add WCN3990 WLAN module device
node
On Wed 18 Dec 21:57 PST 2019, pillair@...eaurora.org wrote:
> I will raise the next patchset with the comments addressed.
>
> > -----Original Message-----
> > From: Bjorn Andersson <bjorn.andersson@...aro.org>
> > Sent: Wednesday, December 11, 2019 12:51 PM
> > To: Rakesh Pillai <pillair@...eaurora.org>
> > Cc: devicetree@...r.kernel.org; linux-arm-msm@...r.kernel.org; linux-
> > kernel@...r.kernel.org; linux-arm-kernel@...ts.infradead.org
> > Subject: Re: [PATCH] arm64: dts: qcom: sc7180: Add WCN3990 WLAN module
> > device node
> >
> > On Wed 04 Dec 00:48 PST 2019, Rakesh Pillai wrote:
> >
> > > Add device node for the ath10k SNOC platform driver probe
> > > and add resources required for WCN3990 on sc7180 soc.
> > >
> > > Signed-off-by: Rakesh Pillai <pillair@...eaurora.org>
> > > ---
> > > This change is dependent on the below set of changes
> > > arm64: dts: sc7180: Add qupv3_0 and qupv3_1
> > (https://lore.kernel.org/patchwork/patch/1150367/)
> >
> > Why?
>
> The mentioned series of patchset brings the DTSI for sc7180.
> Hence the addition of wifi node is dependent on this series
> https://lore.kernel.org/patchwork/patch/1150367/
>
I see, this should all be settled now. Looking forward to v2.
Thanks,
Bjorn
>
> >
> > > ---
> > > arch/arm64/boot/dts/qcom/sc7180-idp.dts | 4 ++++
> > > arch/arm64/boot/dts/qcom/sc7180.dtsi | 27
> > +++++++++++++++++++++++++++
> > > 2 files changed, 31 insertions(+)
> > >
> > > diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> > b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> > > index 189254f..8a6a760 100644
> > > --- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> > > +++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> > > @@ -248,6 +248,10 @@
> > > status = "okay";
> > > };
> > >
> > > +&wifi {
> > > + status = "okay";
> >
> > Please conclude on the representation of the "skip-hyp-mem-assign" and
> > add it here, rather than in a subsequent patch - which implies that this
> > patch doesn't work on its own.
>
>
> Sure, I will update the next patchset.
>
>
> >
> > > +};
> > > +
> > > /* PINCTRL - additions to nodes defined in sc7180.dtsi */
> > >
> > > &qup_i2c2_default {
> > > diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> > b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> > > index 666e9b9..40c9971 100644
> > > --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> > > +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> > > @@ -42,6 +42,12 @@
> > > compatible = "qcom,cmd-db";
> > > no-map;
> > > };
> > > +
> > > + wlan_fw_mem: wlan_fw_region@...00000 {
> >
> > wlan_fw_mem: memory@...00000 {
> >
> > > + compatible = "removed-dma-pool";
> > > + no-map;
> > > + reg = <0 0x93900000 0 0x200000>;
> > > + };
> > > };
> > >
> > > cpus {
> > > @@ -1119,6 +1125,27 @@
> > > #clock-cells = <1>;
> > > };
> > > };
> > > +
> > > + wifi: wifi@...00000 {
> > > + status = "disabled";
> > > + compatible = "qcom,wcn3990-wifi";
> > > + reg = <0 0x18800000 0 0x800000>;
> > > + reg-names = "membase";
> > > + interrupts =
> > > + <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH /* CE0
> > */ >,
> > > + <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH /* CE1
> > */ >,
> > > + <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH /* CE2
> > */ >,
> > > + <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH /* CE3
> > */ >,
> > > + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH /* CE4
> > */ >,
> > > + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH /* CE5
> > */ >,
> > > + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH /* CE6
> > */ >,
> > > + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH /* CE7
> > */ >,
> > > + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH /* CE8
> > */ >,
> > > + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH /* CE9
> > */ >,
> > > + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH /* CE10
> > */>,
> > > + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH /* CE11
> > */>;
> > > + memory-region = <&wlan_fw_mem>;
> >
> > No iommus in sc7180?
> >
> > Regards,
> > Bjorn
> >
> > > + };
> > > };
> > >
> > > timer {
> > > --
> > > 2.7.4
> > >
> > >
> > > _______________________________________________
> > > linux-arm-kernel mailing list
> > > linux-arm-kernel@...ts.infradead.org
> > > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Powered by blists - more mailing lists