| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <4907f35240ae77bba4a27fd32f1e586e00cd434d.1576745635.git.matti.vaittinen@fi.rohmeurope.com>
Date: Thu, 19 Dec 2019 11:52:13 +0200
From: Matti Vaittinen <matti.vaittinen@...rohmeurope.com>
To: matti.vaittinen@...rohmeurope.com, mazziesaccount@...il.com
Cc: Jacek Anaszewski <jacek.anaszewski@...il.com>,
Pavel Machek <pavel@....cz>, Dan Murphy <dmurphy@...com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Lee Jones <lee.jones@...aro.org>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Linus Walleij <linus.walleij@...aro.org>,
Bartosz Golaszewski <bgolaszewski@...libre.com>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Alessandro Zummo <a.zummo@...ertech.it>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
linux-leds@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-clk@...r.kernel.org,
linux-gpio@...r.kernel.org, linux-rtc@...r.kernel.org
Subject: [PATCH v7 07/12] clk: bd718x7: Support ROHM BD71828 clk block
BD71828GW is a single-chip power management IC for battery-powered portable
devices. Add support for controlling BD71828 clk using bd718x7 driver.
Signed-off-by: Matti Vaittinen <matti.vaittinen@...rohmeurope.com>
Acked-for-MFD-by: Lee Jones <lee.jones@...aro.org>
---
No changes since v6
drivers/clk/Kconfig | 6 ++---
drivers/clk/clk-bd718x7.c | 38 +++++++++++++++++++++++---------
include/linux/mfd/rohm-bd70528.h | 6 -----
include/linux/mfd/rohm-bd71828.h | 4 ----
include/linux/mfd/rohm-bd718x7.h | 6 -----
5 files changed, 31 insertions(+), 29 deletions(-)
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 45653a0e6ecd..ac5981ce2477 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -305,10 +305,10 @@ config COMMON_CLK_MMP2
Support for Marvell MMP2 and MMP3 SoC clocks
config COMMON_CLK_BD718XX
- tristate "Clock driver for ROHM BD718x7 PMIC"
- depends on MFD_ROHM_BD718XX || MFD_ROHM_BD70528
+ tristate "Clock driver for 32K clk gates on ROHM PMICs"
+ depends on MFD_ROHM_BD718XX || MFD_ROHM_BD70528 || MFD_ROHM_BD71828
help
- This driver supports ROHM BD71837, ROHM BD71847 and
+ This driver supports ROHM BD71837, ROHM BD71847, ROHM BD71828 and
ROHM BD70528 PMICs clock gates.
config COMMON_CLK_FIXED_MMIO
diff --git a/drivers/clk/clk-bd718x7.c b/drivers/clk/clk-bd718x7.c
index 33699ee1bdf3..b52e8d6f660c 100644
--- a/drivers/clk/clk-bd718x7.c
+++ b/drivers/clk/clk-bd718x7.c
@@ -7,12 +7,25 @@
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
-#include <linux/mfd/rohm-bd718x7.h>
-#include <linux/mfd/rohm-bd70528.h>
+#include <linux/mfd/rohm-generic.h>
#include <linux/clk-provider.h>
#include <linux/clkdev.h>
#include <linux/regmap.h>
+/* clk control registers */
+/* BD70528 */
+#define BD70528_REG_OUT32K 0x2c
+/* BD71828 */
+#define BD71828_REG_OUT32K 0x4B
+/* BD71837 and BD71847 */
+#define BD718XX_REG_OUT32K 0x2E
+
+/*
+ * BD71837, BD71847, BD70528 and BD71828 all use bit [0] to clk output control
+ */
+#define CLK_OUT_EN_MASK BIT(0)
+
+
struct bd718xx_clk {
struct clk_hw hw;
u8 reg;
@@ -21,10 +34,8 @@ struct bd718xx_clk {
struct rohm_regmap_dev *mfd;
};
-static int bd71837_clk_set(struct clk_hw *hw, int status)
+static int bd71837_clk_set(struct bd718xx_clk *c, unsigned int status)
{
- struct bd718xx_clk *c = container_of(hw, struct bd718xx_clk, hw);
-
return regmap_update_bits(c->mfd->regmap, c->reg, c->mask, status);
}
@@ -33,14 +44,16 @@ static void bd71837_clk_disable(struct clk_hw *hw)
int rv;
struct bd718xx_clk *c = container_of(hw, struct bd718xx_clk, hw);
- rv = bd71837_clk_set(hw, 0);
+ rv = bd71837_clk_set(c, 0);
if (rv)
dev_dbg(&c->pdev->dev, "Failed to disable 32K clk (%d)\n", rv);
}
static int bd71837_clk_enable(struct clk_hw *hw)
{
- return bd71837_clk_set(hw, 1);
+ struct bd718xx_clk *c = container_of(hw, struct bd718xx_clk, hw);
+
+ return bd71837_clk_set(c, 0xffffffff);
}
static int bd71837_clk_is_enabled(struct clk_hw *hw)
@@ -92,11 +105,15 @@ static int bd71837_clk_probe(struct platform_device *pdev)
case ROHM_CHIP_TYPE_BD71837:
case ROHM_CHIP_TYPE_BD71847:
c->reg = BD718XX_REG_OUT32K;
- c->mask = BD718XX_OUT32K_EN;
+ c->mask = CLK_OUT_EN_MASK;
+ break;
+ case ROHM_CHIP_TYPE_BD71828:
+ c->reg = BD71828_REG_OUT32K;
+ c->mask = CLK_OUT_EN_MASK;
break;
case ROHM_CHIP_TYPE_BD70528:
- c->reg = BD70528_REG_CLK_OUT;
- c->mask = BD70528_CLK_OUT_EN_MASK;
+ c->reg = BD70528_REG_OUT32K;
+ c->mask = CLK_OUT_EN_MASK;
break;
default:
dev_err(&pdev->dev, "Unknown clk chip\n");
@@ -126,6 +143,7 @@ static const struct platform_device_id bd718x7_clk_id[] = {
{ "bd71837-clk", ROHM_CHIP_TYPE_BD71837 },
{ "bd71847-clk", ROHM_CHIP_TYPE_BD71847 },
{ "bd70528-clk", ROHM_CHIP_TYPE_BD70528 },
+ { "bd71828-clk", ROHM_CHIP_TYPE_BD71828 },
{ },
};
MODULE_DEVICE_TABLE(platform, bd718x7_clk_id);
diff --git a/include/linux/mfd/rohm-bd70528.h b/include/linux/mfd/rohm-bd70528.h
index 1013e60c5b25..2ad2320d0a96 100644
--- a/include/linux/mfd/rohm-bd70528.h
+++ b/include/linux/mfd/rohm-bd70528.h
@@ -89,10 +89,6 @@ struct bd70528_data {
#define BD70528_REG_GPIO3_OUT 0x52
#define BD70528_REG_GPIO4_OUT 0x54
-/* clk control */
-
-#define BD70528_REG_CLK_OUT 0x2c
-
/* RTC */
#define BD70528_REG_RTC_COUNT_H 0x2d
@@ -309,8 +305,6 @@ enum {
#define BD70528_GPIO_IN_STATE_BASE 1
-#define BD70528_CLK_OUT_EN_MASK 0x1
-
/* RTC masks to mask out reserved bits */
#define BD70528_MASK_RTC_SEC 0x7f
diff --git a/include/linux/mfd/rohm-bd71828.h b/include/linux/mfd/rohm-bd71828.h
index eb0557eb5314..d013e03f742d 100644
--- a/include/linux/mfd/rohm-bd71828.h
+++ b/include/linux/mfd/rohm-bd71828.h
@@ -183,9 +183,6 @@ enum {
#define BD71828_REG_CHG_STATE 0x65
#define BD71828_REG_CHG_FULL 0xd2
-/* CLK */
-#define BD71828_REG_OUT32K 0x4B
-
/* LEDs */
#define BD71828_REG_LED_CTRL 0x4A
#define BD71828_MASK_LED_AMBER 0x80
@@ -417,7 +414,6 @@ enum {
#define BD71828_INT_RTC1_MASK 0x2
#define BD71828_INT_RTC2_MASK 0x4
-#define BD71828_OUT32K_EN 0x1
#define BD71828_OUT_TYPE_MASK 0x2
#define BD71828_OUT_TYPE_OPEN_DRAIN 0x0
#define BD71828_OUT_TYPE_CMOS 0x2
diff --git a/include/linux/mfd/rohm-bd718x7.h b/include/linux/mfd/rohm-bd718x7.h
index 7f2dbde402a1..bee2474a8f9f 100644
--- a/include/linux/mfd/rohm-bd718x7.h
+++ b/include/linux/mfd/rohm-bd718x7.h
@@ -191,12 +191,6 @@ enum {
#define IRQ_ON_REQ 0x02
#define IRQ_STBY_REQ 0x01
-/* BD718XX_REG_OUT32K bits */
-#define BD718XX_OUT32K_EN 0x01
-
-/* BD7183XX gated clock rate */
-#define BD718XX_CLK_RATE 32768
-
/* ROHM BD718XX irqs */
enum {
BD718XX_INT_STBY_REQ,
--
2.21.0
--
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND
~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]
Powered by blists - more mailing lists