linux-kernel - [PATCH 4.4 129/162] scsi: lpfc: Cap NPIV vports to 256

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20191219183215.626603701@linuxfoundation.org>
Date:   Thu, 19 Dec 2019 19:33:57 +0100
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org, Dick Kennedy <dick.kennedy@...adcom.com>,
        James Smart <jsmart2021@...il.com>,
        "Martin K. Petersen" <martin.petersen@...cle.com>,
        Sasha Levin <sashal@...nel.org>
Subject: [PATCH 4.4 129/162] scsi: lpfc: Cap NPIV vports to 256

From: James Smart <jsmart2021@...il.com>

[ Upstream commit 8b47ae69e049ae0b3373859d901f0334322f9fe9 ]

Depending on the chipset, the number of NPIV vports may vary and be in
excess of what most switches support (256). To avoid confusion with the
users, limit the reported NPIV vports to 256.

Additionally correct the 16G adapter which is reporting a bogus NPIV vport
number if the link is down.

Signed-off-by: Dick Kennedy <dick.kennedy@...adcom.com>
Signed-off-by: James Smart <jsmart2021@...il.com>
Signed-off-by: Martin K. Petersen <martin.petersen@...cle.com>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
 drivers/scsi/lpfc/lpfc.h      |  3 ++-
 drivers/scsi/lpfc/lpfc_attr.c | 12 ++++++++++--
 drivers/scsi/lpfc/lpfc_init.c |  3 +++
 3 files changed, 15 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index ceee9a3fd9e52..a1a9cb952414c 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -867,7 +867,8 @@ struct lpfc_hba {
 	struct list_head port_list;
 	struct lpfc_vport *pport;	/* physical lpfc_vport pointer */
 	uint16_t max_vpi;		/* Maximum virtual nports */
-#define LPFC_MAX_VPI 0xFFFF		/* Max number of VPI supported */
+#define LPFC_MAX_VPI	0xFF		/* Max number VPI supported 0 - 0xff */
+#define LPFC_MAX_VPORTS	0x100		/* Max vports per port, with pport */
 	uint16_t max_vports;            /*
 					 * For IOV HBAs max_vpi can change
 					 * after a reset. max_vports is max
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index f096766150bc9..93092dfba2937 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -1213,6 +1213,9 @@ lpfc_get_hba_info(struct lpfc_hba *phba,
 		max_vpi = (bf_get(lpfc_mbx_rd_conf_vpi_count, rd_config) > 0) ?
 			(bf_get(lpfc_mbx_rd_conf_vpi_count, rd_config) - 1) : 0;
 
+		/* Limit the max we support */
+		if (max_vpi > LPFC_MAX_VPI)
+			max_vpi = LPFC_MAX_VPI;
 		if (mvpi)
 			*mvpi = max_vpi;
 		if (avpi)
@@ -1228,8 +1231,13 @@ lpfc_get_hba_info(struct lpfc_hba *phba,
 			*axri = pmb->un.varRdConfig.avail_xri;
 		if (mvpi)
 			*mvpi = pmb->un.varRdConfig.max_vpi;
-		if (avpi)
-			*avpi = pmb->un.varRdConfig.avail_vpi;
+		if (avpi) {
+			/* avail_vpi is only valid if link is up and ready */
+			if (phba->link_state == LPFC_HBA_READY)
+				*avpi = pmb->un.varRdConfig.avail_vpi;
+			else
+				*avpi = pmb->un.varRdConfig.max_vpi;
+		}
 	}
 
 	mempool_free(pmboxq, phba->mbox_mem_pool);
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 7e06fd6127ccb..1a7ac17534d6b 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -6890,6 +6890,9 @@ lpfc_sli4_read_config(struct lpfc_hba *phba)
 			bf_get(lpfc_mbx_rd_conf_xri_base, rd_config);
 		phba->sli4_hba.max_cfg_param.max_vpi =
 			bf_get(lpfc_mbx_rd_conf_vpi_count, rd_config);
+		/* Limit the max we support */
+		if (phba->sli4_hba.max_cfg_param.max_vpi > LPFC_MAX_VPORTS)
+			phba->sli4_hba.max_cfg_param.max_vpi = LPFC_MAX_VPORTS;
 		phba->sli4_hba.max_cfg_param.vpi_base =
 			bf_get(lpfc_mbx_rd_conf_vpi_base, rd_config);
 		phba->sli4_hba.max_cfg_param.max_rpi =
-- 
2.20.1