Message-ID: <6888670.FVnnZQrD8c@phil>
Date:   Fri, 20 Dec 2019 23:29:24 +0100
From:   Heiko Stuebner <heiko@...ech.de>
To:     dri-devel@...ts.freedesktop.org, sam@...nborg.org
Cc:     thierry.reding@...il.com, robh+dt@...nel.org, mark.rutland@....com,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        christoph.muellner@...obroma-systems.com, maxime@...no.tech
Subject: Re: [PATCH v4 3/3] drm/panel: add panel driver for Xinpeng XPP055C272 panels

Hi Sam,

Am Dienstag, 17. Dezember 2019, 23:29:06 CET schrieb Heiko Stuebner:
> From: Heiko Stuebner <heiko.stuebner@...obroma-systems.com>
> 
> Base on the somewhat similar Rocktech driver but adapted for
> panel-specific init of the XPP055C272.
> 
> changes in v3:
> - remove wrong negative sync flags from display-mode to fix a display
>   artifact of the output getting move a tiny bit to the right
> changes in v2:
> - move to drm-panel-internal backlight handling (Sam)
> - adapt to changes that happened to drm_panel structs+functions (Sam)
> - sort includes (Sam)
> - drop unnecessary DRV_NAME constant (Sam)
> - do mipi_dsi_dcs_exit_sleep_mode and mipi_dsi_dcs_set_display_on
>   in panel prepare (not init_sequence) to keep symmetric (Sam)
> 
> Signed-off-by: Heiko Stuebner <heiko.stuebner@...obroma-systems.com>

are you satisfied with the changes, requested last weekend?

Thanks
Heiko

> ---
>  drivers/gpu/drm/panel/Kconfig                 |  10 +
>  drivers/gpu/drm/panel/Makefile                |   1 +
>  .../gpu/drm/panel/panel-xinpeng-xpp055c272.c  | 400 ++++++++++++++++++
>  3 files changed, 411 insertions(+)
>  create mode 100644 drivers/gpu/drm/panel/panel-xinpeng-xpp055c272.c
> 
> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> index f152bc4eeb53..fb1ded47677e 100644
> --- a/drivers/gpu/drm/panel/Kconfig
> +++ b/drivers/gpu/drm/panel/Kconfig
> @@ -355,4 +355,14 @@ config DRM_PANEL_TRULY_NT35597_WQXGA
>  	help
>  	  Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
>  	  Video Mode panel
> +
> +config DRM_PANEL_XINPENG_XPP055C272
> +	tristate "Xinpeng XPP055C272 panel driver"
> +	depends on OF
> +	depends on DRM_MIPI_DSI
> +	depends on BACKLIGHT_CLASS_DEVICE
> +	help
> +	  Say Y here if you want to enable support for the Xinpeng
> +	  XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI
> +	  system interfaces.
>  endmenu
> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> index b6cd39fe0f20..71d7722146a7 100644
> --- a/drivers/gpu/drm/panel/Makefile
> +++ b/drivers/gpu/drm/panel/Makefile
> @@ -38,3 +38,4 @@ obj-$(CONFIG_DRM_PANEL_TPO_TD028TTEC1) += panel-tpo-td028ttec1.o
>  obj-$(CONFIG_DRM_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o
>  obj-$(CONFIG_DRM_PANEL_TPO_TPG110) += panel-tpo-tpg110.o
>  obj-$(CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA) += panel-truly-nt35597.o
> +obj-$(CONFIG_DRM_PANEL_XINPENG_XPP055C272) += panel-xinpeng-xpp055c272.o
> diff --git a/drivers/gpu/drm/panel/panel-xinpeng-xpp055c272.c b/drivers/gpu/drm/panel/panel-xinpeng-xpp055c272.c
> new file mode 100644
> index 000000000000..1a7ded012344
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-xinpeng-xpp055c272.c
> @@ -0,0 +1,400 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Xinpeng xpp055c272 5.5" MIPI-DSI panel driver
> + * Copyright (C) 2019 Theobroma Systems Design und Consulting GmbH
> + *
> + * based on
> + *
> + * Rockteck jh057n00900 5.5" MIPI-DSI panel driver
> + * Copyright (C) Purism SPC 2019
> + */
> +
> +#include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_modes.h>
> +#include <drm/drm_panel.h>
> +#include <drm/drm_print.h>
> +
> +#include <video/display_timing.h>
> +#include <video/mipi_display.h>
> +
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/media-bus-format.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/regulator/consumer.h>
> +
> +/* Manufacturer specific Commands send via DSI */
> +#define XPP055C272_CMD_ALL_PIXEL_OFF	0x22
> +#define XPP055C272_CMD_ALL_PIXEL_ON	0x23
> +#define XPP055C272_CMD_SETDISP		0xb2
> +#define XPP055C272_CMD_SETRGBIF		0xb3
> +#define XPP055C272_CMD_SETCYC		0xb4
> +#define XPP055C272_CMD_SETBGP		0xb5
> +#define XPP055C272_CMD_SETVCOM		0xb6
> +#define XPP055C272_CMD_SETOTP		0xb7
> +#define XPP055C272_CMD_SETPOWER_EXT	0xb8
> +#define XPP055C272_CMD_SETEXTC		0xb9
> +#define XPP055C272_CMD_SETMIPI		0xbA
> +#define XPP055C272_CMD_SETVDC		0xbc
> +#define XPP055C272_CMD_SETPCR		0xbf
> +#define XPP055C272_CMD_SETSCR		0xc0
> +#define XPP055C272_CMD_SETPOWER		0xc1
> +#define XPP055C272_CMD_SETECO		0xc6
> +#define XPP055C272_CMD_SETPANEL		0xcc
> +#define XPP055C272_CMD_SETGAMMA		0xe0
> +#define XPP055C272_CMD_SETEQ		0xe3
> +#define XPP055C272_CMD_SETGIP1		0xe9
> +#define XPP055C272_CMD_SETGIP2		0xea
> +
> +struct xpp055c272 {
> +	struct device *dev;
> +	struct drm_panel panel;
> +	struct gpio_desc *reset_gpio;
> +	struct regulator *vci;
> +	struct regulator *iovcc;
> +	bool prepared;
> +};
> +
> +static inline struct xpp055c272 *panel_to_xpp055c272(struct drm_panel *panel)
> +{
> +	return container_of(panel, struct xpp055c272, panel);
> +}
> +
> +#define dsi_generic_write_seq(dsi, cmd, seq...) do {			\
> +		static const u8 d[] = { seq };				\
> +		int ret;						\
> +		ret = mipi_dsi_dcs_write(dsi, cmd, d, ARRAY_SIZE(d));	\
> +		if (ret < 0)						\
> +			return ret;					\
> +	} while (0)
> +
> +static int xpp055c272_init_sequence(struct xpp055c272 *ctx)
> +{
> +	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
> +	struct device *dev = ctx->dev;
> +
> +	/*
> +	 * Init sequence was supplied by the panel vendor without much
> +	 * documentation.
> +	 */
> +	dsi_generic_write_seq(dsi, XPP055C272_CMD_SETEXTC, 0xf1, 0x12, 0x83);
> +	dsi_generic_write_seq(dsi, XPP055C272_CMD_SETMIPI,
> +			      0x33, 0x81, 0x05, 0xf9, 0x0e, 0x0e, 0x00, 0x00,
> +			      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x44, 0x25,
> +			      0x00, 0x91, 0x0a, 0x00, 0x00, 0x02, 0x4f, 0x01,
> +			      0x00, 0x00, 0x37);
> +	dsi_generic_write_seq(dsi, XPP055C272_CMD_SETPOWER_EXT, 0x25);
> +	dsi_generic_write_seq(dsi, XPP055C272_CMD_SETPCR, 0x02, 0x11, 0x00);
> +	dsi_generic_write_seq(dsi, XPP055C272_CMD_SETRGBIF,
> +			      0x0c, 0x10, 0x0a, 0x50, 0x03, 0xff, 0x00, 0x00,
> +			      0x00, 0x00);
> +	dsi_generic_write_seq(dsi, XPP055C272_CMD_SETSCR,
> +			      0x73, 0x73, 0x50, 0x50, 0x00, 0x00, 0x08, 0x70,
> +			      0x00);
> +	dsi_generic_write_seq(dsi, XPP055C272_CMD_SETVDC, 0x46);
> +	dsi_generic_write_seq(dsi, XPP055C272_CMD_SETPANEL, 0x0b);
> +	dsi_generic_write_seq(dsi, XPP055C272_CMD_SETCYC, 0x80);
> +	dsi_generic_write_seq(dsi, XPP055C272_CMD_SETDISP, 0xc8, 0x12, 0x30);
> +	dsi_generic_write_seq(dsi, XPP055C272_CMD_SETEQ,
> +			      0x07, 0x07, 0x0B, 0x0B, 0x03, 0x0B, 0x00, 0x00,
> +			      0x00, 0x00, 0xFF, 0x00, 0xC0, 0x10);
> +	dsi_generic_write_seq(dsi, XPP055C272_CMD_SETPOWER,
> +			      0x53, 0x00, 0x1e, 0x1e, 0x77, 0xe1, 0xcc, 0xdd,
> +			      0x67, 0x77, 0x33, 0x33);
> +	dsi_generic_write_seq(dsi, XPP055C272_CMD_SETECO, 0x00, 0x00, 0xff,
> +			      0xff, 0x01, 0xff);
> +	dsi_generic_write_seq(dsi, XPP055C272_CMD_SETBGP, 0x09, 0x09);
> +	msleep(20);
> +
> +	dsi_generic_write_seq(dsi, XPP055C272_CMD_SETVCOM, 0x87, 0x95);
> +	dsi_generic_write_seq(dsi, XPP055C272_CMD_SETGIP1,
> +			      0xc2, 0x10, 0x05, 0x05, 0x10, 0x05, 0xa0, 0x12,
> +			      0x31, 0x23, 0x3f, 0x81, 0x0a, 0xa0, 0x37, 0x18,
> +			      0x00, 0x80, 0x01, 0x00, 0x00, 0x00, 0x00, 0x80,
> +			      0x01, 0x00, 0x00, 0x00, 0x48, 0xf8, 0x86, 0x42,
> +			      0x08, 0x88, 0x88, 0x80, 0x88, 0x88, 0x88, 0x58,
> +			      0xf8, 0x87, 0x53, 0x18, 0x88, 0x88, 0x81, 0x88,
> +			      0x88, 0x88, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00,
> +			      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
> +	dsi_generic_write_seq(dsi, XPP055C272_CMD_SETGIP2,
> +			      0x00, 0x1a, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00,
> +			      0x00, 0x00, 0x00, 0x00, 0x1f, 0x88, 0x81, 0x35,
> +			      0x78, 0x88, 0x88, 0x85, 0x88, 0x88, 0x88, 0x0f,
> +			      0x88, 0x80, 0x24, 0x68, 0x88, 0x88, 0x84, 0x88,
> +			      0x88, 0x88, 0x23, 0x10, 0x00, 0x00, 0x1c, 0x00,
> +			      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> +			      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x05,
> +			      0xa0, 0x00, 0x00, 0x00, 0x00);
> +	dsi_generic_write_seq(dsi, XPP055C272_CMD_SETGAMMA,
> +			      0x00, 0x06, 0x08, 0x2a, 0x31, 0x3f, 0x38, 0x36,
> +			      0x07, 0x0c, 0x0d, 0x11, 0x13, 0x12, 0x13, 0x11,
> +			      0x18, 0x00, 0x06, 0x08, 0x2a, 0x31, 0x3f, 0x38,
> +			      0x36, 0x07, 0x0c, 0x0d, 0x11, 0x13, 0x12, 0x13,
> +			      0x11, 0x18);
> +
> +	msleep(60);
> +
> +	DRM_DEV_DEBUG_DRIVER(dev, "Panel init sequence done\n");
> +	return 0;
> +}
> +
> +static int xpp055c272_unprepare(struct drm_panel *panel)
> +{
> +	struct xpp055c272 *ctx = panel_to_xpp055c272(panel);
> +	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
> +	int ret;
> +
> +	if (!ctx->prepared)
> +		return 0;
> +
> +	ret = mipi_dsi_dcs_set_display_off(dsi);
> +	if (ret < 0)
> +		DRM_DEV_ERROR(ctx->dev, "failed to set display off: %d\n",
> +			      ret);
> +
> +	mipi_dsi_dcs_enter_sleep_mode(dsi);
> +	if (ret < 0) {
> +		DRM_DEV_ERROR(ctx->dev, "failed to enter sleep mode: %d\n",
> +			      ret);
> +		return ret;
> +	}
> +
> +	regulator_disable(ctx->iovcc);
> +	regulator_disable(ctx->vci);
> +
> +	ctx->prepared = false;
> +
> +	return 0;
> +}
> +
> +static int xpp055c272_prepare(struct drm_panel *panel)
> +{
> +	struct xpp055c272 *ctx = panel_to_xpp055c272(panel);
> +	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
> +	int ret;
> +
> +	if (ctx->prepared)
> +		return 0;
> +
> +	DRM_DEV_DEBUG_DRIVER(ctx->dev, "Resetting the panel\n");
> +	ret = regulator_enable(ctx->vci);
> +	if (ret < 0) {
> +		DRM_DEV_ERROR(ctx->dev,
> +			      "Failed to enable vci supply: %d\n", ret);
> +		return ret;
> +	}
> +	ret = regulator_enable(ctx->iovcc);
> +	if (ret < 0) {
> +		DRM_DEV_ERROR(ctx->dev,
> +			      "Failed to enable iovcc supply: %d\n", ret);
> +		goto disable_vci;
> +	}
> +
> +	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
> +	/* T6: 10us */
> +	usleep_range(10, 20);
> +	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
> +
> +	/* T8: 20ms */
> +	msleep(20);
> +
> +	ret = xpp055c272_init_sequence(ctx);
> +	if (ret < 0) {
> +		DRM_DEV_ERROR(ctx->dev, "Panel init sequence failed: %d\n",
> +			      ret);
> +		goto disable_iovcc;
> +	}
> +
> +	ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
> +	if (ret < 0) {
> +		DRM_DEV_ERROR(ctx->dev, "Failed to exit sleep mode: %d\n", ret);
> +		goto disable_iovcc;
> +	}
> +
> +	/* T9: 120ms */
> +	msleep(120);
> +
> +	ret = mipi_dsi_dcs_set_display_on(dsi);
> +	if (ret < 0) {
> +		DRM_DEV_ERROR(ctx->dev, "Failed to set display on: %d\n", ret);
> +		goto disable_iovcc;
> +	}
> +
> +	msleep(50);
> +
> +	ctx->prepared = true;
> +
> +	return 0;
> +
> +disable_iovcc:
> +	regulator_disable(ctx->iovcc);
> +disable_vci:
> +	regulator_disable(ctx->vci);
> +	return ret;
> +}
> +
> +static const struct drm_display_mode default_mode = {
> +	.hdisplay	= 720,
> +	.hsync_start	= 720 + 40,
> +	.hsync_end	= 720 + 40 + 10,
> +	.htotal		= 720 + 40 + 10 + 40,
> +	.vdisplay	= 1280,
> +	.vsync_start	= 1280 + 22,
> +	.vsync_end	= 1280 + 22 + 4,
> +	.vtotal		= 1280 + 22 + 4 + 11,
> +	.vrefresh	= 60,
> +	.clock		= 64000,
> +	.width_mm	= 68,
> +	.height_mm	= 121,
> +};
> +
> +static int xpp055c272_get_modes(struct drm_panel *panel,
> +				struct drm_connector *connector)
> +{
> +	struct xpp055c272 *ctx = panel_to_xpp055c272(panel);
> +	struct drm_display_mode *mode;
> +
> +	mode = drm_mode_duplicate(connector->dev, &default_mode);
> +	if (!mode) {
> +		DRM_DEV_ERROR(ctx->dev, "Failed to add mode %ux%u@%u\n",
> +			      default_mode.hdisplay, default_mode.vdisplay,
> +			      default_mode.vrefresh);
> +		return -ENOMEM;
> +	}
> +
> +	drm_mode_set_name(mode);
> +
> +	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
> +	connector->display_info.width_mm = mode->width_mm;
> +	connector->display_info.height_mm = mode->height_mm;
> +	drm_mode_probed_add(connector, mode);
> +
> +	return 1;
> +}
> +
> +static const struct drm_panel_funcs xpp055c272_funcs = {
> +	.unprepare	= xpp055c272_unprepare,
> +	.prepare	= xpp055c272_prepare,
> +	.get_modes	= xpp055c272_get_modes,
> +};
> +
> +static int xpp055c272_probe(struct mipi_dsi_device *dsi)
> +{
> +	struct device *dev = &dsi->dev;
> +	struct xpp055c272 *ctx;
> +	int ret;
> +
> +	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
> +	if (!ctx)
> +		return -ENOMEM;
> +
> +	ctx->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
> +	if (IS_ERR(ctx->reset_gpio)) {
> +		DRM_DEV_ERROR(dev, "cannot get reset gpio\n");
> +		return PTR_ERR(ctx->reset_gpio);
> +	}
> +
> +	ctx->vci = devm_regulator_get(dev, "vci");
> +	if (IS_ERR(ctx->vci)) {
> +		ret = PTR_ERR(ctx->vci);
> +		if (ret != -EPROBE_DEFER)
> +			DRM_DEV_ERROR(dev,
> +				      "Failed to request vci regulator: %d\n",
> +				      ret);
> +		return ret;
> +	}
> +
> +	ctx->iovcc = devm_regulator_get(dev, "iovcc");
> +	if (IS_ERR(ctx->iovcc)) {
> +		ret = PTR_ERR(ctx->iovcc);
> +		if (ret != -EPROBE_DEFER)
> +			DRM_DEV_ERROR(dev,
> +				      "Failed to request iovcc regulator: %d\n",
> +				      ret);
> +		return ret;
> +	}
> +
> +	mipi_dsi_set_drvdata(dsi, ctx);
> +
> +	ctx->dev = dev;
> +
> +	dsi->lanes = 4;
> +	dsi->format = MIPI_DSI_FMT_RGB888;
> +	dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
> +			  MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_EOT_PACKET;
> +
> +	drm_panel_init(&ctx->panel, &dsi->dev, &xpp055c272_funcs,
> +		       DRM_MODE_CONNECTOR_DSI);
> +
> +	ret = drm_panel_of_backlight(&ctx->panel);
> +	if (ret) {
> +		DRM_DEV_ERROR(dev, "Failed to find backlight: %d\n", ret);
> +		return ret;
> +	}
> +
> +	drm_panel_add(&ctx->panel);
> +
> +	ret = mipi_dsi_attach(dsi);
> +	if (ret < 0) {
> +		DRM_DEV_ERROR(dev, "mipi_dsi_attach failed: %d\n", ret);
> +		drm_panel_remove(&ctx->panel);
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static void xpp055c272_shutdown(struct mipi_dsi_device *dsi)
> +{
> +	struct xpp055c272 *ctx = mipi_dsi_get_drvdata(dsi);
> +	int ret;
> +
> +	ret = drm_panel_unprepare(&ctx->panel);
> +	if (ret < 0)
> +		DRM_DEV_ERROR(&dsi->dev, "Failed to unprepare panel: %d\n",
> +			      ret);
> +
> +	ret = drm_panel_disable(&ctx->panel);
> +	if (ret < 0)
> +		DRM_DEV_ERROR(&dsi->dev, "Failed to disable panel: %d\n",
> +			      ret);
> +}
> +
> +static int xpp055c272_remove(struct mipi_dsi_device *dsi)
> +{
> +	struct xpp055c272 *ctx = mipi_dsi_get_drvdata(dsi);
> +	int ret;
> +
> +	xpp055c272_shutdown(dsi);
> +
> +	ret = mipi_dsi_detach(dsi);
> +	if (ret < 0)
> +		DRM_DEV_ERROR(&dsi->dev, "Failed to detach from DSI host: %d\n",
> +			      ret);
> +
> +	drm_panel_remove(&ctx->panel);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id xpp055c272_of_match[] = {
> +	{ .compatible = "xinpeng,xpp055c272" },
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, xpp055c272_of_match);
> +
> +static struct mipi_dsi_driver xpp055c272_driver = {
> +	.driver = {
> +		.name = "panel-xinpeng-xpp055c272",
> +		.of_match_table = xpp055c272_of_match,
> +	},
> +	.probe	= xpp055c272_probe,
> +	.remove = xpp055c272_remove,
> +	.shutdown = xpp055c272_shutdown,
> +};
> +module_mipi_dsi_driver(xpp055c272_driver);
> +
> +MODULE_AUTHOR("Heiko Stuebner <heiko.stuebner@...obroma-systems.com>");
> +MODULE_DESCRIPTION("DRM driver for Xinpeng xpp055c272 MIPI DSI panel");
> +MODULE_LICENSE("GPL v2");
> 

Powered by blists - more mailing lists