| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20191220064823.6115-2-sibis@codeaurora.org>
Date: Fri, 20 Dec 2019 12:18:22 +0530
From: Sibi Sankar <sibis@...eaurora.org>
To: bjorn.andersson@...aro.org, robh+dt@...nel.org,
rnayak@...eaurora.org, swboyd@...omium.org
Cc: agross@...nel.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, linux-arm-msm@...r.kernel.org,
mark.rutland@....com, dianders@...omium.org,
Sibi Sankar <sibis@...eaurora.org>
Subject: [PATCH v2 1/2] dt-bindings: power: rpmpd: Convert rpmpd bindings to yaml
Convert RPM/RPMH power-domain bindings to yaml.
Reviewed-by: Rajendra Nayak <rnayak@...eaurora.org>
Reviewed-by: Stephen Boyd <swboyd@...omium.org>
Signed-off-by: Sibi Sankar <sibis@...eaurora.org>
---
.../devicetree/bindings/power/qcom,rpmpd.txt | 150 ----------------
.../devicetree/bindings/power/qcom,rpmpd.yaml | 170 ++++++++++++++++++
2 files changed, 170 insertions(+), 150 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/power/qcom,rpmpd.txt
create mode 100644 Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
diff --git a/Documentation/devicetree/bindings/power/qcom,rpmpd.txt b/Documentation/devicetree/bindings/power/qcom,rpmpd.txt
deleted file mode 100644
index 6346d00b1b400..0000000000000
--- a/Documentation/devicetree/bindings/power/qcom,rpmpd.txt
+++ /dev/null
@@ -1,150 +0,0 @@
-Qualcomm RPM/RPMh Power domains
-
-For RPM/RPMh Power domains, we communicate a performance state to RPM/RPMh
-which then translates it into a corresponding voltage on a rail
-
-Required Properties:
- - compatible: Should be one of the following
- * qcom,msm8976-rpmpd: RPM Power domain for the msm8976 family of SoC
- * qcom,msm8996-rpmpd: RPM Power domain for the msm8996 family of SoC
- * qcom,msm8998-rpmpd: RPM Power domain for the msm8998 family of SoC
- * qcom,qcs404-rpmpd: RPM Power domain for the qcs404 family of SoC
- * qcom,sc7180-rpmhpd: RPMh Power domain for the sc7180 family of SoC
- * qcom,sdm845-rpmhpd: RPMh Power domain for the sdm845 family of SoC
- * qcom,sm8150-rpmhpd: RPMh Power domain for the sm8150 family of SoC
- - #power-domain-cells: number of cells in Power domain specifier
- must be 1.
- - operating-points-v2: Phandle to the OPP table for the Power domain.
- Refer to Documentation/devicetree/bindings/power/power_domain.txt
- and Documentation/devicetree/bindings/opp/opp.txt for more details
-
-Refer to <dt-bindings/power/qcom-rpmpd.h> for the level values for
-various OPPs for different platforms as well as Power domain indexes
-
-Example: rpmh power domain controller and OPP table
-
-#include <dt-bindings/power/qcom-rpmhpd.h>
-
-opp-level values specified in the OPP tables for RPMh power domains
-should use the RPMH_REGULATOR_LEVEL_* constants from
-<dt-bindings/power/qcom-rpmhpd.h>
-
- rpmhpd: power-controller {
- compatible = "qcom,sdm845-rpmhpd";
- #power-domain-cells = <1>;
- operating-points-v2 = <&rpmhpd_opp_table>;
-
- rpmhpd_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- rpmhpd_opp_ret: opp1 {
- opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
- };
-
- rpmhpd_opp_min_svs: opp2 {
- opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
- };
-
- rpmhpd_opp_low_svs: opp3 {
- opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
- };
-
- rpmhpd_opp_svs: opp4 {
- opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
- };
-
- rpmhpd_opp_svs_l1: opp5 {
- opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
- };
-
- rpmhpd_opp_nom: opp6 {
- opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
- };
-
- rpmhpd_opp_nom_l1: opp7 {
- opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
- };
-
- rpmhpd_opp_nom_l2: opp8 {
- opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
- };
-
- rpmhpd_opp_turbo: opp9 {
- opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
- };
-
- rpmhpd_opp_turbo_l1: opp10 {
- opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
- };
- };
- };
-
-Example: rpm power domain controller and OPP table
-
- rpmpd: power-controller {
- compatible = "qcom,msm8996-rpmpd";
- #power-domain-cells = <1>;
- operating-points-v2 = <&rpmpd_opp_table>;
-
- rpmpd_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- rpmpd_opp_low: opp1 {
- opp-level = <1>;
- };
-
- rpmpd_opp_ret: opp2 {
- opp-level = <2>;
- };
-
- rpmpd_opp_svs: opp3 {
- opp-level = <3>;
- };
-
- rpmpd_opp_normal: opp4 {
- opp-level = <4>;
- };
-
- rpmpd_opp_high: opp5 {
- opp-level = <5>;
- };
-
- rpmpd_opp_turbo: opp6 {
- opp-level = <6>;
- };
- };
- };
-
-Example: Client/Consumer device using OPP table
-
- leaky-device0@...50000 {
- compatible = "foo,i-leak-current";
- reg = <0x12350000 0x1000>;
- power-domains = <&rpmhpd SDM845_MX>;
- operating-points-v2 = <&leaky_opp_table>;
- };
-
-
- leaky_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- opp1 {
- opp-hz = /bits/ 64 <144000>;
- required-opps = <&rpmhpd_opp_low>;
- };
-
- opp2 {
- opp-hz = /bits/ 64 <400000>;
- required-opps = <&rpmhpd_opp_ret>;
- };
-
- opp3 {
- opp-hz = /bits/ 64 <20000000>;
- required-opps = <&rpmpd_opp_svs>;
- };
-
- opp4 {
- opp-hz = /bits/ 64 <25000000>;
- required-opps = <&rpmpd_opp_normal>;
- };
- };
diff --git a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
new file mode 100644
index 0000000000000..ba605310abeb8
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
@@ -0,0 +1,170 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/qcom,rpmpd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPM/RPMh Power domains
+
+maintainers:
+ - Rajendra Nayak <rnayak@...eaurora.org>
+
+description:
+ For RPM/RPMh Power domains, we communicate a performance state to RPM/RPMh
+ which then translates it into a corresponding voltage on a rail.
+
+properties:
+ compatible:
+ enum:
+ - qcom,msm8976-rpmpd
+ - qcom,msm8996-rpmpd
+ - qcom,msm8998-rpmpd
+ - qcom,qcs404-rpmpd
+ - qcom,sc7180-rpmhpd
+ - qcom,sdm845-rpmhpd
+ - qcom,sm8150-rpmhpd
+
+ '#power-domain-cells':
+ const: 1
+
+ operating-points-v2: true
+
+ opp-table:
+ type: object
+
+required:
+ - compatible
+ - '#power-domain-cells'
+ - operating-points-v2
+
+additionalProperties: false
+
+examples:
+ - |
+
+ // Example 1 (rpmh power domain controller and OPP table):
+
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ rpmhpd: power-controller {
+ compatible = "qcom,sdm845-rpmhpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmhpd_opp_table>;
+
+ rpmhpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ rpmhpd_opp_ret: opp1 {
+ opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+ };
+
+ rpmhpd_opp_min_svs: opp2 {
+ opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+ };
+
+ rpmhpd_opp_low_svs: opp3 {
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+ };
+
+ rpmhpd_opp_svs: opp4 {
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+ };
+
+ rpmhpd_opp_svs_l1: opp5 {
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+ };
+
+ rpmhpd_opp_nom: opp6 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+ };
+
+ rpmhpd_opp_nom_l1: opp7 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+ };
+
+ rpmhpd_opp_nom_l2: opp8 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+ };
+
+ rpmhpd_opp_turbo: opp9 {
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+ };
+
+ rpmhpd_opp_turbo_l1: opp10 {
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+ };
+ };
+ };
+
+ - |
+
+ // Example 2 (rpm power domain controller and OPP table):
+
+ rpmpd: power-controller {
+ compatible = "qcom,msm8996-rpmpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmpd_opp_table>;
+
+ rpmpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ rpmpd_opp_low: opp1 {
+ opp-level = <1>;
+ };
+
+ rpmpd_opp_ret: opp2 {
+ opp-level = <2>;
+ };
+
+ rpmpd_opp_svs: opp3 {
+ opp-level = <3>;
+ };
+
+ rpmpd_opp_normal: opp4 {
+ opp-level = <4>;
+ };
+
+ rpmpd_opp_high: opp5 {
+ opp-level = <5>;
+ };
+
+ rpmpd_opp_turbo: opp6 {
+ opp-level = <6>;
+ };
+ };
+ };
+
+ - |
+
+ // Example 3 (Client/Consumer device using OPP table):
+
+ leaky-device0@...50000 {
+ compatible = "foo,i-leak-current";
+ reg = <0x12350000 0x1000>;
+ power-domains = <&rpmhpd 0>;
+ operating-points-v2 = <&leaky_opp_table>;
+ };
+
+ leaky_opp_table: opp-table {
+ compatible = "operating-points-v2";
+ opp1 {
+ opp-hz = /bits/ 64 <144000>;
+ required-opps = <&rpmhpd_opp_low>;
+ };
+
+ opp2 {
+ opp-hz = /bits/ 64 <400000>;
+ required-opps = <&rpmhpd_opp_ret>;
+ };
+
+ opp3 {
+ opp-hz = /bits/ 64 <20000000>;
+ required-opps = <&rpmpd_opp_svs>;
+ };
+
+ opp4 {
+ opp-hz = /bits/ 64 <25000000>;
+ required-opps = <&rpmpd_opp_normal>;
+ };
+ };
+...
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
Powered by blists - more mailing lists