linux-kernel - Re: [PATCH 4/5] ARM: dts: mmp3: Add HSIC controllers

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 20 Dec 2019 08:05:50 +0100
From:   Lubomir Rintel <lkundrak@...sk>
To:     Olof Johansson <olof@...om.net>
Cc:     Arnd Bergmann <arnd@...db.de>,
        Kishon Vijay Abraham I <kishon@...com>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Michael Turquette <mturquette@...libre.com>,
        Stephen Boyd <sboyd@...nel.org>, linux-kernel@...r.kernel.org,
        devicetree@...r.kernel.org, linux-clk@...r.kernel.org,
        soc@...nel.org
Subject: Re: [PATCH 4/5] ARM: dts: mmp3: Add HSIC controllers

On Fri, 2019-12-20 at 07:53 +0100, Lubomir Rintel wrote:
> There are two on MMP3, along with the PHYs. The PHYs are made compatible
> with the NOP transceiver, since there's no driver for the time being and
> they're likely configured by the firmware.
> 
> Signed-off-by: Lubomir Rintel <lkundrak@...sk>
> ---
>  arch/arm/boot/dts/mmp3.dtsi | 44 +++++++++++++++++++++++++++++++++++++
>  1 file changed, 44 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/mmp3.dtsi b/arch/arm/boot/dts/mmp3.dtsi
> index d9762de0ed34b..36c50706e60e0 100644
> --- a/arch/arm/boot/dts/mmp3.dtsi
> +++ b/arch/arm/boot/dts/mmp3.dtsi
> @@ -201,6 +201,50 @@ usb_otg0: usb-otg@...08000 {
>  				status = "disabled";
>  			};
>  
> +			hsic_phy0: hsic-phy@...01800 {
> +				compatible = "marvell,mmp3-hsic-phy",
> +					     "usb-nop-xceiv",

I managed to mess this up right before sending it out.     ^^^
Sorry for that. There should be a semicolon there. I'll fix this up on
next patch spin.

> +				reg = <0xf0001800 0x40>;
> +				#phy-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			hsic0: hsic@...01000 {
> +				compatible = "marvell,pxau2o-ehci";
> +				reg = <0xf0001000 0x200>;
> +				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&soc_clocks MMP2_CLK_USBHSIC0>;
> +				clock-names = "USBCLK";
> +				phys = <&hsic_phy0>;
> +				phy-names = "usb";
> +				phy_type = "hsic";
> +				#address-cells = <0x01>;
> +				#size-cells = <0x00>;
> +				status = "disabled";
> +			};
> +
> +			hsic_phy1: hsic-phy@...02800 {
> +				compatible = "marvell,mmp3-hsic-phy",
> +					     "usb-nop-xceiv",
> +				reg = <0xf0002800 0x40>;
> +				#phy-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			hsic1: hsic@...02000 {
> +				compatible = "marvell,pxau2o-ehci";
> +				reg = <0xf0002000 0x200>;
> +				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&soc_clocks MMP2_CLK_USBHSIC1>;
> +				clock-names = "USBCLK";
> +				phys = <&hsic_phy1>;
> +				phy-names = "usb";
> +				phy_type = "hsic";
> +				#address-cells = <0x01>;
> +				#size-cells = <0x00>;
> +				status = "disabled";
> +			};
> +
>  			mmc1: mmc@...80000 {
>  				compatible = "mrvl,pxav3-mmc";
>  				reg = <0xd4280000 0x120>;