linux-kernel - RE: [PATCH V3 1/2] dt-bindings/irq: add binding for NXP INTMUX interrupt multiplexer

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <DB7PR04MB4618D835938530D6051A02C1E62D0@DB7PR04MB4618.eurprd04.prod.outlook.com>
Date:   Fri, 20 Dec 2019 07:44:48 +0000
From:   Joakim Zhang <qiangqing.zhang@....com>
To:     Joakim Zhang <qiangqing.zhang@....com>,
        "maz@...nel.org" <maz@...nel.org>,
        "tglx@...utronix.de" <tglx@...utronix.de>,
        "jason@...edaemon.net" <jason@...edaemon.net>,
        "robh+dt@...nel.org" <robh+dt@...nel.org>,
        "mark.rutland@....com" <mark.rutland@....com>,
        "shawnguo@...nel.org" <shawnguo@...nel.org>,
        "s.hauer@...gutronix.de" <s.hauer@...gutronix.de>
CC:     "kernel@...gutronix.de" <kernel@...gutronix.de>,
        dl-linux-imx <linux-imx@....com>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        Andy Duan <fugang.duan@....com>,
        "linux-arm-kernel@...ts.infradead.org" 
        <linux-arm-kernel@...ts.infradead.org>
Subject: RE: [PATCH V3 1/2] dt-bindings/irq: add binding for NXP INTMUX
 interrupt multiplexer


> -----Original Message-----
> From: Joakim Zhang <qiangqing.zhang@....com>
> Sent: 2019年12月20日 15:37
> To: maz@...nel.org; tglx@...utronix.de; jason@...edaemon.net;
> robh+dt@...nel.org; mark.rutland@....com; shawnguo@...nel.org;
> s.hauer@...gutronix.de
> Cc: kernel@...gutronix.de; dl-linux-imx <linux-imx@....com>;
> linux-kernel@...r.kernel.org; Andy Duan <fugang.duan@....com>;
> linux-arm-kernel@...ts.infradead.org; Joakim Zhang
> <qiangqing.zhang@....com>
> Subject: [PATCH V3 1/2] dt-bindings/irq: add binding for NXP INTMUX interrupt
> multiplexer
> 
> This patch adds the DT bindings for the NXP INTMUX interrupt multiplexer for
> i.MX8 family SoCs.
> 
> Signed-off-by: Joakim Zhang <qiangqing.zhang@....com>
> ---
>  .../interrupt-controller/fsl,intmux.txt       | 36 +++++++++++++++++++
>  1 file changed, 36 insertions(+)
>  create mode 100644
> Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.txt
> 
> diff --git
> a/Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.txt
> b/Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.txt
> new file mode 100644
> index 000000000000..3ebe9cac5f20
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.
> +++ txt
> @@ -0,0 +1,36 @@
> +Freescale INTMUX interrupt multiplexer
> +
> +Required properties:
> +
> +- compatible: Should be:
> +   - "fsl,imx-intmux"
> +- reg: Physical base address and size of registers.
> +- interrupts: Should contain the parent interrupt lines (up to 8) used
> +to
> +  multiplex the input interrupts.
> +- clocks: Should contain one clock for entry in clock-names.
> +- clock-names:
> +   - "ipg": main logic clock
> +- interrupt-controller: Identifies the node as an interrupt controller.
> +- #interrupt-cells: Specifies the number of cells needed to encode an
> +  interrupt source. The value must be 2.
> +   - the 1st cell: hardware interrupt number
> +   - the 2nd cell: channel index, value must smaller than channels used
> +
> +Optional properties:
> +
> +- fsl,intmux_chans: The number of channels used for interrupt source.
> +The
> +  Maximum value is 8. If this property is not set in DT then driver
> +uses
> +  1 channel by default.
> +
> +Example:
> +
> +	intmux@...00000 {
> +		compatible = "fsl,imx-intmux";
> +		reg = <0x37400000 0x1000>;
> +		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&clk IMX8QM_CM40_IPG_CLK>;
> +		clock-names = "ipg";
> +		interrupt-controller;
> +		#interrupt-cells = <1>;
Hi Marc,

I am so sorry, this should be #interrupt-cells = <2>, will correct it in next version.

Best Regards,
Joakim Zhang
> +	};
> +
> --
> 2.17.1