[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20191223122357.52d0ac11@archlinux>
Date: Mon, 23 Dec 2019 12:23:57 +0000
From: Jonathan Cameron <jic23@...nel.org>
To: <Eugen.Hristev@...rochip.com>
Cc: <robh+dt@...nel.org>, <alexandre.belloni@...tlin.com>,
<Nicolas.Ferre@...rochip.com>, <linux-iio@...r.kernel.org>,
<devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <linux-rtc@...r.kernel.org>,
<a.zummo@...ertech.it>, <Ludovic.Desroches@...rochip.com>
Subject: Re: [PATCH 07/10] iio: adc: at91-sama5d2_adc: fix differential
channels in triggered mode
On Wed, 18 Dec 2019 16:24:02 +0000
<Eugen.Hristev@...rochip.com> wrote:
> From: Eugen Hristev <eugen.hristev@...rochip.com>
>
> The differential channels require writing the channel offset register (COR).
> Otherwise they do not work in differential mode.
> The configuration of COR is missing in triggered mode.
>
> Signed-off-by: Eugen Hristev <eugen.hristev@...rochip.com>
I'm not totally sure whether this predates the changes here, but if it does
please pull it to the front of the set and give it a fixes tag.
Otherwise, look at merging it in with where-ever it was introduced.
Thanks,
Jonathan
> ---
> drivers/iio/adc/at91-sama5d2_adc.c | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama5d2_adc.c
> index a6b4dff..ccffa48 100644
> --- a/drivers/iio/adc/at91-sama5d2_adc.c
> +++ b/drivers/iio/adc/at91-sama5d2_adc.c
> @@ -900,6 +900,7 @@ static int at91_adc_buffer_postenable(struct iio_dev *indio)
>
> for_each_set_bit(bit, indio->active_scan_mask, indio->num_channels) {
> struct iio_chan_spec const *chan = at91_adc_chan_get(indio, bit);
> + u32 cor;
>
> if (!chan)
> continue;
> @@ -908,6 +909,17 @@ static int at91_adc_buffer_postenable(struct iio_dev *indio)
> chan->type == IIO_PRESSURE)
> continue;
>
> + cor = at91_adc_readl(st, AT91_SAMA5D2_COR);
> +
> + if (chan->differential)
> + cor |= (BIT(chan->channel) | BIT(chan->channel2)) <<
> + AT91_SAMA5D2_COR_DIFF_OFFSET;
> + else
> + cor &= ~(BIT(chan->channel) <<
> + AT91_SAMA5D2_COR_DIFF_OFFSET);
> +
> + at91_adc_writel(st, AT91_SAMA5D2_COR, cor);
> +
> at91_adc_writel(st, AT91_SAMA5D2_CHER, BIT(chan->channel));
> if (use_irq) {
> at91_adc_writel(st, AT91_SAMA5D2_IER,
Powered by blists - more mailing lists