linux-kernel - [PATCH] pinctrl: meson: meson8b: add the GPIOH pinmux settings for ETH

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20191226191425.3797490-1-martin.blumenstingl@googlemail.com>
Date:   Thu, 26 Dec 2019 20:14:25 +0100
From:   Martin Blumenstingl <martin.blumenstingl@...glemail.com>
To:     linus.walleij@...aro.org, linux-gpio@...r.kernel.org,
        linux-amlogic@...ts.infradead.org
Cc:     linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        Martin Blumenstingl <martin.blumenstingl@...glemail.com>
Subject: [PATCH] pinctrl: meson: meson8b: add the GPIOH pinmux settings for ETH_RXD{2,3}

GPIOH_5 and GPIOH_6 can have two Ethernet related functions:
- GPIOH_5 can be ETH_TXD1 or ETH_RXD3
- GPIOH_6 can be ETH_TXD0 or ETH_RXD2

Add the bits for eth_rxd3_h and eth_rxd2_h so the ETH_RXD function can
be disabled when using the ETH_TXD function of GPIOH_{5,6}. No problem
was observed so far, but in theory this could lead to two different
signals being routed to the same pad (which could break Ethernet).

These settings were found in the public "Amlogic Ethernet controller
user guide":
http://openlinux.amlogic.com/@api/deki/files/75/=Amlogic_Ethenet_controller_user_Guide.pdf

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@...glemail.com>
---
 drivers/pinctrl/meson/pinctrl-meson8b.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/meson/pinctrl-meson8b.c b/drivers/pinctrl/meson/pinctrl-meson8b.c
index 2d5339edd0b7..6cd4b3ec1b40 100644
--- a/drivers/pinctrl/meson/pinctrl-meson8b.c
+++ b/drivers/pinctrl/meson/pinctrl-meson8b.c
@@ -233,6 +233,8 @@ static const unsigned int hdmi_scl_pins[]	= { GPIOH_2 };
 static const unsigned int hdmi_cec_0_pins[]	= { GPIOH_3 };
 static const unsigned int eth_txd1_0_pins[]	= { GPIOH_5 };
 static const unsigned int eth_txd0_0_pins[]	= { GPIOH_6 };
+static const unsigned int eth_rxd3_h_pins[]	= { GPIOH_5 };
+static const unsigned int eth_rxd2_h_pins[]	= { GPIOH_6 };
 static const unsigned int clk_24m_out_pins[]	= { GPIOH_9 };
 
 static const unsigned int spi_ss1_pins[]	= { GPIOH_0 };
@@ -535,6 +537,8 @@ static struct meson_pmx_group meson8b_cbus_groups[] = {
 	GROUP(spi_miso_1,	9,	12),
 	GROUP(spi_mosi_1,	9,	11),
 	GROUP(spi_sclk_1,	9,	10),
+	GROUP(eth_rxd3_h,	6,	15),
+	GROUP(eth_rxd2_h,	6,	14),
 	GROUP(eth_txd3,		6,	13),
 	GROUP(eth_txd2,		6,	12),
 	GROUP(eth_tx_clk,	6,	11),
@@ -746,7 +750,8 @@ static const char * const ethernet_groups[] = {
 	"eth_tx_clk", "eth_tx_en", "eth_txd1_0", "eth_txd1_1",
 	"eth_txd0_0", "eth_txd0_1", "eth_rx_clk", "eth_rx_dv",
 	"eth_rxd1", "eth_rxd0", "eth_mdio_en", "eth_mdc", "eth_ref_clk",
-	"eth_txd2", "eth_txd3", "eth_rxd3", "eth_rxd2"
+	"eth_txd2", "eth_txd3", "eth_rxd3", "eth_rxd2",
+	"eth_rxd3_h", "eth_rxd2_h"
 };
 
 static const char * const i2c_a_groups[] = {
-- 
2.24.1