| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1577350475-127530-1-git-send-email-pengms1@lenovo.com>
Date: Thu, 26 Dec 2019 16:54:35 +0800
From: Andrew Peng <pengms1@...ovo.com>
To: joel@....id.au, robh+dt@...nel.org, mark.rutland@....com,
andrew@...id.au, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-aspeed@...ts.ozlabs.org, linux-kernel@...r.kernel.org,
benjaminfair@...gle.com, openbmc@...ts.ozlabs.org
Cc: Andrew Peng <pengms1@...ovo.com>, Derek Lin <dlin23@...ovo.com>,
Yonghui Liu <liuyh21@...ovo.com>
Subject: [PATCH v1 1/1] ARM: dts: aspeed: update Hr855xg2 device tree
Update i2c aliases.
Change flash_memory mapping address and size.
Add in a gpio-keys section.
Enable vhub, vuart, spi1 and spi2.
Add raa228006, ir38164 and sn1701022 hwmon sensors.
Remove some unuse gpio from gpio section.
Signed-off-by: Andrew Peng <pengms1@...ovo.com>
Signed-off-by: Derek Lin <dlin23@...ovo.com>
Signed-off-by: Yonghui Liu <liuyh21@...ovo.com>
---
v1: initial version
arch/arm/boot/dts/aspeed-bmc-lenovo-hr855xg2.dts | 557 ++++++++++++++++-------
1 file changed, 382 insertions(+), 175 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-bmc-lenovo-hr855xg2.dts b/arch/arm/boot/dts/aspeed-bmc-lenovo-hr855xg2.dts
index 8193fad..e1386d4 100644
--- a/arch/arm/boot/dts/aspeed-bmc-lenovo-hr855xg2.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-lenovo-hr855xg2.dts
@@ -15,14 +15,21 @@
compatible = "lenovo,hr855xg2-bmc", "aspeed,ast2500";
aliases {
- i2c14 = &i2c_riser1;
- i2c15 = &i2c_riser2;
- i2c16 = &i2c_riser3;
- i2c17 = &i2c_M2;
- i2c18 = &channel_0;
- i2c19 = &channel_1;
- i2c20 = &channel_2;
- i2c21 = &channel_3;
+ i2c14 = &pcie_slot8;
+ i2c15 = &pcie_slot9;
+ i2c16 = &pcie_slot10;
+ i2c17 = &pcie_slot11;
+ i2c18 = &pcie_slot12;
+ i2c19 = &switch0_i2c5;
+ i2c22 = &switch1_i2c0;
+ i2c23 = &pcie_slot6;
+ i2c24 = &pcie_slot7;
+ i2c30 = &pcie_slot1;
+ i2c31 = &pcie_slot2;
+ i2c32 = &pcie_slot3;
+ i2c33 = &pcie_slot4;
+ i2c34 = &pcie_slot5;
+ i2c35 = &switch2_i2c5;
};
chosen {
@@ -40,9 +47,9 @@
#size-cells = <1>;
ranges;
- flash_memory: region@...00000 {
+ flash_memory: region@...F0000 {
no-map;
- reg = <0x98000000 0x00100000>; /* 1M */
+ reg = <0x9EFF0000 0x00010000>; /* 64K */
};
gfx_memory: framebuffer {
@@ -78,6 +85,87 @@
io-channels = <&adc 15>;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ id-button {
+ label = "id-button";
+ gpios = <&gpio ASPEED_GPIO(Y, 2) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(Y, 2)>;
+ };
+
+ pwr-button {
+ label = "pwr-button";
+ gpios = <&gpio ASPEED_GPIO(I, 1) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(I, 1)>;
+ };
+
+ cpu-caterr {
+ label = "cpu-caterr";
+ gpios = <&gpio ASPEED_GPIO(G, 1) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(G, 1)>;
+ };
+
+ int-fpga-bmc {
+ label = "int-fpga-bmc";
+ gpios = <&gpio ASPEED_GPIO(F, 5) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(F, 5)>;
+ };
+
+ pdb-alt-n {
+ label = "pdb-alt-n";
+ gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(AA, 1)>;
+ };
+
+ p12v-aux1-alert1-n {
+ label = "p12v-aux1-alert1-n";
+ gpios = <&gpio ASPEED_GPIO(AA, 7) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(AA, 7)>;
+ };
+
+ p12v-aux2-alert1-n {
+ label = "p12v-aux2-alert1-n";
+ gpios = <&gpio ASPEED_GPIO(J, 0) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(J, 0)>;
+ };
+
+ p12v-aux3-alert1-n {
+ label = "p12v-aux3-alert1-n";
+ gpios = <&gpio ASPEED_GPIO(G, 5) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(G, 5)>;
+ };
+
+ ddr-vr-bmc-alert-n {
+ label = "ddr-vr-bmc-alert-n";
+ gpios = <&gpio ASPEED_GPIO(L, 7) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(L, 7)>;
+ };
+
+ cpu-vr-bmc-alert-n {
+ label = "cpu-vr-bmc-alert-n";
+ gpios = <&gpio ASPEED_GPIO(L, 6) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(L, 6)>;
+ };
+
+ riser1-vr-al-r {
+ label = "riser1-vr-al-r";
+ gpios = <&gpio ASPEED_GPIO(AB, 1) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(AB, 1)>;
+ };
+
+ riser2-vr-al-r {
+ label = "riser2-vr-al-r";
+ gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(F, 1)>;
+ };
+
+ riser3-vr-al-r {
+ label = "riser3-vr-al-r";
+ gpios = <&gpio ASPEED_GPIO(A, 1) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(A, 1)>;
+ };
+ };
};
&fmc {
@@ -91,10 +179,13 @@
};
};
+&vhub {
+ status = "okay";
+};
+
&lpc_ctrl {
status = "okay";
memory-region = <&flash_memory>;
- flash = <&spi1>;
};
&lpc_snoop {
@@ -102,11 +193,39 @@
snoop-ports = <0x80>;
};
-&uart1 {
+&spi1 {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "pnor";
+ spi-max-frequency = <40000000>;
+ };
+};
+
+&spi2 {
status = "okay";
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_txd1_default
- &pinctrl_rxd1_default>;
+ pinctrl-0 = <&pinctrl_spi2ck_default
+ &pinctrl_spi2cs0_default
+ &pinctrl_spi2miso_default
+ &pinctrl_spi2mosi_default>;
+
+ spidev@0 {
+ status = "okay";
+ compatible = "aspeed,spidev";
+ reg = < 0 >;
+ spi-max-frequency = <50000000>;
+ };
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ m25p,fast-read;
+ label = "fpga";
+ reg = < 0 >;
+ spi-max-frequency = <50000000>;
+ status = "okay";
+ };
};
&uart2 {
@@ -123,12 +242,14 @@
&pinctrl_nri2_default>;
};
-&uart3 {
+&uart5 {
status = "okay";
};
-&uart5 {
+&vuart {
status = "okay";
+ auto-flow-control;
+ espi-enabled = <&syscon 0x70 25>;
};
&ibt {
@@ -140,7 +261,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rmii1_default>;
clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
- <&syscon ASPEED_CLK_GATE_MAC1RCLK>;
+ <&syscon ASPEED_CLK_MAC1RCLK>;
clock-names = "MACCLK", "RCLK";
use-ncsi;
};
@@ -172,37 +293,77 @@
&pinctrl_adc15_default>;
};
+&peci0 {
+ status = "okay";
+ peci-client@30 {
+ compatible = "intel,peci-client";
+ reg = <0x30>;
+ };
+
+ peci-client@31 {
+ compatible = "intel,peci-client";
+ reg = <0x31>;
+ };
+
+ peci-client@32 {
+ compatible = "intel,peci-client";
+ reg = <0x32>;
+ };
+
+ peci-client@33 {
+ compatible = "intel,peci-client";
+ reg = <0x33>;
+ };
+};
+
&i2c0 {
status = "okay";
- i2c-switch@70 {
- compatible = "nxp,pca9545";
- reg = <0x70>;
+ i2c-switch@71 {
+ compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
+ reg = <0x71>;
- i2c_riser1: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
+ pcie_slot8: i2c@0{
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
};
- i2c_riser2: i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
+ pcie_slot9: i2c@1{
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
};
- i2c_riser3: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
+ pcie_slot10: i2c@2{
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
};
- i2c_M2: i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
+ pcie_slot11: i2c@3{
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ pcie_slot12: i2c@4{
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ switch0_i2c5:i2c@5{
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ eeprom@54 {
+ compatible = "atmel,24c04";
+ pagesize = <16>;
+ reg = <0x54>;
+ };
};
};
};
@@ -216,13 +377,43 @@
};
VR@45 {
- compatible = "pmbus";
+ compatible = "raa228006";
reg = <0x45>;
};
};
&i2c2 {
status = "okay";
+
+ i2c-switch@71 {
+ compatible = "nxp,pca9545";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x71>;
+
+ switch1_i2c0:i2c@0{
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ eeprom@54 {
+ compatible = "atmel,24c04";
+ pagesize = <16>;
+ reg = <0x54>;
+ };
+ };
+
+ pcie_slot6:i2c@1{
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ pcie_slot7:i2c@2{
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ };
};
&i2c3 {
@@ -265,6 +456,66 @@
&i2c5 {
status = "okay";
+
+ CPU0_VCCIN@60 {
+ compatible = "raa228006";
+ reg = <0x60>;
+ };
+
+ CPU1_VCCIN@62 {
+ compatible = "raa228006";
+ reg = <0x62>;
+ };
+
+ CPU2_VCCIN@64 {
+ compatible = "raa228006";
+ reg = <0x64>;
+ };
+
+ CPU3_VCCIN@66 {
+ compatible = "raa228006";
+ reg = <0x66>;
+ };
+
+ CPU0_VCCSA@46 {
+ compatible = "ir38164";
+ reg = <0x46>;
+ };
+
+ CPU1_VCCSA@47 {
+ compatible = "ir38164";
+ reg = <0x47>;
+ };
+
+ CPU2_VCCSA@48 {
+ compatible = "ir38164";
+ reg = <0x48>;
+ };
+
+ CPU3_VCCSA@49 {
+ compatible = "ir38164";
+ reg = <0x49>;
+ };
+
+ CPU0_VCCIO@41 {
+ compatible = "ir38164";
+ reg = <0x41>;
+ };
+
+ CPU1_VCCIO@42 {
+ compatible = "ir38164";
+ reg = <0x42>;
+ };
+
+ CPU2_VCCIO@43 {
+ compatible = "ir38164";
+ reg = <0x43>;
+ };
+
+ CPU3_VCCIO@44 {
+ compatible = "ir38164";
+ reg = <0x44>;
+ };
};
&i2c6 {
@@ -284,7 +535,7 @@
eeprom@54 {
compatible = "atmel,24c256";
reg = <0x54>;
- pagesize = <16>;
+ pagesize = <64>;
};
};
@@ -306,10 +557,99 @@
&i2c11 {
status = "okay";
+
+ i2c-switch@71 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x71>;
+
+ pcie_slot1: i2c@0{
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ pcie_slot2: i2c@1{
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ pcie_slot3: i2c@2{
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ pcie_slot4: i2c@3{
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ pcie_slot5: i2c@4{
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ switch2_i2c5:i2c@5{
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ eeprom@54 {
+ compatible = "atmel,24c04";
+ pagesize = <16>;
+ reg = <0x54>;
+ };
+ };
+ };
};
&i2c13 {
status = "okay";
+
+ CPU0_VDDQ_ABC@58 {
+ compatible = "sn1701022";
+ reg = <0x58>;
+ };
+
+ CPU0_VDDQ_DEF@5a {
+ compatible = "sn1701022";
+ reg = <0x5a>;
+ };
+
+ CPU1_VDDQ_ABC@5c {
+ compatible = "sn1701022";
+ reg = <0x5c>;
+ };
+
+ CPU1_VDDQ_DEF@5e {
+ compatible = "sn1701022";
+ reg = <0x5e>;
+ };
+
+ CPU2_VDDQ_ABC@68 {
+ compatible = "sn1701022";
+ reg = <0x68>;
+ };
+
+ CPU2_VDDQ_DEF@6a {
+ compatible = "sn1701022";
+ reg = <0x6a>;
+ };
+
+ CPU3_VDDQ_ABC@6c {
+ compatible = "sn1701022";
+ reg = <0x6c>;
+ };
+
+ CPU3_VDDQ_DEF@6e {
+ compatible = "sn1701022";
+ reg = <0x6e>;
+ };
+
};
&ehci1 {
@@ -425,20 +765,6 @@
&gpio {
- pin_gpio_a1 {
- gpio-hog;
- gpios = <ASPEED_GPIO(A, 1) GPIO_ACTIVE_LOW>;
- output-high;
- line-name = "BMC_EMMC_RST_N";
- };
-
- pin_gpio_a3 {
- gpio-hog;
- gpios = <ASPEED_GPIO(A, 3) GPIO_ACTIVE_LOW>;
- output-high;
- line-name = "PCH_PWROK_BMC_FPGA";
- };
-
pin_gpio_b5 {
gpio-hog;
gpios = <ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
@@ -453,27 +779,6 @@
line-name = "CPU_SM_WP";
};
- pin_gpio_e0 {
- gpio-hog;
- gpios = <ASPEED_GPIO(E, 0) GPIO_ACTIVE_HIGH>;
- input;
- line-name = "PDB_PSU_SEL";
- };
-
- pin_gpio_e2 {
- gpio-hog;
- gpios = <ASPEED_GPIO(E, 2) GPIO_ACTIVE_HIGH>;
- output-high;
- line-name = "LOCATOR_LED_N";
- };
-
- pin_gpio_e5 {
- gpio-hog;
- gpios = <ASPEED_GPIO(E, 5) GPIO_ACTIVE_HIGH>;
- output-high;
- line-name = "FM_BMC_DBP_PRESENT_R1_N";
- };
-
pin_gpio_e6 {
gpio-hog;
gpios = <ASPEED_GPIO(E, 6) GPIO_ACTIVE_HIGH>;
@@ -481,18 +786,11 @@
line-name = "BMC_ME_SECURITY_OVERRIDE_N";
};
- pin_gpio_f0 {
+ pin_gpio_g7 {
gpio-hog;
- gpios = <ASPEED_GPIO(F, 0) GPIO_ACTIVE_HIGH>;
+ gpios = <ASPEED_GPIO(G, 7) GPIO_ACTIVE_HIGH>;
output-high;
- line-name = "IRQ_BMC_PCH_NMI_R";
- };
-
- pin_gpio_f1 {
- gpio-hog;
- gpios = <ASPEED_GPIO(F, 1) GPIO_ACTIVE_HIGH>;
- input;
- line-name = "CPU2_PROCDIS_BMC_N";
+ line-name = "BMC_PCIE_I2C_MUX_RST_N";
};
pin_gpio_f2 {
@@ -516,34 +814,6 @@
line-name = "BMC_FORCE_NM_THROTTLE_N";
};
- pin_gpio_f6 {
- gpio-hog;
- gpios = <ASPEED_GPIO(F, 6) GPIO_ACTIVE_HIGH>;
- output-high;
- line-name = "FM_BMC_CPU_PWR_DEBUG_N";
- };
-
- pin_gpio_g7 {
- gpio-hog;
- gpios = <ASPEED_GPIO(G, 7) GPIO_ACTIVE_HIGH>;
- output-high;
- line-name = "BMC_PCIE_I2C_MUX_RST_N";
- };
-
- pin_gpio_h6 {
- gpio-hog;
- gpios = <ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>;
- output-high;
- line-name = "FM_BMC_DBP_PRESENT_R2_N";
- };
-
- pin_gpio_i3 {
- gpio-hog;
- gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
- output-high;
- line-name = "SPI_BMC_BIOS_WP_N";
- };
-
pin_gpio_j1 {
gpio-hog;
gpios = <ASPEED_GPIO(J, 1) GPIO_ACTIVE_HIGH>;
@@ -565,20 +835,6 @@
line-name = "SPI_BMC_BIOS_HOLD_N";
};
- pin_gpio_l0 {
- gpio-hog;
- gpios = <ASPEED_GPIO(L, 0) GPIO_ACTIVE_HIGH>;
- output-high;
- line-name = "PDB_FAN_TACH_SEL";
- };
-
- pin_gpio_l1 {
- gpio-hog;
- gpios = <ASPEED_GPIO(L, 1) GPIO_ACTIVE_HIGH>;
- output-high;
- line-name = "SYS_RESET_BMC_FPGA_N";
- };
-
pin_gpio_l4 {
gpio-hog;
gpios = <ASPEED_GPIO(L, 4) GPIO_ACTIVE_HIGH>;
@@ -593,27 +849,6 @@
line-name = "FM_EFUSE_FAN_G2_EN";
};
- pin_gpio_r6 {
- gpio-hog;
- gpios = <ASPEED_GPIO(R, 6) GPIO_ACTIVE_HIGH>;
- input;
- line-name = "CPU3_PROCDIS_BMC_N";
- };
-
- pin_gpio_r7 {
- gpio-hog;
- gpios = <ASPEED_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
- input;
- line-name = "CPU4_PROCDIS_BMC_N";
- };
-
- pin_gpio_s1 {
- gpio-hog;
- gpios = <ASPEED_GPIO(S, 1) GPIO_ACTIVE_HIGH>;
- output-low;
- line-name = "DBP_SYSPWROK_BMC";
- };
-
pin_gpio_s2 {
gpio-hog;
gpios = <ASPEED_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
@@ -621,13 +856,6 @@
line-name = "PCH_RST_RSMRST_N";
};
- pin_gpio_s6 {
- gpio-hog;
- gpios = <ASPEED_GPIO(S, 6) GPIO_ACTIVE_HIGH>;
- output-high;
- line-name = "BMC_HW_STRAP_5";
- };
-
pin_gpio_z3 {
gpio-hog;
gpios = <ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
@@ -638,29 +866,8 @@
pin_gpio_aa0 {
gpio-hog;
gpios = <ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
- output-low;
- line-name = "FW_PSU_ALERT_EN_N";
- };
-
- pin_gpio_aa4 {
- gpio-hog;
- gpios = <ASPEED_GPIO(AA, 4) GPIO_ACTIVE_HIGH>;
output-high;
- line-name = "DBP_CPU_PREQ_N";
- };
-
- pin_gpio_ab3 {
- gpio-hog;
- gpios = <ASPEED_GPIO(AB, 3) GPIO_ACTIVE_HIGH>;
- output-low;
- line-name = "BMC_WDTRST";
- };
-
- pin_gpio_ac6 {
- gpio-hog;
- gpios = <ASPEED_GPIO(AC, 6) GPIO_ACTIVE_HIGH>;
- output-high;
- line-name = "ESPI_BMC_ALERT_N";
+ line-name = "FW_PSU_ALERT_EN_N";
};
};
--
2.7.4
Powered by blists - more mailing lists