| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20191228203358.23490-11-digetx@gmail.com>
Date: Sat, 28 Dec 2019 23:33:52 +0300
From: Dmitry Osipenko <digetx@...il.com>
To: Rob Herring <robh+dt@...nel.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Peter Chen <Peter.Chen@....com>,
Thierry Reding <thierry.reding@...il.com>,
Jonathan Hunter <jonathanh@...dia.com>,
Felipe Balbi <balbi@...nel.org>
Cc: devicetree@...r.kernel.org, linux-usb@...r.kernel.org,
linux-tegra@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v3 10/16] usb: phy: tegra: Use device-tree notion of reset-GPIO's active-state
It is much more intuitive if reset is treated as asserted when GPIO value
is set to 1. All NVIDIA Tegra device-trees are properly specifying active
state of the reset-GPIO since 2013, let's clean up that part of the code.
Signed-off-by: Dmitry Osipenko <digetx@...il.com>
---
drivers/usb/phy/phy-tegra-usb.c | 58 ++++++++-----------------------
include/linux/usb/tegra_usb_phy.h | 3 +-
2 files changed, 17 insertions(+), 44 deletions(-)
diff --git a/drivers/usb/phy/phy-tegra-usb.c b/drivers/usb/phy/phy-tegra-usb.c
index 1ecd9f7900af..cc6cca4dcecb 100644
--- a/drivers/usb/phy/phy-tegra-usb.c
+++ b/drivers/usb/phy/phy-tegra-usb.c
@@ -306,14 +306,7 @@ static int utmip_pad_close(struct tegra_usb_phy *phy)
static void ulpi_close(struct tegra_usb_phy *phy)
{
- int err;
-
- err = gpio_direction_output(phy->reset_gpio, 0);
- if (err) {
- dev_err(phy->u_phy.dev,
- "ULPI reset GPIO %d direction not asserted: %d\n",
- phy->reset_gpio, err);
- }
+ gpiod_set_value_cansleep(phy->reset_gpio, 1);
}
static int utmip_pad_power_on(struct tegra_usb_phy *phy)
@@ -703,12 +696,7 @@ static int ulpi_phy_power_on(struct tegra_usb_phy *phy)
u32 val;
int err;
- err = gpio_direction_output(phy->reset_gpio, 0);
- if (err) {
- dev_err(phy->u_phy.dev, "GPIO %d not set to 0: %d\n",
- phy->reset_gpio, err);
- return err;
- }
+ gpiod_set_value_cansleep(phy->reset_gpio, 1);
err = clk_prepare_enable(phy->clk);
if (err)
@@ -716,12 +704,7 @@ static int ulpi_phy_power_on(struct tegra_usb_phy *phy)
usleep_range(5000, 10000);
- err = gpio_direction_output(phy->reset_gpio, 1);
- if (err) {
- dev_err(phy->u_phy.dev, "GPIO %d not set to 1: %d\n",
- phy->reset_gpio, err);
- goto disable_clk;
- }
+ gpiod_set_value_cansleep(phy->reset_gpio, 0);
usleep_range(1000, 2000);
@@ -784,8 +767,9 @@ static int ulpi_phy_power_on(struct tegra_usb_phy *phy)
static int ulpi_phy_power_off(struct tegra_usb_phy *phy)
{
clk_disable_unprepare(phy->clk);
+ gpiod_set_value_cansleep(phy->reset_gpio, 1);
- return gpio_direction_output(phy->reset_gpio, 0);
+ return 0;
}
static void tegra_usb_phy_shutdown(struct usb_phy *u_phy)
@@ -837,15 +821,7 @@ static int tegra_usb_phy_set_suspend(struct usb_phy *u_phy, int suspend)
static int ulpi_open(struct tegra_usb_phy *phy)
{
- int err;
-
- err = gpio_direction_output(phy->reset_gpio, 0);
- if (err) {
- dev_err(phy->u_phy.dev,
- "ULPI reset GPIO %d direction not deasserted: %d\n",
- phy->reset_gpio, err);
- return err;
- }
+ gpiod_set_value_cansleep(phy->reset_gpio, 1);
return 0;
}
@@ -1081,6 +1057,7 @@ static int tegra_usb_phy_probe(struct platform_device *pdev)
struct tegra_usb_phy *tegra_phy;
enum usb_phy_interface phy_type;
struct reset_control *reset;
+ struct gpio_desc *gpiod;
struct resource *res;
struct usb_phy *phy;
int err;
@@ -1158,15 +1135,6 @@ static int tegra_usb_phy_probe(struct platform_device *pdev)
case USBPHY_INTERFACE_MODE_ULPI:
tegra_phy->is_ulpi_phy = true;
- tegra_phy->reset_gpio =
- of_get_named_gpio(np, "nvidia,phy-reset-gpio", 0);
-
- if (!gpio_is_valid(tegra_phy->reset_gpio)) {
- dev_err(&pdev->dev,
- "Invalid GPIO: %d\n", tegra_phy->reset_gpio);
- return tegra_phy->reset_gpio;
- }
-
tegra_phy->clk = devm_clk_get(&pdev->dev, "ulpi-link");
err = PTR_ERR_OR_ZERO(tegra_phy->clk);
if (err) {
@@ -1175,13 +1143,17 @@ static int tegra_usb_phy_probe(struct platform_device *pdev)
return err;
}
- err = devm_gpio_request(&pdev->dev, tegra_phy->reset_gpio,
- "ulpi_phy_reset_b");
+ gpiod = devm_gpiod_get_from_of_node(&pdev->dev, np,
+ "nvidia,phy-reset-gpio",
+ 0, GPIOD_OUT_HIGH,
+ "ulpi_phy_reset_b");
+ err = PTR_ERR_OR_ZERO(gpiod);
if (err) {
- dev_err(&pdev->dev, "Request failed for GPIO %d: %d\n",
- tegra_phy->reset_gpio, err);
+ dev_err(&pdev->dev,
+ "Request failed for reset GPIO: %d\n", err);
return err;
}
+ tegra_phy->reset_gpio = gpiod;
phy = devm_otg_ulpi_create(&pdev->dev,
&ulpi_viewport_access_ops, 0);
diff --git a/include/linux/usb/tegra_usb_phy.h b/include/linux/usb/tegra_usb_phy.h
index 0c5c3ea8b2d7..6b857fe13b35 100644
--- a/include/linux/usb/tegra_usb_phy.h
+++ b/include/linux/usb/tegra_usb_phy.h
@@ -17,6 +17,7 @@
#define __TEGRA_USB_PHY_H
#include <linux/clk.h>
+#include <linux/gpio.h>
#include <linux/reset.h>
#include <linux/usb/otg.h>
@@ -76,7 +77,7 @@ struct tegra_usb_phy {
struct usb_phy u_phy;
bool is_legacy_phy;
bool is_ulpi_phy;
- int reset_gpio;
+ struct gpio_desc *reset_gpio;
struct reset_control *pad_rst;
};
--
2.24.0
Powered by blists - more mailing lists