linux-kernel - Re: [PATCH] panel: simple: Add Ivo M133NWF4 R0

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20200102085557.GA29446@ravnborg.org>
Date:   Thu, 2 Jan 2020 09:55:57 +0100
From:   Sam Ravnborg <sam@...nborg.org>
To:     Bjorn Andersson <bjorn.andersson@...aro.org>
Cc:     Thierry Reding <thierry.reding@...il.com>,
        David Airlie <airlied@...ux.ie>,
        Daniel Vetter <daniel@...ll.ch>,
        dri-devel@...ts.freedesktop.org, linux-kernel@...r.kernel.org,
        Rob Clark <robdclark@...il.com>
Subject: Re: [PATCH] panel: simple: Add Ivo M133NWF4 R0

Hi Bjorn.

On Sat, Dec 28, 2019 at 10:06:58PM -0800, Bjorn Andersson wrote:
> The InfoVision Optoelectronics M133NWF4 R0 panel is a 13.3" 1920x1080
> eDP panel, add support for it in panel-simple.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@...aro.org>
> ---
>  drivers/gpu/drm/panel/panel-simple.c | 31 ++++++++++++++++++++++++++++
>  1 file changed, 31 insertions(+)
> 
> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> index ba3f85f36c2f..d7ae0ede2b6e 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -1806,6 +1806,34 @@ static const struct panel_desc innolux_zj070na_01p = {
>  	},
>  };
>  
> +static const struct drm_display_mode ivo_m133nwf4_r0_mode = {
> +	.clock = 138778,
> +	.hdisplay = 1920,
> +	.hsync_start = 1920 + 24,
> +	.hsync_end = 1920 + 24 + 48,
> +	.htotal = 1920 + 24 + 48 + 88,
> +	.vdisplay = 1080,
> +	.vsync_start = 1080 + 3,
> +	.vsync_end = 1080 + 3 + 12,
> +	.vtotal = 1080 + 3 + 12 + 17,
> +	.vrefresh = 60,
> +	.flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC,
> +};
> +
> +static const struct panel_desc ivo_m133nwf4_r0 = {
> +	.modes = &ivo_m133nwf4_r0_mode,
> +	.num_modes = 1,
> +	.bpc = 8,
> +	.size = {
> +		.width = 294,
> +		.height = 165,
> +	},
> +	.delay = {
> +		.hpd_absent_delay = 200,
> +		.unprepare = 500,
> +	},
> +};

For new bindings - at least add connector_type.
And consider bus_format and bus_flags too.


> +
>  static const struct display_timing koe_tx14d24vm1bpa_timing = {
>  	.pixelclock = { 5580000, 5850000, 6200000 },
>  	.hactive = { 320, 320, 320 },
> @@ -3266,6 +3294,9 @@ static const struct of_device_id platform_of_match[] = {
>  	}, {
>  		.compatible = "innolux,zj070na-01p",
>  		.data = &innolux_zj070na_01p,
> +	}, {
> +		.compatible = "ivo,m133nwf4-r0",
Compatible must be documented in a binding file.
We are discussing a new binding format where it is simple to add
a new panel. But no final conclusion yet.

The comments above (in panel_desc and here) also apply for the
other patch you sent.

	Sam