linux-kernel - [PATCH v3 0/9] thermal: tsens: Handle critical interrupts

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <cover.1577976221.git.amit.kucheria@linaro.org>
Date:   Thu,  2 Jan 2020 20:24:25 +0530
From:   Amit Kucheria <amit.kucheria@...aro.org>
To:     linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
        bjorn.andersson@...aro.org, swboyd@...omium.org,
        sivaa@...eaurora.org, Andy Gross <agross@...nel.org>
Cc:     Amit Kucheria <amit.kucheria@...durent.com>,
        devicetree@...r.kernel.org, linux-pm@...r.kernel.org
Subject: [PATCH v3 0/9] thermal: tsens: Handle critical interrupts

TSENS IP v2.x supports critical interrupts and v2.3+ adds watchdog support
in case the FSM is stuck. Enable support in the driver.

This series was generated on top of linux-next from 20191202 to capture
const changes for msm8976 that is queued currently.

Changes from v2:
- Handle old DTBs w/o critical irq in the same way as fix sent for 5.5

Changes from v1:
- Make tsens_features non-const to allow run time detection of features
- Pass tsens_sensor around as a const
- Fix a bug to release dev pointer in success path
- Address review comments from Bjorn and Stephen (thanks for the review)
- Add msm8998 and msm8996 DTSI changes for critical interrupts


Amit Kucheria (9):
  drivers: thermal: tsens: De-constify struct tsens_features
  drivers: thermal: tsens: Pass around struct tsens_sensor as a constant
  drivers: thermal: tsens: use simpler variables
  drivers: thermal: tsens: Release device in success path
  drivers: thermal: tsens: Add critical interrupt support
  drivers: thermal: tsens: Add watchdog support
  arm64: dts: sdm845: thermal: Add critical interrupt support
  arm64: dts: msm8996: thermal: Add critical interrupt support
  arm64: dts: msm8998: thermal: Add critical interrupt support

 arch/arm64/boot/dts/qcom/msm8996.dtsi |  10 +-
 arch/arm64/boot/dts/qcom/msm8998.dtsi |  10 +-
 arch/arm64/boot/dts/qcom/sdm845.dtsi  |  10 +-
 drivers/thermal/qcom/tsens-8960.c     |   4 +-
 drivers/thermal/qcom/tsens-common.c   | 188 +++++++++++++++++++++++---
 drivers/thermal/qcom/tsens-v0_1.c     |   6 +-
 drivers/thermal/qcom/tsens-v1.c       |   6 +-
 drivers/thermal/qcom/tsens-v2.c       |  24 +++-
 drivers/thermal/qcom/tsens.c          |  24 +++-
 drivers/thermal/qcom/tsens.h          | 104 ++++++++++++--
 10 files changed, 330 insertions(+), 56 deletions(-)

-- 
2.20.1