linux-kernel - Re: [PATCH v3 7/9] arm64: dts: sdm845: thermal: Add critical interrupt support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20200102195805.GF988120@minitux>
Date:   Thu, 2 Jan 2020 11:58:05 -0800
From:   Bjorn Andersson <bjorn.andersson@...aro.org>
To:     Amit Kucheria <amit.kucheria@...aro.org>
Cc:     linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
        swboyd@...omium.org, sivaa@...eaurora.org,
        Andy Gross <agross@...nel.org>, devicetree@...r.kernel.org
Subject: Re: [PATCH v3 7/9] arm64: dts: sdm845: thermal: Add critical
 interrupt support

On Thu 02 Jan 06:54 PST 2020, Amit Kucheria wrote:

> Register critical interrupts for each of the two tsens controllers
> 
> Signed-off-by: Amit Kucheria <amit.kucheria@...aro.org>
> Link: https://lore.kernel.org/r/3686bd40c99692feb955e936b608b080e2cb1826.1568624011.git.amit.kucheria@linaro.org

I was under the impression that this series was already picked up, so I
merged the three dts patches last week (it's a nop until the driver is
updated anyways).

Regards,
Bjorn

> ---
>  arch/arm64/boot/dts/qcom/sdm845.dtsi | 10 ++++++----
>  1 file changed, 6 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index ddb1f23c936f..8986553cf2eb 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -2950,8 +2950,9 @@
>  			reg = <0 0x0c263000 0 0x1ff>, /* TM */
>  			      <0 0x0c222000 0 0x1ff>; /* SROT */
>  			#qcom,sensors = <13>;
> -			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>;
> -			interrupt-names = "uplow";
> +			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "uplow", "critical";
>  			#thermal-sensor-cells = <1>;
>  		};
>  
> @@ -2960,8 +2961,9 @@
>  			reg = <0 0x0c265000 0 0x1ff>, /* TM */
>  			      <0 0x0c223000 0 0x1ff>; /* SROT */
>  			#qcom,sensors = <8>;
> -			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>;
> -			interrupt-names = "uplow";
> +			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "uplow", "critical";
>  			#thermal-sensor-cells = <1>;
>  		};
>  
> -- 
> 2.20.1
>