[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1578029793.31107.5.camel@mtksdaap41>
Date: Fri, 3 Jan 2020 13:36:33 +0800
From: CK Hu <ck.hu@...iatek.com>
To: Yongqiang Niu <yongqiang.niu@...iatek.com>
CC: Philipp Zabel <p.zabel@...gutronix.de>,
Rob Herring <robh+dt@...nel.org>,
Matthias Brugger <matthias.bgg@...il.com>,
"David Airlie" <airlied@...ux.ie>, Daniel Vetter <daniel@...ll.ch>,
Mark Rutland <mark.rutland@....com>,
<dri-devel@...ts.freedesktop.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-mediatek@...ts.infradead.org>
Subject: Re: [RESEND PATCH v6 03/17] drm/mediatek: move dsi/dpi select input
into mtk_ddp_sel_in
Hi, Yongqiang:
On Fri, 2020-01-03 at 11:12 +0800, Yongqiang Niu wrote:
> move dsi/dpi select input into mtk_ddp_sel_in
> DPI_SEL_IN_BLS is zero, it is same with hardware default setting,
> DISP_REG_CONFIG_DPI_SEL no need set when bls connect with
> dpi0
I think you have done two things in this patch. One is remove
DISP_REG_CONFIG_DPI_SEL setting, and the other is move
DISP_REG_CONFIG_DSI_SEL from mtk_ddp_sout_sel() to mtk_ddp_sel_in(). So
separate this into two patches.
Regards,
CK
>
> Signed-off-by: Yongqiang Niu <yongqiang.niu@...iatek.com>
> ---
> drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 7 +++----
> 1 file changed, 3 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> index 39700b9..d66ce31 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> @@ -376,6 +376,9 @@ static unsigned int mtk_ddp_sel_in(enum mtk_ddp_comp_id cur,
> } else if (cur == DDP_COMPONENT_BLS && next == DDP_COMPONENT_DSI0) {
> *addr = DISP_REG_CONFIG_DSI_SEL;
> value = DSI_SEL_IN_BLS;
> + } else if (cur == DDP_COMPONENT_BLS && next == DDP_COMPONENT_DPI0) {
> + *addr = DISP_REG_CONFIG_DSI_SEL;
> + value = DSI_SEL_IN_RDMA;
> } else {
> value = 0;
> }
> @@ -393,10 +396,6 @@ static void mtk_ddp_sout_sel(struct regmap *config_regs,
> } else if (cur == DDP_COMPONENT_BLS && next == DDP_COMPONENT_DPI0) {
> regmap_write(config_regs, DISP_REG_CONFIG_OUT_SEL,
> BLS_TO_DPI_RDMA1_TO_DSI);
> - regmap_write(config_regs, DISP_REG_CONFIG_DSI_SEL,
> - DSI_SEL_IN_RDMA);
> - regmap_write(config_regs, DISP_REG_CONFIG_DPI_SEL,
> - DPI_SEL_IN_BLS);
> }
> }
>
Powered by blists - more mailing lists