linux-kernel - [PATCH v5 0/5] add Tegra194 XUSB host and pad controller support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 3 Jan 2020 16:18:09 +0800
From:   JC Kuo <jckuo@...dia.com>
To:     <gregkh@...uxfoundation.org>, <thierry.reding@...il.com>,
        <robh@...nel.org>, <jonathanh@...dia.com>, <kishon@...com>
CC:     <linux-tegra@...r.kernel.org>, <linux-usb@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <nkristam@...dia.com>, JC Kuo <jckuo@...dia.com>
Subject: [PATCH v5 0/5] add Tegra194 XUSB host and pad controller support

This series introduces support for Tegra194 XUSB host and pad
controller. Tegra194 XUSB host and pad controller are highly
similar to the controllers found on Tegra186. Therefore, it's
possible to resue xhci-tegra.c and xusb-tegra186.c for Tegra194.

Changelog:
v5:
  phy: tegra: xusb: Protect Tegra186 soc with config
   - no change

  phy: tegra: xusb: Add Tegra194 support
   - re-use "maximum-speed" instead of adding "nvidia,disable-gen2"

  dt-bindings: phy: tegra: Add Tegra194 support
   - re-use "maximum-speed" instead of adding "nvidia,disable-gen2"

  arm64: tegra: Add XUSB and pad controller on Tegra194
   - no change

  arm64: tegra: Enable XUSB host in P2972-0000 board
   - no change

v4:
  xhci: tegra: Parameterize mailbox register addresses
   - removed from v4 as it has been accepted in v3
  
  usb: host: xhci-tegra: Add Tegra194 XHCI support
   - removed from v4 as it has been accepted in v3

  phy: tegra: xusb: Add Tegra194 support
   - no change

  dt-bindings: phy: tegra: Add Tegra194 support
   - no change

  arm64: tegra: Add XUSB and pad controller on Tegra194
   - no change

  arm64: tegra: Enable XUSB host in P2972-0000 board
   - no change

v3:
  add change log to cover latter

v2:
  xhci: tegra: Parameterize mailbox register addresses
   - no change

  usb: host: xhci-tegra: Add Tegra194 XHCI support
   - no change

  phy: tegra: xusb: Protect Tegra186 soc with config
   - new patch to protect Tegra186 soc data with config

  phy: tegra: xusb: Add Tegra194 support
   - removed unnecessary #if/#endif pairs
   - introduce new soc->supports_gen2 flag which indicate whether or not
     a soc supports USB 3.1 Gen 2 speed

  dt-bindings: phy: tegra: Add Tegra194 support
   - fix a typo

  arm64: tegra: Add XUSB and pad controller on Tegra194
   - renamed xhci@...0000 with usb@...0000
   - moved padctl@...0000 and usb@...0000 inside /cbb
   - cleaned up "clocks" property of usb@...0000 node
   - added blanks lines to visually separate blocks

  arm64: tegra: Enable XUSB host in P2972-0000 board
   - use capitalization of regulator names
   - fix gpio property of VDD_5V_SATA regulator

JC Kuo (5):
  phy: tegra: xusb: Protect Tegra186 soc with config
  phy: tegra: xusb: Add Tegra194 support
  dt-bindings: phy: tegra: Add Tegra194 support
  arm64: tegra: Add XUSB and pad controller on Tegra194
  arm64: tegra: Enable XUSB host in P2972-0000 board

 .../phy/nvidia,tegra124-xusb-padctl.txt       |  18 +++
 .../arm64/boot/dts/nvidia/tegra194-p2888.dtsi |  36 ++++-
 .../boot/dts/nvidia/tegra194-p2972-0000.dts   |  63 ++++++++
 arch/arm64/boot/dts/nvidia/tegra194.dtsi      | 139 +++++++++++++++++
 drivers/phy/tegra/Makefile                    |   1 +
 drivers/phy/tegra/xusb-tegra186.c             | 143 +++++++++++++-----
 drivers/phy/tegra/xusb.c                      |  17 +++
 drivers/phy/tegra/xusb.h                      |   5 +
 8 files changed, 387 insertions(+), 35 deletions(-)

-- 
2.17.1