[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <209fe07a-96d7-98db-7c3b-81a932291bd9@samsung.com>
Date: Fri, 3 Jan 2020 12:51:46 +0100
From: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
To: Peter Rosin <peda@...ntia.se>
Cc: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Jonathan Corbet <corbet@....net>,
"dri-devel@...ts.freedesktop.org" <dri-devel@...ts.freedesktop.org>,
"linux-fbdev@...r.kernel.org" <linux-fbdev@...r.kernel.org>,
"linux-doc@...r.kernel.org" <linux-doc@...r.kernel.org>,
Matthew Wilcox <willy@...radead.org>,
Geert Uytterhoeven <geert@...ux-m68k.org>
Subject: Re: [PATCH v3 1/3] fbdev: fix numbering of fbcon options
On 8/27/19 1:09 PM, Peter Rosin wrote:
> Three shall be the number thou shalt count, and the number of the
> counting shall be three. Four shalt thou not count...
>
> One! Two! Five!
>
> Fixes: efb985f6b265 ("[PATCH] fbcon: Console Rotation - Add framebuffer console documentation")
> Signed-off-by: Peter Rosin <peda@...ntia.se>
Thanks, patch queued for v5.6 (also sorry for the delay).
Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics
> ---
> Documentation/fb/fbcon.rst | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/Documentation/fb/fbcon.rst b/Documentation/fb/fbcon.rst
> index ebca41785abe..65ba40255137 100644
> --- a/Documentation/fb/fbcon.rst
> +++ b/Documentation/fb/fbcon.rst
> @@ -127,7 +127,7 @@ C. Boot options
> is typically located on the same video card. Thus, the consoles that
> are controlled by the VGA console will be garbled.
>
> -4. fbcon=rotate:<n>
> +5. fbcon=rotate:<n>
>
> This option changes the orientation angle of the console display. The
> value 'n' accepts the following:
> @@ -152,21 +152,21 @@ C. Boot options
> Actually, the underlying fb driver is totally ignorant of console
> rotation.
>
> -5. fbcon=margin:<color>
> +6. fbcon=margin:<color>
>
> This option specifies the color of the margins. The margins are the
> leftover area at the right and the bottom of the screen that are not
> used by text. By default, this area will be black. The 'color' value
> is an integer number that depends on the framebuffer driver being used.
>
> -6. fbcon=nodefer
> +7. fbcon=nodefer
>
> If the kernel is compiled with deferred fbcon takeover support, normally
> the framebuffer contents, left in place by the firmware/bootloader, will
> be preserved until there actually is some text is output to the console.
> This option causes fbcon to bind immediately to the fbdev device.
>
> -7. fbcon=logo-pos:<location>
> +8. fbcon=logo-pos:<location>
>
> The only possible 'location' is 'center' (without quotes), and when
> given, the bootup logo is moved from the default top-left corner
Powered by blists - more mailing lists