| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200106010423.5890-4-digetx@gmail.com>
Date: Mon, 6 Jan 2020 04:04:17 +0300
From: Dmitry Osipenko <digetx@...il.com>
To: Thierry Reding <thierry.reding@...il.com>,
Jonathan Hunter <jonathanh@...dia.com>,
Laxman Dewangan <ldewangan@...dia.com>,
Mikko Perttunen <cyndis@...si.fi>,
Wolfram Sang <wsa@...-dreams.de>
Cc: linux-i2c@...r.kernel.org, linux-tegra@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v3 3/9] i2c: tegra: Prevent interrupt triggering after transfer timeout
Potentially it is possible that interrupt may fire after transfer timeout.
That may not end up well for the next transfer because interrupt handling
may race with hardware resetting.
This is very unlikely to happen in practice, but anyway let's prevent the
potential problem by enabling interrupt only at the moments when it is
actually necessary to get some interrupt event.
Signed-off-by: Dmitry Osipenko <digetx@...il.com>
---
drivers/i2c/busses/i2c-tegra.c | 70 +++++++++++++++++-----------------
1 file changed, 36 insertions(+), 34 deletions(-)
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 61339c665ebd..882b283e0ed7 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -16,6 +16,7 @@
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/iopoll.h>
+#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of_device.h>
@@ -230,7 +231,6 @@ struct tegra_i2c_hw_feature {
* @base_phys: physical base address of the I2C controller
* @cont_id: I2C controller ID, used for packet header
* @irq: IRQ number of transfer complete interrupt
- * @irq_disabled: used to track whether or not the interrupt is enabled
* @is_dvc: identifies the DVC I2C controller, has a different register layout
* @msg_complete: transfer completion notifier
* @msg_err: error code for completed message
@@ -240,7 +240,6 @@ struct tegra_i2c_hw_feature {
* @bus_clk_rate: current I2C bus clock rate
* @clk_divisor_non_hs_mode: clock divider for non-high-speed modes
* @is_multimaster_mode: track if I2C controller is in multi-master mode
- * @xfer_lock: lock to serialize transfer submission and processing
* @tx_dma_chan: DMA transmit channel
* @rx_dma_chan: DMA receive channel
* @dma_phys: handle to DMA resources
@@ -260,7 +259,6 @@ struct tegra_i2c_dev {
phys_addr_t base_phys;
int cont_id;
int irq;
- bool irq_disabled;
int is_dvc;
struct completion msg_complete;
int msg_err;
@@ -270,8 +268,6 @@ struct tegra_i2c_dev {
u32 bus_clk_rate;
u16 clk_divisor_non_hs_mode;
bool is_multimaster_mode;
- /* xfer_lock: lock to serialize transfer submission and processing */
- spinlock_t xfer_lock;
struct dma_chan *tx_dma_chan;
struct dma_chan *rx_dma_chan;
dma_addr_t dma_phys;
@@ -790,11 +786,6 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev, bool clk_reinit)
if (err)
return err;
- if (i2c_dev->irq_disabled) {
- i2c_dev->irq_disabled = false;
- enable_irq(i2c_dev->irq);
- }
-
return 0;
}
@@ -825,18 +816,12 @@ static irqreturn_t tegra_i2c_isr(int irq, void *dev_id)
status = i2c_readl(i2c_dev, I2C_INT_STATUS);
- spin_lock(&i2c_dev->xfer_lock);
if (status == 0) {
dev_warn(i2c_dev->dev, "irq status 0 %08x %08x %08x\n",
i2c_readl(i2c_dev, I2C_PACKET_TRANSFER_STATUS),
i2c_readl(i2c_dev, I2C_STATUS),
i2c_readl(i2c_dev, I2C_CNFG));
i2c_dev->msg_err |= I2C_ERR_UNKNOWN_INTERRUPT;
-
- if (!i2c_dev->irq_disabled) {
- disable_irq_nosync(i2c_dev->irq);
- i2c_dev->irq_disabled = true;
- }
goto err;
}
@@ -925,7 +910,6 @@ static irqreturn_t tegra_i2c_isr(int irq, void *dev_id)
complete(&i2c_dev->msg_complete);
done:
- spin_unlock(&i2c_dev->xfer_lock);
return IRQ_HANDLED;
}
@@ -999,6 +983,30 @@ static void tegra_i2c_config_fifo_trig(struct tegra_i2c_dev *i2c_dev,
i2c_writel(i2c_dev, val, reg);
}
+static unsigned long
+tegra_i2c_wait_completion_timeout(struct tegra_i2c_dev *i2c_dev,
+ struct completion *complete,
+ unsigned int timeout_ms)
+{
+ unsigned long ret;
+
+ enable_irq(i2c_dev->irq);
+ ret = wait_for_completion_timeout(complete,
+ msecs_to_jiffies(timeout_ms));
+ disable_irq(i2c_dev->irq);
+
+ /*
+ * There is a chance that completion may happen after IRQ
+ * synchronization, which is done by disable_irq().
+ */
+ if (ret == 0 && completion_done(complete)) {
+ dev_warn(i2c_dev->dev, "completion done after timeout\n");
+ ret = 1;
+ }
+
+ return ret;
+}
+
static int tegra_i2c_issue_bus_clear(struct i2c_adapter *adap)
{
struct tegra_i2c_dev *i2c_dev = i2c_get_adapdata(adap);
@@ -1020,8 +1028,8 @@ static int tegra_i2c_issue_bus_clear(struct i2c_adapter *adap)
i2c_writel(i2c_dev, reg, I2C_BUS_CLEAR_CNFG);
tegra_i2c_unmask_irq(i2c_dev, I2C_INT_BUS_CLR_DONE);
- time_left = wait_for_completion_timeout(&i2c_dev->msg_complete,
- msecs_to_jiffies(50));
+ time_left = tegra_i2c_wait_completion_timeout(
+ i2c_dev, &i2c_dev->msg_complete, 50);
if (time_left == 0) {
dev_err(i2c_dev->dev, "timed out for bus clear\n");
return -ETIMEDOUT;
@@ -1044,7 +1052,6 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
u32 packet_header;
u32 int_mask;
unsigned long time_left;
- unsigned long flags;
size_t xfer_size;
u32 *buffer = NULL;
int err = 0;
@@ -1075,7 +1082,6 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
*/
xfer_time += DIV_ROUND_CLOSEST(((xfer_size * 9) + 2) * MSEC_PER_SEC,
i2c_dev->bus_clk_rate);
- spin_lock_irqsave(&i2c_dev->xfer_lock, flags);
int_mask = I2C_INT_NO_ACK | I2C_INT_ARBITRATION_LOST;
tegra_i2c_unmask_irq(i2c_dev, int_mask);
@@ -1090,7 +1096,7 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
dev_err(i2c_dev->dev,
"starting RX DMA failed, err %d\n",
err);
- goto unlock;
+ return err;
}
} else {
@@ -1149,7 +1155,7 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
dev_err(i2c_dev->dev,
"starting TX DMA failed, err %d\n",
err);
- goto unlock;
+ return err;
}
} else {
tegra_i2c_fill_tx_fifo(i2c_dev);
@@ -1169,15 +1175,10 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
dev_dbg(i2c_dev->dev, "unmasked irq: %02x\n",
i2c_readl(i2c_dev, I2C_INT_MASK));
-unlock:
- spin_unlock_irqrestore(&i2c_dev->xfer_lock, flags);
-
if (dma) {
- if (err)
- return err;
+ time_left = tegra_i2c_wait_completion_timeout(
+ i2c_dev, &i2c_dev->dma_complete, xfer_time);
- time_left = wait_for_completion_timeout(&i2c_dev->dma_complete,
- msecs_to_jiffies(xfer_time));
if (time_left == 0) {
dev_err(i2c_dev->dev, "DMA transfer timeout\n");
dmaengine_terminate_sync(i2c_dev->msg_read ?
@@ -1202,13 +1203,13 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
i2c_dev->tx_dma_chan);
}
- time_left = wait_for_completion_timeout(&i2c_dev->msg_complete,
- msecs_to_jiffies(xfer_time));
+ time_left = tegra_i2c_wait_completion_timeout(
+ i2c_dev, &i2c_dev->msg_complete, xfer_time);
+
tegra_i2c_mask_irq(i2c_dev, int_mask);
if (time_left == 0) {
dev_err(i2c_dev->dev, "i2c transfer timed out\n");
-
tegra_i2c_init(i2c_dev, true);
return -ETIMEDOUT;
}
@@ -1568,7 +1569,6 @@ static int tegra_i2c_probe(struct platform_device *pdev)
I2C_PACKET_HEADER_SIZE;
init_completion(&i2c_dev->msg_complete);
init_completion(&i2c_dev->dma_complete);
- spin_lock_init(&i2c_dev->xfer_lock);
if (!i2c_dev->hw->has_single_clk_source) {
fast_clk = devm_clk_get(&pdev->dev, "fast-clk");
@@ -1644,6 +1644,8 @@ static int tegra_i2c_probe(struct platform_device *pdev)
goto release_dma;
}
+ irq_set_status_flags(i2c_dev->irq, IRQ_NOAUTOEN);
+
ret = devm_request_irq(&pdev->dev, i2c_dev->irq,
tegra_i2c_isr, 0, dev_name(&pdev->dev), i2c_dev);
if (ret) {
--
2.24.0
Powered by blists - more mailing lists