linux-kernel - Re: [PATCH v4 00/14] PHY: Add support for SERDES in TI's J721E SoC

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 6 Jan 2020 12:02:01 +0530
From:   Kishon Vijay Abraham I <kishon@...com>
To:     Rob Herring <robh+dt@...nel.org>,
        Swapnil Kashinath Jakhade <sjakhade@...ence.com>,
        Roger Quadros <rogerq@...com>, Jyri Sarha <jsarha@...com>
CC:     <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH v4 00/14] PHY: Add support for SERDES in TI's J721E SoC



On 16/12/19 3:26 PM, Kishon Vijay Abraham I wrote:
> TI's J721E SoC uses Cadence Sierra SERDES for USB, PCIe and SGMII.
> TI has a wrapper named WIZ to control input signals to Sierra and
> Torrent SERDES.

Merged this series.

Thanks
Kishon

> 
> This patch series:
>  1) Add support to WIZ module present in TI's J721E SoC
>  2) Adapt Cadence Sierra PHY driver to be used for J721E SoC
> 
> Changes from v3:
>  *) Fix Rob's comments on dt bindings
>         -> Add properties to be added in WIZ child nodes to binding
>         -> Use '-' rather than '_' in node names
> 
> Changes from v2:
>  *) Deprecate "phy_clk" binding
>  *) Fix Rob's comment on dt bindings
>         -> Include BSD-2-Clause license identifier
>         -> drop "oneOf" and "items" for compatible
>         -> Fixed "num-lanes" to include only scalar keywords
>         -> Change to 32-bit address space for child nodes
> *) Rename cmn_refclk/cmn_refclk1 to cmn_refclk_dig_div/
>    cmn_refclk1_dig_div
> 
> Changes from v1:
>  *) Change the dt binding Documentation of WIZ wrapper to YAML format
>  *) Fix an issue in Sierra while doimg rmmod
> 
> The series has also been pushed to
> https://github.com/kishon/linux-wip.git j7_serdes_v4
> 
> Anil Varughese (1):
>   phy: cadence: Sierra: Configure both lane cdb and common cdb registers
>     for external SSC
> 
> Kishon Vijay Abraham I (13):
>   dt-bindings: phy: Sierra: Add bindings for Sierra in TI's J721E
>   phy: cadence: Sierra: Make "phy_clk" and "sierra_apb" optional
>     resources
>   phy: cadence: Sierra: Use "regmap" for read and write to Sierra
>     registers
>   phy: cadence: Sierra: Add support for SERDES_16G used in J721E SoC
>   phy: cadence: Sierra: Make cdns_sierra_phy_init() as phy_ops
>   phy: cadence: Sierra: Modify register macro names to be in sync with
>     Sierra user guide
>   phy: cadence: Sierra: Get reset control "array" for each link
>   phy: cadence: Sierra: Check for PLL lock during PHY power on
>   phy: cadence: Sierra: Change MAX_LANES of Sierra to 16
>   phy: cadence: Sierra: Set cmn_refclk_dig_div/cmn_refclk1_dig_div
>     frequency to 25MHz
>   phy: cadence: Sierra: Use correct dev pointer in
>     cdns_sierra_phy_remove()
>   dt-bindings: phy: Document WIZ (SERDES wrapper) bindings
>   phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC
> 
>  .../bindings/phy/phy-cadence-sierra.txt       |  13 +-
>  .../bindings/phy/ti,phy-j721e-wiz.yaml        | 204 ++++
>  drivers/phy/cadence/phy-cadence-sierra.c      | 699 +++++++++++---
>  drivers/phy/ti/Kconfig                        |  15 +
>  drivers/phy/ti/Makefile                       |   1 +
>  drivers/phy/ti/phy-j721e-wiz.c                | 898 ++++++++++++++++++
>  6 files changed, 1691 insertions(+), 139 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
>  create mode 100644 drivers/phy/ti/phy-j721e-wiz.c
>