lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200106110133.13791-5-faiz_abbas@ti.com>
Date:   Mon, 6 Jan 2020 16:31:26 +0530
From:   Faiz Abbas <faiz_abbas@...com>
To:     <linux-omap@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <devicetree@...r.kernel.org>, <linux-mmc@...r.kernel.org>
CC:     <kishon@...com>, <adrian.hunter@...el.com>, <mark.rutland@....com>,
        <robh+dt@...nel.org>, <ulf.hansson@...aro.org>, <tony@...mide.com>,
        <faiz_abbas@...com>
Subject: [PATCH v4 04/11] mmc: sdhci-omap: Add using external dma

From: Chunyan Zhang <zhang.chunyan@...aro.org>

sdhci-omap can support both external dma controller via dmaengine framework
as well as ADMA which standard SD host controller provides.

Fixes by Faiz Abbas <fazi_abbas@...com>:
1. Switch to DMA slave mode when using external DMA
2. Add offset to mapbase

Signed-off-by: Chunyan Zhang <zhang.chunyan@...aro.org>
Signed-off-by: Faiz Abbas <faiz_abbas@...com>
---
 drivers/mmc/host/Kconfig      |  1 +
 drivers/mmc/host/sdhci-omap.c | 16 +++++++++++++++-
 2 files changed, 16 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index adef971582a1..2c0d90b9383e 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -1010,6 +1010,7 @@ config MMC_SDHCI_OMAP
 	depends on MMC_SDHCI_PLTFM && OF
 	select THERMAL
 	imply TI_SOC_THERMAL
+	select MMC_SDHCI_EXTERNAL_DMA if DMA_ENGINE
 	help
 	  This selects the Secure Digital Host Controller Interface (SDHCI)
 	  support present in TI's DRA7 SOCs. The controller supports
diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
index 083e7e053c95..84d85aa743da 100644
--- a/drivers/mmc/host/sdhci-omap.c
+++ b/drivers/mmc/host/sdhci-omap.c
@@ -685,7 +685,11 @@ static int sdhci_omap_enable_dma(struct sdhci_host *host)
 	struct sdhci_omap_host *omap_host = sdhci_pltfm_priv(pltfm_host);
 
 	reg = sdhci_omap_readl(omap_host, SDHCI_OMAP_CON);
-	reg |= CON_DMA_MASTER;
+	reg &= ~CON_DMA_MASTER;
+	/* Switch to DMA slave mode when using external DMA */
+	if (!host->use_external_dma)
+		reg |= CON_DMA_MASTER;
+
 	sdhci_omap_writel(omap_host, SDHCI_OMAP_CON, reg);
 
 	return 0;
@@ -1037,6 +1041,7 @@ static int sdhci_omap_probe(struct platform_device *pdev)
 	const struct of_device_id *match;
 	struct sdhci_omap_data *data;
 	const struct soc_device_attribute *soc;
+	struct resource *regs;
 
 	match = of_match_device(omap_sdhci_match, dev);
 	if (!match)
@@ -1049,6 +1054,10 @@ static int sdhci_omap_probe(struct platform_device *pdev)
 	}
 	offset = data->offset;
 
+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!regs)
+		return -ENXIO;
+
 	host = sdhci_pltfm_init(pdev, &sdhci_omap_pdata,
 				sizeof(*omap_host));
 	if (IS_ERR(host)) {
@@ -1065,6 +1074,7 @@ static int sdhci_omap_probe(struct platform_device *pdev)
 	omap_host->timing = MMC_TIMING_LEGACY;
 	omap_host->flags = data->flags;
 	host->ioaddr += offset;
+	host->mapbase = regs->start + offset;
 
 	mmc = host->mmc;
 	sdhci_get_of_property(pdev);
@@ -1134,6 +1144,10 @@ static int sdhci_omap_probe(struct platform_device *pdev)
 	host->mmc_host_ops.execute_tuning = sdhci_omap_execute_tuning;
 	host->mmc_host_ops.enable_sdio_irq = sdhci_omap_enable_sdio_irq;
 
+	/* Switch to external DMA only if there is the "dmas" property */
+	if (of_find_property(dev->of_node, "dmas", NULL))
+		sdhci_switch_external_dma(host, true);
+
 	ret = sdhci_setup_host(host);
 	if (ret)
 		goto err_put_sync;
-- 
2.19.2

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ