linux-kernel - Re: [PATCH v6 2/2] spi: cadence-quadpsi: Add support for the Cadence QSPI controller

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <66b9f427-83c2-f56c-3d38-fa955429118d@linux.intel.com>
Date:   Mon, 6 Jan 2020 19:19:28 +0800
From:   "Ramuthevar, Vadivel MuruganX" 
        <vadivel.muruganx.ramuthevar@...ux.intel.com>
To:     Vignesh Raghavendra <vigneshr@...com>, broonie@...nel.org,
        linux-spi@...r.kernel.org, linux-kernel@...r.kernel.org
Cc:     robh+dt@...nel.org, dan.carpenter@...cle.com,
        cheol.yong.kim@...el.com, qi-ming.wu@...el.com
Subject: Re: [PATCH v6 2/2] spi: cadence-quadpsi: Add support for the Cadence
 QSPI controller

Hi,

Thank you for the review comments.

On 6/1/2020 6:40 PM, Vignesh Raghavendra wrote:
> Hi,
>
> On 30/12/19 1:11 pm, Ramuthevar,Vadivel MuruganX wrote:
> [...]
>> +static u32 cqspi_cmd2addr(const unsigned char *addr_buf, u32 addr_width)
>> +{
>> +	unsigned int addr = 0;
>> +	int i;
>> +
>> +	/* Invalid address return zero. */
>> +	if (addr_width > 4)
>> +		return 0;
>> +
>> +	for (i = 0; i < addr_width; i++) {
>> +		addr = addr << 8;
>> +		addr |= addr_buf[i];
>> +	}
>> +
>> +	return addr;
>> +}
>> +
> [...]
>> +static int cqspi_apb_read_setup(struct struct_cqspi *cqspi,
>> +				const struct spi_mem_op *op,
>> +				const u8 *addrbuf)
>> +{
>> +	void __iomem *reg_base = cqspi->iobase;
>> +	size_t addrlen = op->addr.nbytes;
>> +	size_t dummy_bytes = op->dummy.nbytes;
>> +	unsigned int addr_value, dummy_clk, reg;
>> +
>> +	if (addrlen) {
>> +		addr_value = cqspi_cmd2addr(&addrbuf[0], addrlen);
>> +		writel(addr_value, reg_base + CQSPI_REG_INDIRECTRDSTARTADDR);
>> +	}
>> +
> Why do you need to swap the address bytes to SPI bus order?
Yes , you are right to align with spi bus order swap is done .
>   You are
> writing to a controller register that accepts 24 bit or 32 bit address.
32bit address.
>> +	reg = op->cmd.opcode << CQSPI_REG_RD_INSTR_OPCODE_LSB;
>> +	reg |= (op->data.buswidth & CQSPI_REG_RD_INSTR_TYPE_DATA_MASK) <<
>> +		CQSPI_REG_RD_INSTR_TYPE_DATA_LSB;
>> +
> This is wrong... op->data.buswidth's range is 1 to 8 whereas
> CQSPI_REG_RD_INSTR_TYPE range is 0 to 3. I wonder whether you tested
> dual/quad mode with this driver?
Yes I have tested with Quad mode since Cadence-IP supports dual/quad on 
my platform, used to validate
before sending the patch that's  standard procedure here.
please let me know if you have any further queries.

---
Best Regards
Vadivel
> I am still unable to get this series to work on my platform. Will
> continue to debug...
>