linux-kernel - [PATCH v4 5/6] dt: bindings: lm3692x: Add ti,brightness-mapping-exponential property

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <3da232fdab3112a54d63bd42d5100c921d5b8b20.1578324703.git.agx@sigxcpu.org>
Date:   Mon,  6 Jan 2020 16:48:54 +0100
From:   Guido Günther <agx@...xcpu.org>
To:     Jacek Anaszewski <jacek.anaszewski@...il.com>,
        Pavel Machek <pavel@....cz>, Dan Murphy <dmurphy@...com>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        linux-leds@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: [PATCH v4 5/6] dt: bindings: lm3692x: Add ti,brightness-mapping-exponential property

This allows to select exponential brightness mode instead of the default
linear mode.

Signed-off-by: Guido Günther <agx@...xcpu.org>
Reviewed-by: Rob Herring <robh@...nel.org>
---
 Documentation/devicetree/bindings/leds/leds-lm3692x.txt | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/leds/leds-lm3692x.txt b/Documentation/devicetree/bindings/leds/leds-lm3692x.txt
index 501468aa4d38..b8939fdd19d6 100644
--- a/Documentation/devicetree/bindings/leds/leds-lm3692x.txt
+++ b/Documentation/devicetree/bindings/leds/leds-lm3692x.txt
@@ -18,6 +18,8 @@ Required properties:
 Optional properties:
 	- enable-gpios : gpio pin to enable/disable the device.
 	- vled-supply : LED supply
+	- ti,brightness-mapping-exponential: Whether to use exponential
+	    brightness mapping
 	- ti,ovp-microvolt: Overvoltage protection in
 	    micro-volt, can be 17000000, 21000000, 25000000 or
 	    29000000. If ti,ovp-microvolt is not specified it
@@ -51,6 +53,7 @@ led-controller@36 {
 	enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
 	vled-supply = <&vbatt>;
 	ti,ovp-microvolt = <29000000>;
+	ti,brightness-mapping-exponential;
 
 	led@0 {
 		reg = <0>;
-- 
2.23.0