linux-kernel - Re: [PATCH net-next v2 0/3] ethtool: allow nesting of begin() and complete() callbacks

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-Id: <20200106.135516.1925975914161500836.davem@redhat.com>
Date:   Mon, 06 Jan 2020 13:55:16 -0800 (PST)
From:   David Miller <davem@...hat.com>
To:     mkubecek@...e.cz
Cc:     netdev@...r.kernel.org, merez@...eaurora.org, kvalo@...eaurora.org,
        linux-wireless@...r.kernel.org, wil6210@....qualcomm.com,
        romieu@...zoreil.com, linux-kernel@...r.kernel.org, andrew@...n.ch,
        f.fainelli@...il.com
Subject: Re: [PATCH net-next v2 0/3] ethtool: allow nesting of begin() and
 complete() callbacks

From: Michal Kubecek <mkubecek@...e.cz>
Date: Mon,  6 Jan 2020 07:39:26 +0100 (CET)

> The ethtool ioctl interface used to guarantee that ethtool_ops callbacks
> were always called in a block between calls to ->begin() and ->complete()
> (if these are defined) and that this whole block was executed with RTNL
> lock held:
> 
> 	rtnl_lock();
> 	ops->begin();
> 	/* other ethtool_ops calls */
> 	ops->complete();
> 	rtnl_unlock();
> 
> This prevented any nesting or crossing of the begin-complete blocks.
> However, this is no longer guaranteed even for ioctl interface as at least
> ethtool_phys_id() releases RTNL lock while waiting for a timer. With the
> introduction of netlink ethtool interface, the begin-complete pairs are
> naturally nested e.g. when a request triggers a netlink notification.
> 
> Fortunately, only minority of networking drivers implements begin() and
> complete() callbacks and most of those that do, fall into three groups:
> 
>   - wrappers for pm_runtime_get_sync() and pm_runtime_put()
>   - wrappers for clk_prepare_enable() and clk_disable_unprepare()
>   - begin() checks netif_running() (fails if false), no complete()
> 
> First two have their own refcounting, third is safe w.r.t. nesting of the
> blocks.
> 
> Only three in-tree networking drivers need an update to deal with nesting
> of begin() and complete() calls: via-velocity and epic100 perform resume
> and suspend on their own and wil6210 completely serializes the calls using
> its own mutex (which would lead to a deadlock if a request request
> triggered a netlink notification). The series addresses these problems.
> 
> changes between v1 and v2:
>   - fix inverted condition in epic100 ethtool_begin() (thanks to Andrew
>     Lunn)

Series applied, thanks.