[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200107205306.737970845@linuxfoundation.org>
Date: Tue, 7 Jan 2020 21:55:00 +0100
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Linus Walleij <linus.walleij@...aro.org>,
Stephan Gerhold <stephan@...hold.net>,
Mark Brown <broonie@...nel.org>
Subject: [PATCH 4.19 090/115] regulator: ab8500: Remove AB8505 USB regulator
From: Stephan Gerhold <stephan@...hold.net>
commit 99c4f70df3a6446c56ca817c2d0f9c12d85d4e7c upstream.
The USB regulator was removed for AB8500 in
commit 41a06aa738ad ("regulator: ab8500: Remove USB regulator").
It was then added for AB8505 in
commit 547f384f33db ("regulator: ab8500: add support for ab8505").
However, there was never an entry added for it in
ab8505_regulator_match. This causes all regulators after it
to be initialized with the wrong device tree data, eventually
leading to an out-of-bounds array read.
Given that it is not used anywhere in the kernel, it seems
likely that similar arguments against supporting it exist for
AB8505 (it is controlled by hardware).
Therefore, simply remove it like for AB8500 instead of adding
an entry in ab8505_regulator_match.
Fixes: 547f384f33db ("regulator: ab8500: add support for ab8505")
Cc: Linus Walleij <linus.walleij@...aro.org>
Signed-off-by: Stephan Gerhold <stephan@...hold.net>
Reviewed-by: Linus Walleij <linus.walleij@...aro.org>
Link: https://lore.kernel.org/r/20191106173125.14496-1-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@...nel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
drivers/regulator/ab8500.c | 17 -----------------
include/linux/regulator/ab8500.h | 1 -
2 files changed, 18 deletions(-)
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -956,23 +956,6 @@ static struct ab8500_regulator_info
.update_val_idle = 0x82,
.update_val_normal = 0x02,
},
- [AB8505_LDO_USB] = {
- .desc = {
- .name = "LDO-USB",
- .ops = &ab8500_regulator_mode_ops,
- .type = REGULATOR_VOLTAGE,
- .id = AB8505_LDO_USB,
- .owner = THIS_MODULE,
- .n_voltages = 1,
- .volt_table = fixed_3300000_voltage,
- },
- .update_bank = 0x03,
- .update_reg = 0x82,
- .update_mask = 0x03,
- .update_val = 0x01,
- .update_val_idle = 0x03,
- .update_val_normal = 0x01,
- },
[AB8505_LDO_AUDIO] = {
.desc = {
.name = "LDO-AUDIO",
--- a/include/linux/regulator/ab8500.h
+++ b/include/linux/regulator/ab8500.h
@@ -38,7 +38,6 @@ enum ab8505_regulator_id {
AB8505_LDO_AUX6,
AB8505_LDO_INTCORE,
AB8505_LDO_ADC,
- AB8505_LDO_USB,
AB8505_LDO_AUDIO,
AB8505_LDO_ANAMIC1,
AB8505_LDO_ANAMIC2,
Powered by blists - more mailing lists