| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1578431066-19600-16-git-send-email-eberman@codeaurora.org>
Date: Tue, 7 Jan 2020 13:04:24 -0800
From: Elliot Berman <eberman@...eaurora.org>
To: Bjorn Andersson <bjorn.andersson@...aro.org>, agross@...nel.org,
swboyd@...omium.org, Stephan Gerhold <stephan@...hold.net>
Cc: Elliot Berman <eberman@...eaurora.org>,
saiprakash.ranjan@...eaurora.org, tsoni@...eaurora.org,
sidgup@...eaurora.org, psodagud@...eaurora.org,
Brian Masney <masneyb@...tation.org>,
linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v5 15/17] firmware: qcom_scm: Order functions, definitions by service/command
Definitions throughout qcom_scm are loosely grouped and loosely ordered.
Sort all the functions/definitions by service ID/command ID to improve
sanity when needing to add new functionality to this driver.
Change-Id: I698443e8e650d4bc9e65ac27d68c46d1e45ba8e3
Acked-by: Bjorn Andersson <bjorn.andersson@...aro.org>
Tested-by: Brian Masney <masneyb@...tation.org> # arm32
Tested-by: Stephan Gerhold <stephan@...hold.net>
Signed-off-by: Elliot Berman <eberman@...eaurora.org>
---
drivers/firmware/qcom_scm.c | 376 ++++++++++++++++++++++----------------------
drivers/firmware/qcom_scm.h | 120 +++++++-------
include/linux/qcom_scm.h | 123 ++++++++-------
3 files changed, 315 insertions(+), 304 deletions(-)
diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index 5efe729..5ba4c85 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -85,33 +85,33 @@ static void qcom_scm_clk_disable(void)
}
/**
- * qcom_scm_set_cold_boot_addr() - Set the cold boot address for cpus
+ * qcom_scm_set_warm_boot_addr() - Set the warm boot address for cpus
* @entry: Entry point function for the cpus
* @cpus: The cpumask of cpus that will use the entry point
*
- * Set the cold boot address of the cpus. Any cpu outside the supported
- * range would be removed from the cpu present mask.
+ * Set the Linux entry point for the SCM to transfer control to when coming
+ * out of a power down. CPU power down may be executed on cpuidle or hotplug.
*/
-int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
+int qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus)
{
- return __qcom_scm_set_cold_boot_addr(__scm ? __scm->dev : NULL, entry,
- cpus);
+ return __qcom_scm_set_warm_boot_addr(__scm->dev, entry, cpus);
}
-EXPORT_SYMBOL(qcom_scm_set_cold_boot_addr);
+EXPORT_SYMBOL(qcom_scm_set_warm_boot_addr);
/**
- * qcom_scm_set_warm_boot_addr() - Set the warm boot address for cpus
+ * qcom_scm_set_cold_boot_addr() - Set the cold boot address for cpus
* @entry: Entry point function for the cpus
* @cpus: The cpumask of cpus that will use the entry point
*
- * Set the Linux entry point for the SCM to transfer control to when coming
- * out of a power down. CPU power down may be executed on cpuidle or hotplug.
+ * Set the cold boot address of the cpus. Any cpu outside the supported
+ * range would be removed from the cpu present mask.
*/
-int qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus)
+int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
{
- return __qcom_scm_set_warm_boot_addr(__scm->dev, entry, cpus);
+ return __qcom_scm_set_cold_boot_addr(__scm ? __scm->dev : NULL, entry,
+ cpus);
}
-EXPORT_SYMBOL(qcom_scm_set_warm_boot_addr);
+EXPORT_SYMBOL(qcom_scm_set_cold_boot_addr);
/**
* qcom_scm_cpu_power_down() - Power down the cpu
@@ -127,107 +127,33 @@ void qcom_scm_cpu_power_down(u32 flags)
}
EXPORT_SYMBOL(qcom_scm_cpu_power_down);
-/**
- * qcom_scm_hdcp_available() - Check if secure environment supports HDCP.
- *
- * Return true if HDCP is supported, false if not.
- */
-bool qcom_scm_hdcp_available(void)
-{
- int ret = qcom_scm_clk_enable();
-
- if (ret)
- return ret;
-
- ret = __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_HDCP,
- QCOM_SCM_HDCP_INVOKE);
-
- qcom_scm_clk_disable();
-
- return ret > 0 ? true : false;
-}
-EXPORT_SYMBOL(qcom_scm_hdcp_available);
-
-/**
- * qcom_scm_hdcp_req() - Send HDCP request.
- * @req: HDCP request array
- * @req_cnt: HDCP request array count
- * @resp: response buffer passed to SCM
- *
- * Write HDCP register(s) through SCM.
- */
-int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp)
-{
- int ret = qcom_scm_clk_enable();
-
- if (ret)
- return ret;
-
- ret = __qcom_scm_hdcp_req(__scm->dev, req, req_cnt, resp);
- qcom_scm_clk_disable();
- return ret;
-}
-EXPORT_SYMBOL(qcom_scm_hdcp_req);
-
-/**
- * qcom_scm_pas_supported() - Check if the peripheral authentication service is
- * available for the given peripherial
- * @peripheral: peripheral id
- *
- * Returns true if PAS is supported for this peripheral, otherwise false.
- */
-bool qcom_scm_pas_supported(u32 peripheral)
+int qcom_scm_set_remote_state(u32 state, u32 id)
{
- int ret;
-
- ret = __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_PIL,
- QCOM_SCM_PIL_PAS_IS_SUPPORTED);
- if (ret <= 0)
- return false;
-
- return __qcom_scm_pas_supported(__scm->dev, peripheral);
+ return __qcom_scm_set_remote_state(__scm->dev, state, id);
}
-EXPORT_SYMBOL(qcom_scm_pas_supported);
+EXPORT_SYMBOL(qcom_scm_set_remote_state);
-/**
- * qcom_scm_ocmem_lock_available() - is OCMEM lock/unlock interface available
- */
-bool qcom_scm_ocmem_lock_available(void)
+static void qcom_scm_set_download_mode(bool enable)
{
- return __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_OCMEM,
- QCOM_SCM_OCMEM_LOCK_CMD);
-}
-EXPORT_SYMBOL(qcom_scm_ocmem_lock_available);
+ bool avail;
+ int ret = 0;
-/**
- * qcom_scm_ocmem_lock() - call OCMEM lock interface to assign an OCMEM
- * region to the specified initiator
- *
- * @id: tz initiator id
- * @offset: OCMEM offset
- * @size: OCMEM size
- * @mode: access mode (WIDE/NARROW)
- */
-int qcom_scm_ocmem_lock(enum qcom_scm_ocmem_client id, u32 offset, u32 size,
- u32 mode)
-{
- return __qcom_scm_ocmem_lock(__scm->dev, id, offset, size, mode);
-}
-EXPORT_SYMBOL(qcom_scm_ocmem_lock);
+ avail = __qcom_scm_is_call_available(__scm->dev,
+ QCOM_SCM_SVC_BOOT,
+ QCOM_SCM_BOOT_SET_DLOAD_MODE);
+ if (avail) {
+ ret = __qcom_scm_set_dload_mode(__scm->dev, enable);
+ } else if (__scm->dload_mode_addr) {
+ ret = __qcom_scm_io_writel(__scm->dev, __scm->dload_mode_addr,
+ enable ? QCOM_SCM_BOOT_SET_DLOAD_MODE : 0);
+ } else {
+ dev_err(__scm->dev,
+ "No available mechanism for setting download mode\n");
+ }
-/**
- * qcom_scm_ocmem_unlock() - call OCMEM unlock interface to release an OCMEM
- * region from the specified initiator
- *
- * @id: tz initiator id
- * @offset: OCMEM offset
- * @size: OCMEM size
- */
-int qcom_scm_ocmem_unlock(enum qcom_scm_ocmem_client id, u32 offset, u32 size)
-{
- return __qcom_scm_ocmem_unlock(__scm->dev, id, offset, size);
+ if (ret)
+ dev_err(__scm->dev, "failed to set download mode: %d\n", ret);
}
-EXPORT_SYMBOL(qcom_scm_ocmem_unlock);
/**
* qcom_scm_pas_init_image() - Initialize peripheral authentication service
@@ -342,6 +268,26 @@ int qcom_scm_pas_shutdown(u32 peripheral)
}
EXPORT_SYMBOL(qcom_scm_pas_shutdown);
+/**
+ * qcom_scm_pas_supported() - Check if the peripheral authentication service is
+ * available for the given peripherial
+ * @peripheral: peripheral id
+ *
+ * Returns true if PAS is supported for this peripheral, otherwise false.
+ */
+bool qcom_scm_pas_supported(u32 peripheral)
+{
+ int ret;
+
+ ret = __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_PIL,
+ QCOM_SCM_PIL_PAS_IS_SUPPORTED);
+ if (ret <= 0)
+ return false;
+
+ return __qcom_scm_pas_supported(__scm->dev, peripheral);
+}
+EXPORT_SYMBOL(qcom_scm_pas_supported);
+
static int qcom_scm_pas_reset_assert(struct reset_controller_dev *rcdev,
unsigned long idx)
{
@@ -365,6 +311,18 @@ static const struct reset_control_ops qcom_scm_pas_reset_ops = {
.deassert = qcom_scm_pas_reset_deassert,
};
+int qcom_scm_io_readl(phys_addr_t addr, unsigned int *val)
+{
+ return __qcom_scm_io_readl(__scm->dev, addr, val);
+}
+EXPORT_SYMBOL(qcom_scm_io_readl);
+
+int qcom_scm_io_writel(phys_addr_t addr, unsigned int val)
+{
+ return __qcom_scm_io_writel(__scm->dev, addr, val);
+}
+EXPORT_SYMBOL(qcom_scm_io_writel);
+
/**
* qcom_scm_restore_sec_cfg_available() - Check if secure environment
* supports restore security config interface.
@@ -396,87 +354,6 @@ int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare)
}
EXPORT_SYMBOL(qcom_scm_iommu_secure_ptbl_init);
-int qcom_scm_qsmmu500_wait_safe_toggle(bool en)
-{
- return __qcom_scm_qsmmu500_wait_safe_toggle(__scm->dev, en);
-}
-EXPORT_SYMBOL(qcom_scm_qsmmu500_wait_safe_toggle);
-
-int qcom_scm_io_readl(phys_addr_t addr, unsigned int *val)
-{
- return __qcom_scm_io_readl(__scm->dev, addr, val);
-}
-EXPORT_SYMBOL(qcom_scm_io_readl);
-
-int qcom_scm_io_writel(phys_addr_t addr, unsigned int val)
-{
- return __qcom_scm_io_writel(__scm->dev, addr, val);
-}
-EXPORT_SYMBOL(qcom_scm_io_writel);
-
-static void qcom_scm_set_download_mode(bool enable)
-{
- bool avail;
- int ret = 0;
-
- avail = __qcom_scm_is_call_available(__scm->dev,
- QCOM_SCM_SVC_BOOT,
- QCOM_SCM_BOOT_SET_DLOAD_MODE);
- if (avail) {
- ret = __qcom_scm_set_dload_mode(__scm->dev, enable);
- } else if (__scm->dload_mode_addr) {
- ret = __qcom_scm_io_writel(__scm->dev, __scm->dload_mode_addr,
- enable ? QCOM_SCM_BOOT_SET_DLOAD_MODE : 0);
- } else {
- dev_err(__scm->dev,
- "No available mechanism for setting download mode\n");
- }
-
- if (ret)
- dev_err(__scm->dev, "failed to set download mode: %d\n", ret);
-}
-
-static int qcom_scm_find_dload_address(struct device *dev, u64 *addr)
-{
- struct device_node *tcsr;
- struct device_node *np = dev->of_node;
- struct resource res;
- u32 offset;
- int ret;
-
- tcsr = of_parse_phandle(np, "qcom,dload-mode", 0);
- if (!tcsr)
- return 0;
-
- ret = of_address_to_resource(tcsr, 0, &res);
- of_node_put(tcsr);
- if (ret)
- return ret;
-
- ret = of_property_read_u32_index(np, "qcom,dload-mode", 1, &offset);
- if (ret < 0)
- return ret;
-
- *addr = res.start + offset;
-
- return 0;
-}
-
-/**
- * qcom_scm_is_available() - Checks if SCM is available
- */
-bool qcom_scm_is_available(void)
-{
- return !!__scm;
-}
-EXPORT_SYMBOL(qcom_scm_is_available);
-
-int qcom_scm_set_remote_state(u32 state, u32 id)
-{
- return __qcom_scm_set_remote_state(__scm->dev, state, id);
-}
-EXPORT_SYMBOL(qcom_scm_set_remote_state);
-
/**
* qcom_scm_assign_mem() - Make a secure call to reassign memory ownership
* @mem_addr: mem region whose ownership need to be reassigned
@@ -559,6 +436,129 @@ int qcom_scm_assign_mem(phys_addr_t mem_addr, size_t mem_sz,
}
EXPORT_SYMBOL(qcom_scm_assign_mem);
+/**
+ * qcom_scm_ocmem_lock_available() - is OCMEM lock/unlock interface available
+ */
+bool qcom_scm_ocmem_lock_available(void)
+{
+ return __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_OCMEM,
+ QCOM_SCM_OCMEM_LOCK_CMD);
+}
+EXPORT_SYMBOL(qcom_scm_ocmem_lock_available);
+
+/**
+ * qcom_scm_ocmem_lock() - call OCMEM lock interface to assign an OCMEM
+ * region to the specified initiator
+ *
+ * @id: tz initiator id
+ * @offset: OCMEM offset
+ * @size: OCMEM size
+ * @mode: access mode (WIDE/NARROW)
+ */
+int qcom_scm_ocmem_lock(enum qcom_scm_ocmem_client id, u32 offset, u32 size,
+ u32 mode)
+{
+ return __qcom_scm_ocmem_lock(__scm->dev, id, offset, size, mode);
+}
+EXPORT_SYMBOL(qcom_scm_ocmem_lock);
+
+/**
+ * qcom_scm_ocmem_unlock() - call OCMEM unlock interface to release an OCMEM
+ * region from the specified initiator
+ *
+ * @id: tz initiator id
+ * @offset: OCMEM offset
+ * @size: OCMEM size
+ */
+int qcom_scm_ocmem_unlock(enum qcom_scm_ocmem_client id, u32 offset, u32 size)
+{
+ return __qcom_scm_ocmem_unlock(__scm->dev, id, offset, size);
+}
+EXPORT_SYMBOL(qcom_scm_ocmem_unlock);
+
+/**
+ * qcom_scm_hdcp_available() - Check if secure environment supports HDCP.
+ *
+ * Return true if HDCP is supported, false if not.
+ */
+bool qcom_scm_hdcp_available(void)
+{
+ int ret = qcom_scm_clk_enable();
+
+ if (ret)
+ return ret;
+
+ ret = __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_HDCP,
+ QCOM_SCM_HDCP_INVOKE);
+
+ qcom_scm_clk_disable();
+
+ return ret > 0 ? true : false;
+}
+EXPORT_SYMBOL(qcom_scm_hdcp_available);
+
+/**
+ * qcom_scm_hdcp_req() - Send HDCP request.
+ * @req: HDCP request array
+ * @req_cnt: HDCP request array count
+ * @resp: response buffer passed to SCM
+ *
+ * Write HDCP register(s) through SCM.
+ */
+int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp)
+{
+ int ret = qcom_scm_clk_enable();
+
+ if (ret)
+ return ret;
+
+ ret = __qcom_scm_hdcp_req(__scm->dev, req, req_cnt, resp);
+ qcom_scm_clk_disable();
+ return ret;
+}
+EXPORT_SYMBOL(qcom_scm_hdcp_req);
+
+int qcom_scm_qsmmu500_wait_safe_toggle(bool en)
+{
+ return __qcom_scm_qsmmu500_wait_safe_toggle(__scm->dev, en);
+}
+EXPORT_SYMBOL(qcom_scm_qsmmu500_wait_safe_toggle);
+
+static int qcom_scm_find_dload_address(struct device *dev, u64 *addr)
+{
+ struct device_node *tcsr;
+ struct device_node *np = dev->of_node;
+ struct resource res;
+ u32 offset;
+ int ret;
+
+ tcsr = of_parse_phandle(np, "qcom,dload-mode", 0);
+ if (!tcsr)
+ return 0;
+
+ ret = of_address_to_resource(tcsr, 0, &res);
+ of_node_put(tcsr);
+ if (ret)
+ return ret;
+
+ ret = of_property_read_u32_index(np, "qcom,dload-mode", 1, &offset);
+ if (ret < 0)
+ return ret;
+
+ *addr = res.start + offset;
+
+ return 0;
+}
+
+/**
+ * qcom_scm_is_available() - Checks if SCM is available
+ */
+bool qcom_scm_is_available(void)
+{
+ return !!__scm;
+}
+EXPORT_SYMBOL(qcom_scm_is_available);
+
static int qcom_scm_probe(struct platform_device *pdev)
{
struct qcom_scm *scm;
diff --git a/drivers/firmware/qcom_scm.h b/drivers/firmware/qcom_scm.h
index a022556..56ace3b 100644
--- a/drivers/firmware/qcom_scm.h
+++ b/drivers/firmware/qcom_scm.h
@@ -4,64 +4,83 @@
#ifndef __QCOM_SCM_INT_H
#define __QCOM_SCM_INT_H
-#define QCOM_SCM_SVC_BOOT 0x1
-#define QCOM_SCM_BOOT_SET_ADDR 0x1
-#define QCOM_SCM_BOOT_SET_DLOAD_MODE 0x10
-#define QCOM_SCM_BOOT_SET_REMOTE_STATE 0xa
-extern int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id);
-extern int __qcom_scm_set_dload_mode(struct device *dev, bool enable);
-
+#define QCOM_SCM_SVC_BOOT 0x01
+#define QCOM_SCM_BOOT_SET_ADDR 0x01
+#define QCOM_SCM_BOOT_TERMINATE_PC 0x02
+#define QCOM_SCM_BOOT_SET_DLOAD_MODE 0x10
+#define QCOM_SCM_BOOT_SET_REMOTE_STATE 0x0a
extern int __qcom_scm_set_warm_boot_addr(struct device *dev, void *entry,
const cpumask_t *cpus);
extern int __qcom_scm_set_cold_boot_addr(struct device *dev, void *entry,
const cpumask_t *cpus);
-
-#define QCOM_SCM_BOOT_TERMINATE_PC 0x2
-#define QCOM_SCM_FLUSH_FLAG_MASK 0x3
extern void __qcom_scm_cpu_power_down(struct device *dev, u32 flags);
+extern int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id);
+extern int __qcom_scm_set_dload_mode(struct device *dev, bool enable);
+#define QCOM_SCM_FLUSH_FLAG_MASK 0x3
+
+#define QCOM_SCM_SVC_PIL 0x02
+#define QCOM_SCM_PIL_PAS_INIT_IMAGE 0x01
+#define QCOM_SCM_PIL_PAS_MEM_SETUP 0x02
+#define QCOM_SCM_PIL_PAS_AUTH_AND_RESET 0x05
+#define QCOM_SCM_PIL_PAS_SHUTDOWN 0x06
+#define QCOM_SCM_PIL_PAS_IS_SUPPORTED 0x07
+#define QCOM_SCM_PIL_PAS_MSS_RESET 0x0a
+extern bool __qcom_scm_pas_supported(struct device *dev, u32 peripheral);
+extern int __qcom_scm_pas_init_image(struct device *dev, u32 peripheral,
+ dma_addr_t metadata_phys);
+extern int __qcom_scm_pas_mem_setup(struct device *dev, u32 peripheral,
+ phys_addr_t addr, phys_addr_t size);
+extern int __qcom_scm_pas_auth_and_reset(struct device *dev, u32 peripheral);
+extern int __qcom_scm_pas_shutdown(struct device *dev, u32 peripheral);
+extern int __qcom_scm_pas_mss_reset(struct device *dev, bool reset);
-#define QCOM_SCM_SVC_IO 0x5
-#define QCOM_SCM_IO_READ 0x1
-#define QCOM_SCM_IO_WRITE 0x2
+#define QCOM_SCM_SVC_IO 0x05
+#define QCOM_SCM_IO_READ 0x01
+#define QCOM_SCM_IO_WRITE 0x02
extern int __qcom_scm_io_readl(struct device *dev, phys_addr_t addr, unsigned int *val);
extern int __qcom_scm_io_writel(struct device *dev, phys_addr_t addr, unsigned int val);
-#define QCOM_SCM_SVC_INFO 0x6
-#define QCOM_SCM_INFO_IS_CALL_AVAIL 0x1
+#define QCOM_SCM_SVC_INFO 0x06
+#define QCOM_SCM_INFO_IS_CALL_AVAIL 0x01
extern int __qcom_scm_is_call_available(struct device *dev, u32 svc_id,
u32 cmd_id);
-#define QCOM_SCM_SVC_HDCP 0x11
-#define QCOM_SCM_HDCP_INVOKE 0x01
-extern int __qcom_scm_hdcp_req(struct device *dev,
- struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp);
-
-extern void __qcom_scm_init(void);
-
-#define QCOM_SCM_SVC_OCMEM 0xf
-#define QCOM_SCM_OCMEM_LOCK_CMD 0x1
-#define QCOM_SCM_OCMEM_UNLOCK_CMD 0x2
+#define QCOM_SCM_SVC_MP 0x0c
+#define QCOM_SCM_MP_RESTORE_SEC_CFG 0x02
+#define QCOM_SCM_MP_IOMMU_SECURE_PTBL_SIZE 0x03
+#define QCOM_SCM_MP_IOMMU_SECURE_PTBL_INIT 0x04
+#define QCOM_SCM_MP_ASSIGN 0x16
+extern int __qcom_scm_restore_sec_cfg(struct device *dev, u32 device_id,
+ u32 spare);
+extern int __qcom_scm_iommu_secure_ptbl_size(struct device *dev, u32 spare,
+ size_t *size);
+extern int __qcom_scm_iommu_secure_ptbl_init(struct device *dev, u64 addr,
+ u32 size, u32 spare);
+extern int __qcom_scm_assign_mem(struct device *dev,
+ phys_addr_t mem_region, size_t mem_sz,
+ phys_addr_t src, size_t src_sz,
+ phys_addr_t dest, size_t dest_sz);
+#define QCOM_SCM_SVC_OCMEM 0x0f
+#define QCOM_SCM_OCMEM_LOCK_CMD 0x01
+#define QCOM_SCM_OCMEM_UNLOCK_CMD 0x02
extern int __qcom_scm_ocmem_lock(struct device *dev, u32 id, u32 offset,
u32 size, u32 mode);
extern int __qcom_scm_ocmem_unlock(struct device *dev, u32 id, u32 offset,
u32 size);
-#define QCOM_SCM_SVC_PIL 0x2
-#define QCOM_SCM_PIL_PAS_INIT_IMAGE 0x1
-#define QCOM_SCM_PIL_PAS_MEM_SETUP 0x2
-#define QCOM_SCM_PIL_PAS_AUTH_AND_RESET 0x5
-#define QCOM_SCM_PIL_PAS_SHUTDOWN 0x6
-#define QCOM_SCM_PIL_PAS_IS_SUPPORTED 0x7
-#define QCOM_SCM_PIL_PAS_MSS_RESET 0xa
-extern bool __qcom_scm_pas_supported(struct device *dev, u32 peripheral);
-extern int __qcom_scm_pas_init_image(struct device *dev, u32 peripheral,
- dma_addr_t metadata_phys);
-extern int __qcom_scm_pas_mem_setup(struct device *dev, u32 peripheral,
- phys_addr_t addr, phys_addr_t size);
-extern int __qcom_scm_pas_auth_and_reset(struct device *dev, u32 peripheral);
-extern int __qcom_scm_pas_shutdown(struct device *dev, u32 peripheral);
-extern int __qcom_scm_pas_mss_reset(struct device *dev, bool reset);
+#define QCOM_SCM_SVC_HDCP 0x11
+#define QCOM_SCM_HDCP_INVOKE 0x01
+extern int __qcom_scm_hdcp_req(struct device *dev,
+ struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp);
+
+#define QCOM_SCM_SVC_SMMU_PROGRAM 0x15
+#define QCOM_SCM_SMMU_CONFIG_ERRATA1 0x03
+#define QCOM_SCM_SMMU_CONFIG_ERRATA1_CLIENT_ALL 0x02
+extern int __qcom_scm_qsmmu500_wait_safe_toggle(struct device *dev,
+ bool enable);
+
+extern void __qcom_scm_init(void);
/* common error codes */
#define QCOM_SCM_V2_EBUSY -12
@@ -90,25 +109,4 @@ static inline int qcom_scm_remap_error(int err)
return -EINVAL;
}
-#define QCOM_SCM_SVC_MP 0xc
-#define QCOM_SCM_MP_RESTORE_SEC_CFG 2
-extern int __qcom_scm_restore_sec_cfg(struct device *dev, u32 device_id,
- u32 spare);
-#define QCOM_SCM_MP_IOMMU_SECURE_PTBL_SIZE 3
-#define QCOM_SCM_MP_IOMMU_SECURE_PTBL_INIT 4
-#define QCOM_SCM_SVC_SMMU_PROGRAM 0x15
-#define QCOM_SCM_SMMU_CONFIG_ERRATA1 0x3
-#define QCOM_SCM_SMMU_CONFIG_ERRATA1_CLIENT_ALL 0x2
-extern int __qcom_scm_iommu_secure_ptbl_size(struct device *dev, u32 spare,
- size_t *size);
-extern int __qcom_scm_iommu_secure_ptbl_init(struct device *dev, u64 addr,
- u32 size, u32 spare);
-extern int __qcom_scm_qsmmu500_wait_safe_toggle(struct device *dev,
- bool enable);
-#define QCOM_SCM_MP_ASSIGN 0x16
-extern int __qcom_scm_assign_mem(struct device *dev,
- phys_addr_t mem_region, size_t mem_sz,
- phys_addr_t src, size_t src_sz,
- phys_addr_t dest, size_t dest_sz);
-
#endif
diff --git a/include/linux/qcom_scm.h b/include/linux/qcom_scm.h
index 98e775d..3d6a246 100644
--- a/include/linux/qcom_scm.h
+++ b/include/linux/qcom_scm.h
@@ -1,5 +1,5 @@
/* SPDX-License-Identifier: GPL-2.0-only */
-/* Copyright (c) 2010-2015, 2018, The Linux Foundation. All rights reserved.
+/* Copyright (c) 2010-2015, 2018-2019 The Linux Foundation. All rights reserved.
* Copyright (C) 2015 Linaro Ltd.
*/
#ifndef __QCOM_SCM_H
@@ -55,81 +55,94 @@ enum qcom_scm_sec_dev_id {
#define QCOM_SCM_PERM_RWX (QCOM_SCM_PERM_RW | QCOM_SCM_PERM_EXEC)
#if IS_ENABLED(CONFIG_QCOM_SCM)
+extern bool qcom_scm_is_available(void);
+
extern int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus);
extern int qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus);
-extern bool qcom_scm_is_available(void);
-extern bool qcom_scm_hdcp_available(void);
-extern int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt,
- u32 *resp);
-extern bool qcom_scm_ocmem_lock_available(void);
-extern int qcom_scm_ocmem_lock(enum qcom_scm_ocmem_client id, u32 offset,
- u32 size, u32 mode);
-extern int qcom_scm_ocmem_unlock(enum qcom_scm_ocmem_client id, u32 offset,
- u32 size);
-extern bool qcom_scm_pas_supported(u32 peripheral);
+extern void qcom_scm_cpu_power_down(u32 flags);
+extern int qcom_scm_set_remote_state(u32 state, u32 id);
+
extern int qcom_scm_pas_init_image(u32 peripheral, const void *metadata,
size_t size);
extern int qcom_scm_pas_mem_setup(u32 peripheral, phys_addr_t addr,
phys_addr_t size);
extern int qcom_scm_pas_auth_and_reset(u32 peripheral);
extern int qcom_scm_pas_shutdown(u32 peripheral);
-extern int qcom_scm_assign_mem(phys_addr_t mem_addr, size_t mem_sz,
- unsigned int *src,
- const struct qcom_scm_vmperm *newvm,
- unsigned int dest_cnt);
-extern void qcom_scm_cpu_power_down(u32 flags);
-extern int qcom_scm_set_remote_state(u32 state, u32 id);
+extern bool qcom_scm_pas_supported(u32 peripheral);
+
+extern int qcom_scm_io_readl(phys_addr_t addr, unsigned int *val);
+extern int qcom_scm_io_writel(phys_addr_t addr, unsigned int val);
+
extern bool qcom_scm_restore_sec_cfg_available(void);
extern int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare);
extern int qcom_scm_iommu_secure_ptbl_size(u32 spare, size_t *size);
extern int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare);
+extern int qcom_scm_assign_mem(phys_addr_t mem_addr, size_t mem_sz,
+ unsigned int *src,
+ const struct qcom_scm_vmperm *newvm,
+ unsigned int dest_cnt);
+
+extern bool qcom_scm_ocmem_lock_available(void);
+extern int qcom_scm_ocmem_lock(enum qcom_scm_ocmem_client id, u32 offset,
+ u32 size, u32 mode);
+extern int qcom_scm_ocmem_unlock(enum qcom_scm_ocmem_client id, u32 offset,
+ u32 size);
+
+extern bool qcom_scm_hdcp_available(void);
+extern int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt,
+ u32 *resp);
+
extern int qcom_scm_qsmmu500_wait_safe_toggle(bool en);
-extern int qcom_scm_io_readl(phys_addr_t addr, unsigned int *val);
-extern int qcom_scm_io_writel(phys_addr_t addr, unsigned int val);
#else
#include <linux/errno.h>
-static inline
-int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
-{
- return -ENODEV;
-}
-static inline
-int qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus)
-{
- return -ENODEV;
-}
static inline bool qcom_scm_is_available(void) { return false; }
-static inline bool qcom_scm_hdcp_available(void) { return false; }
-static inline int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt,
- u32 *resp) { return -ENODEV; }
-static inline bool qcom_scm_ocmem_lock_available(void) { return false; }
-static inline int qcom_scm_ocmem_lock(enum qcom_scm_ocmem_client id, u32 offset,
- u32 size, u32 mode) { return -ENODEV; }
-static inline int qcom_scm_ocmem_unlock(enum qcom_scm_ocmem_client id, u32 offset,
- u32 size) { return -ENODEV; }
-static inline bool qcom_scm_pas_supported(u32 peripheral) { return false; }
+
+static inline int qcom_scm_set_cold_boot_addr(void *entry,
+ const cpumask_t *cpus) { return -ENODEV; }
+static inline int qcom_scm_set_warm_boot_addr(void *entry,
+ const cpumask_t *cpus) { return -ENODEV; }
+static inline void qcom_scm_cpu_power_down(u32 flags) {}
+static inline u32 qcom_scm_set_remote_state(u32 state,u32 id)
+ { return -ENODEV; }
+
static inline int qcom_scm_pas_init_image(u32 peripheral, const void *metadata,
- size_t size) { return -ENODEV; }
+ size_t size) { return -ENODEV; }
static inline int qcom_scm_pas_mem_setup(u32 peripheral, phys_addr_t addr,
- phys_addr_t size) { return -ENODEV; }
-static inline int
-qcom_scm_pas_auth_and_reset(u32 peripheral) { return -ENODEV; }
+ phys_addr_t size) { return -ENODEV; }
+static inline int qcom_scm_pas_auth_and_reset(u32 peripheral)
+ { return -ENODEV; }
static inline int qcom_scm_pas_shutdown(u32 peripheral) { return -ENODEV; }
-static inline int qcom_scm_assign_mem(phys_addr_t mem_addr, size_t mem_sz,
- unsigned int *src,
- const struct qcom_scm_vmperm *newvm,
- unsigned int dest_cnt) { return -ENODEV; }
-static inline void qcom_scm_cpu_power_down(u32 flags) {}
-static inline u32
-qcom_scm_set_remote_state(u32 state,u32 id) { return -ENODEV; }
+static inline bool qcom_scm_pas_supported(u32 peripheral) { return false; }
+
+static inline int qcom_scm_io_readl(phys_addr_t addr, unsigned int *val)
+ { return -ENODEV; }
+static inline int qcom_scm_io_writel(phys_addr_t addr, unsigned int val)
+ { return -ENODEV; }
+
static inline bool qcom_scm_restore_sec_cfg_available(void) { return false; }
-static inline int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare) { return -ENODEV; }
-static inline int qcom_scm_iommu_secure_ptbl_size(u32 spare, size_t *size) { return -ENODEV; }
-static inline int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare) { return -ENODEV; }
-static inline int qcom_scm_qsmmu500_wait_safe_toggle(bool en) { return -ENODEV; }
-static inline int qcom_scm_io_readl(phys_addr_t addr, unsigned int *val) { return -ENODEV; }
-static inline int qcom_scm_io_writel(phys_addr_t addr, unsigned int val) { return -ENODEV; }
+static inline int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare)
+ { return -ENODEV; }
+static inline int qcom_scm_iommu_secure_ptbl_size(u32 spare, size_t *size)
+ { return -ENODEV; }
+static inline int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare)
+ { return -ENODEV; }
+static inline int qcom_scm_assign_mem(phys_addr_t mem_addr, size_t mem_sz,
+ unsigned int *src, const struct qcom_scm_vmperm *newvm,
+ unsigned int dest_cnt) { return -ENODEV; }
+
+static inline bool qcom_scm_ocmem_lock_available(void) { return false; }
+static inline int qcom_scm_ocmem_lock(enum qcom_scm_ocmem_client id, u32 offset,
+ u32 size, u32 mode) { return -ENODEV; }
+static inline int qcom_scm_ocmem_unlock(enum qcom_scm_ocmem_client id,
+ u32 offset, u32 size) { return -ENODEV; }
+
+static inline bool qcom_scm_hdcp_available(void) { return false; }
+static inline int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt,
+ u32 *resp) { return -ENODEV; }
+
+static inline int qcom_scm_qsmmu500_wait_safe_toggle(bool en)
+ { return -ENODEV; }
#endif
#endif
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
Powered by blists - more mailing lists